IBM 4400-006 User Manual - Page 150

Chapter 7 Novell Ethernet Interface Configuration (10/100Base-T) Print Server Setup - HTML Method 1. Load a Web browser on a network station that can communicate with the print server over TCP/IP. 2. Direct your Web browser to URL: http://EthernetInterfaceIPaddress/ networkConf.html (e.g., http://192.75.11.9/networkConf.html). NOTE: If prompted for a "User ID" and password first, type root for the ID and press ENTER at the password prompt (since there is no password by default). 3. Look under the "Novell" section and add the new password to the "Pserver Password" field. NOTE: The passwords entered in Netware Administrator or PCONSOLE must match the password set on the unit. 4. Click the SUBMIT button when done and physically repower the printer to make the new settings take effect. Print Server Setup - Manual (Telnet) Method 1. Telnet to the print server: telnet ipaddress NOTE: If prompted for a "User ID" and password first, type root for the ID and press ENTER at the password prompt since there is no password by default. 2. You should see a prompt with the Ethernet Interface IP address: ipaddress:root> 3. At the prompt, enter: store pserver novell passwd password NOTE: The passwords entered in Netware Administrator or PCONSOLE must match the password set on the unit. 4. Reset the unit to ensure the changes take effect: reset 150