JVC DVP9 Instruction Manual - Page 46
Recording Digital Sound Effects, NAVIGATION Function - software
UPC - 046838161100
View all JVC DVP9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
46 EN NAVI STORE Button VIDEO/MEMORY Switch Power Switch Lock Button D.SOUND Button SNAPSHOT Button INDEX/NAVI Button MENU Button +, - Button SET/SELECT Button Recording Digital Sound Effects The sound effects pre-stored in the provided memory card can be dubbed onto a tape. 1 Load a cassette. (੬ pg. 15) 2 Load the provided memory card. (੬ pg. 16) 3 Set the VIDEO/MEMORY Switch to "VIDEO". 4 Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch. 5 Open the LCD monitor fully, or pull out the viewfinder fully. 6 Press INDEX. The Index Screen for sound effects (੬ pg. 26) appears. I NDEX EXPLOS I ON S I REN L AUGH T ER RACE CAR DOOR BEL L BUZ Z ER FANFARE Selected Sound 7 Press + or - to select the desired sound effect. 8 Press SET/SELECT. ● Pressing D.SOUND starts playback of the currently selected sound effect. You can check it without recording it onto the tape. Press D.SOUND again to stop the sound effect playback midway. FEATURES FOR RECORDING (cont.) 9 Press D.SOUND during recording. The selected sound effect indication with a " " mark appears moving and the sound effect is recorded onto the tape. ● The sound effect cannot be heard from the speaker during recording. Connect a headphone to the headphone connector to hear the sound effect. To cancel recording the sound effect midway... Press D.SOUND again. The camcorder stops recording the sound effect and the sound effect indication disappears. Downloading sound data from Web Site You can download sound data available at our Web Site (see below for URL) and transfer them from your PC to the memory card using a USB cable to create more sound effects. http://www.jvc-victor.co.jp/english/download/ d-sound/index.html ● You can also use the PC card adapter CU-VPSD60, floppy adapter CU-VFSD50 or USB reader/writer CU-VUSD70 to transfer sound data from a PC to the memory card. ● Sound data should be copied into the memory card's DCSD\100JVCGR folder. ● The file names should be in numerical sequence starting from DVC00001.mp3. If you are using the provided memory card, file names should be from DVC00013.mp3 since 12 sound effects are prestored as DVC00001.mp3 through DVC00012.mp3. NOTES: ● Sound effects can also be used for Audio Dubbing. (੬ pg. 56) ● Sound effects can also be selected during D.S.C. playback mode. (੬ pg. 25, 26) ● Sound effects created on a PC can be transferred to a memory card by copying them into the memory card's sound folder with the specified file name. For details, refer to the instruction manual of the provided software. However, some sound (effects) created on a PC cannot be played back with this camcorder. NAVIGATION Function The Navigation Function helps you check tape contents by making thumbnail images on a memory card.