JVC DVP9 Instruction Manual - Page 20

20 EN Normal Playback VOL. +/- Button VIDEO/MEMORY Switch Play/Pause Button (4/9) Power Switch Speaker Stop Button (8) Lock Button SHUTTLE SEARCH Ring (3/5) VIDEO PLAYBACK ● LCD monitor/viewfinder indications: • When power is supplied from a battery: the " " battery indicator is displayed. (੬ pg. 80) • When power is supplied from an AC outlet: the " " battery indicator does not appear. ● When the S/AV/Editing cable is connected to the S/AV connector, the sound is not heard from the speaker. To control the speaker volume... Press VOL. + to turn up the volume, or VOL. - to turn down the volume. Still Playback Pauses during video playback. 1) Press 4/9 during playback. 2) To resume normal playback, press 4/9 again. ● If still playback continues for more than about 3 minutes, the camcorder's Stop mode is automatically engaged. ● When 4/9 is pressed, the image may not pause immediately while the camcorder stabilises the still image. MENU Button SET/SELECT Button 1 Load a cassette. (੬ pg. 15) 2 Set the VIDEO/MEMORY Switch to "VIDEO". 3 Set the Power Switch to "P" while pressing down the Lock Button located on the switch. 4 To start playback, press 4/9. 5 To stop playback, press 8. ● During Stop mode, turn the SHUTTLE SEARCH Ring to the left (3) to rewind, or to the right (5) to fast-forward the tape. NOTES: ● Clean the video heads using an optional dry cleaning cassette when: • No picture during playback. • Blocks of noise appear during playback. For details, ੬ pg. 72. ● If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to "OFF", then to "P". ● The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. (੬ pg. 22) ● You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camcorder body.