JVC GY-HM200U Instruction Manual

JVC GY-HM200U Manual

Get JVC GY-HM200U PDF manuals and user guides View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals

JVC GY-HM200U manual content summary:

  • JVC GY-HM200U | Instruction Manual - Page 1
    . 4K MEMORY CARD CAMERA RECORDER GY-HM200U/GY-HM200E GY-HM170U/GY-HM170E INSTRUCTIONS . The illustration here shows how the handle unit is attached using the unit supplied with GY-HM200U/GY-HM200E. GY-HM170U/GY-HM170E do not come with a handle unit. The specifications and appearance of this product
  • JVC GY-HM200U | Instruction Manual - Page 2
    2
  • JVC GY-HM200U | Instruction Manual - Page 3
    IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • JVC GY-HM200U | Instruction Manual - Page 4
    the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. . This device complies may cause undesired operation. Changes or modifications not approved by JVC could void the user's authority to operate the equipment. This
  • JVC GY-HM200U | Instruction Manual - Page 5
    A REGLER PAR L'UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME. Le symbole de l'éclair à l'intérieur d'un triangle équilatéral est importantes au sujet desquelles des renseignements se trouvent dans le manuel d'instructions. Ces symboles ne sont utilisés qu'aux Etats-Unis. CAUTION:
  • JVC GY-HM200U | Instruction Manual - Page 6
    be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly. When using the AC adapter in
  • JVC GY-HM200U | Instruction Manual - Page 7
    product is not supplied fitted with a mains plug then follow the instructions given below: DO NOT make any connection to the Larger Terminal coded To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel. When you are not using the AC
  • JVC GY-HM200U | Instruction Manual - Page 8
    with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel Germany Sehr geehrter Kunde, sehr geehrte Kundin
  • JVC GY-HM200U | Instruction Manual - Page 9
    cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life. ... keep a 30% battery level if the battery pack is not to be Pressione botão e puxe a bateria para fora. GY-HM200U/GY-HM200E Empurre GY-HM170U/GY-HM170E Empurre . Safety Precautions 9
  • JVC GY-HM200U | Instruction Manual - Page 10
    and User's Bit 68 Setting Time Code Generator 69 Setting the User's Bit 71 Setting Zebra Pattern 72 Viewing Recorded Videos Immediately (Clip Review 73 Recording Simultaneously at Two Different Definitions 74 Series Rec 74 Dual Rec 74 Backup Rec 76 Special Recording 78 Pre Rec 78 Clip
  • JVC GY-HM200U | Instruction Manual - Page 11
    and Actions 170 List of FTP Transfer Errors K 171 List of Live Streaming Error Displays K . 173 Blinking of the Tally Lamp 174 Warning Tone 174 Troubleshooting 174 Specifications 176 Index 180 Software License Agreement 182 Important Notice concerning the Software ..... 183 . Contents 11
  • JVC GY-HM200U | Instruction Manual - Page 12
    /GY-HM200E, it is also possible to perform streaming while the recording is ongoing. Equipped with progressive-compatible 3G-SDI and HDMI output [SDI OUT] and [HDMI] terminals are equipped for digital output. 3G-compatible SDI output is supported, and external output including 4K from the [HDMI
  • JVC GY-HM200U | Instruction Manual - Page 13
    reference items. K : Feature available on GY-HM200U/GY-HM200E only. M : Feature available on GY-HM170U/GY-HM170E only. O : Function that operates only when the handle unit is attached. Content of this manual 0 All rights reserved by JVC KENWOOD Corporation. Unauthorized duplication or reprinting
  • JVC GY-HM200U | Instruction Manual - Page 14
    battery with the battery cap attached in a dry place between 15 °C and 25 °C (59 °F and 77 °F). oK 0 For details, refer to the instruction manual of the battery. o ATTENTION: The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for
  • JVC GY-HM200U | Instruction Manual - Page 15
    Required" will be displayed every time you turn on the power. SDHC/SDXC Cards o SDHC/SDXC card is referred to as SD card in this manual. o This camera recorder saves the recorded images and audio sound on the SD card (sold separately) in the card slot. o If the SD card contains
  • JVC GY-HM200U | Instruction Manual - Page 16
    Introduction Others o Do not insert objects other than the memory card into the card slot. o Do not block the vent on the unit. Blocking of the vent causes internal heating and may lead to burns and fires. 0 Do not turn off the [POWER ON/OFF] switch or remove the power cable during recording or
  • JVC GY-HM200U | Instruction Manual - Page 17
    Introduction Copyright o Any recordings made on this camera recorder that are played back for profit or public preview may infringe on the rights of the owner of the recordings. Do not use the recordings for purpose other than personal enjoyment without prior consent from the owner. License Notices
  • JVC GY-HM200U | Instruction Manual - Page 18
    Class) Upon access via a web browser and selecting [Change] on the [Change to Remote Edit Mode?] screen on the camera or the web browser GY-HM200U/ GY-HM200E only Remote Edit Mode * * Selecting a mode other than the Metadata Edit mode via the web browser, or selecting [Exit] on the [Remote Edit
  • JVC GY-HM200U | Instruction Manual - Page 19
    of SD card is not possible in Camera mode. However, you can check the most recently recorded video clip. (A P73 [Viewing Recorded Videos Immediately (Clip Review)] ) Media Mode USB Mode 0 This mode allows you to play back or delete clips recorded on the SD card. 0 When a playable SD card is
