JVC DVP9 Instruction Manual - Page 142
Using Windows® Messenger (Windows® XP Only), Preparation
UPC - 046838161100
View all JVC DVP9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
42 EN CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET (cont.) Using Windows® Messenger (Windows® XP Only) If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. Preparation 1 Confirm that Windows® Messenger® 4.6 or later is installed. ● You can download the latest version of Windows® Messenger from Microsoft's web site: http://www.microsoft.com/ 2 Connect to the Internet and set up Windows® Messenger. ● Start Windows® Messenger and register your e-mail address and other information. For details, refer to the Windows® Messenger help. 3 Install [USB Video Streaming driver]. ● Refer to "Software Installation (Windows®)" (੬ pg. 5) in the Software Installation and USB Connection Guide. ● If the installation of [USB Video Streaming driver] has already been completed, go to step 4. 4 Connect the camcorder to the PC with a USB cable. ● Refer to "Connections (Windows®)" (੬ pg. 9) in the Software Installation and USB Connection Guide. 5 Set the camcorder to the memory card recording mode. The camcorder is now on. " " appears on the camcorder's LCD monitor. ● If " " does not appear, install [USB Video Streaming driver]. Refer to "Software Installation (Windows®)" (੬ pg. 5) in the Software Installation and USB Connection Guide. NOTE: The procedure is different when reading or writing a memory card. 6 In the main screen of Windows® Messenger, click [Tools] and then select [Audio and Video Tuning Wizard...]. 7 Select [JVC PIX-MCV Video Capture] and then click [Next]. ● Make sure that the image from the camcorder is displayed. 8 Click [Next]. In the microphone setting, specify [JVC PIX-MCV Audio Capture]. In the speaker setting, specify the sound board that you are using. ● If you specify [JVC PIX-MCV Audio Capture] for the microphone setting, you cannot select [Use headphones]. 9 Click [Next]. Check the speaker or headphone volume. ● Click [Test] and check for sound from your speakers or headphones. 10 Click [Next]. Check the microphone volume. ● The microphone volume is automatically adjusted. Speak into the camcorder microphone and check the microphone volume level so that the green bar extends into the yellow range. 11 Click [Next] and exit the Wizard.