  • JVC GY-HM200U | Instruction Manual - Page 20
    Introduction Names of Parts B K L J A C I M D E H F . A Built-in Microphone (A P65 [Audio Recording] ) B Handle Unit K (A P24 [Handle Unit K] ) * GY-HM170U/GY-HM170E does not come with the handle unit. For details on purchasing the handle unit, please contact the local dealers in your
  • JVC GY-HM200U | Instruction Manual - Page 21
    Adjustment (AE) Mode] ) H [SHUTTER] Shutter Speed Button For switching the shutter speed in the Manual Shutter mode. Press and hold the button to switch between Automatic Shutter mode and Manual Shutter mode. (A P58 [Setting the Electronic Shutter] ) I [AE LEVEL] Automatic Brightness Adjustment (AE
  • JVC GY-HM200U | Instruction Manual - Page 22
    Monitor] ) D [SDI OUT] SDI Output Terminal K (A P109 [ SDI Rec Trigger K ] ) (A P138 [Connecting External Monitor] ) Rear Terminal GY-HM200U/GY-HM200E B C A C A D H G FE . A [BATTERY] Terminal B [BATT. RELEASE] Battery Lock Release Button (A P30 [Removing the Battery] ) C [REC] Record Trigger
  • JVC GY-HM200U | Instruction Manual - Page 23
    can also use it as a user button by assigning a specific feature in the menu setting to this button. (A P39 [Assignment of Functions to User Buttons] ) F [C.REVIEW/4] Clip Review/User 4 Button 0 For checking the most recently captured images. (A P73 [Viewing Recorded Videos Immediately (Clip
  • JVC GY-HM200U | Instruction Manual - Page 24
    ] Audio Input Signal Selection Switch (A P65 [Audio Recording] ) O [INPUT2] Audio Input Signal Selection Switch (A P65 [Audio Recording] ) P [CH2 AUTO/MANUAL] CH2 Audio Recording Mode Switch (A P66 [Adjusting the Audio Recording Level O] ) Q [CH2] CH2 Recording Level Adjustment Knob (A P65 [Audio
  • JVC GY-HM200U | Instruction Manual - Page 25
    Introduction Lens Section A BC D . A Filter Built-In Screw 0 Transparent or UV filter for lens protection, or filters for various effects can be installed. 0 Installable filter types: Φ62 mm P0.75 Memo : 0 Remove the lens hood when installing the filter. (A P28 [Attaching/Detaching the Hood] ) B
  • JVC GY-HM200U | Instruction Manual - Page 26
    Handle Unit Battery [x] [AUX] K : SSL-JVC50 Battery Chager K : IDX Battery Charger M : AA-VF8 AC Adapter M : BN-VF823 [DC] [SDI OUT] GY-HM200U/GY-HM200E only SDI Cable BNC [HDMI] HDMI Cable Standard Package [AV] AV Cable Monitor RCA pin Carrying Case [HOST] [REMOTE] [DEVICE
  • JVC GY-HM200U | Instruction Manual - Page 27
    of the grip belt accordingly. . Attaching the Handle Unit K The handle unit is detached from the camera recorder unit in the factory shipment. * GY-HM170U/GY-HM170E does not come with the handle unit. For details on purchasing the handle unit, please contact the local dealers in your area. To use
  • JVC GY-HM200U | Instruction Manual - Page 28
    Preparations Attaching/Detaching the Lens Cap 0 Before shooting, detach the lens cap. 0 When this camera recorder is not in use, attach the lens cap to protect the lens. 0 Pinch the tabs on both sides of the lens cap to attach and detach the lens cap. Attaching/Detaching the Hood Attaching the
  • JVC GY-HM200U | Instruction Manual - Page 29
    ) Use the screw hole that suits the tripod. To prevent the camera recorder from falling off, which may result in injuries or damages, read the instruction manual of the tripod to be used and make sure that it is securely attached. 2 3 o Bottom . Caution : 0 Use the tripod on a stable surface. 0 To
  • JVC GY-HM200U | Instruction Manual - Page 30
    GY-HM200U/GY-HM200E 2 GY-HM170U/GY to the instruction manual of the battery. o Continuous operating time SSL-JVC50 (accessory) : Approx. 4 hrs 40 mins K (*1) Approx. 5 hrs (*2) BN-VF823 (accessory) : Approx. 2 hrs (*1) M Approx. 2 hrs 20 mins (*2) *1 When [System] is set to "4K
  • JVC GY-HM200U | Instruction Manual - Page 31
    Preparations Using AC Power (DC IN Power) Use the supplied AC adapter to operate the camera recorder with AC power. 1 2 . 1 Connect the DC cable of the AC adapter to the [DC] terminal of the camera recorder. 0 Check that the power switch of the camera recorder is set to "OFF". 0 Open the cover of
  • JVC GY-HM200U | Instruction Manual - Page 32
    Menu Screen (A P93 [Display and Description of the Menu Screen] ) Display Settings 0 If the battery is not fully charged, the battery will be charged at the same time. 0 Even when a fully charged battery is used, charge the battery briefly to confirm the remaining battery power. (A P29 [Power
  • JVC GY-HM200U | Instruction Manual - Page 33
    Initial Settings When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built-in clock in the [Initial Setting] screen. All operations are disabled until initial settings are complete. Memo : 0 The
  • JVC GY-HM200U | Instruction Manual - Page 34
    Preparations 4 Press the Set button (R) after confirming the exit screen. The [Initial Setting] screen appears. 0 For U models Initial Setting UTC-05:00 Set . 0 For E models Initial Setting UTC Set . Memo : 0 The [Initial Setting] screen appears when the power is turned on for the first time and
  • JVC GY-HM200U | Instruction Manual - Page 35
    Preparations Displays on the LCD Monitor and Viewfinder You can display the camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screen during shooting. Memo : 0 When [Main Menu] B [A/V Set] B [Video Set] B [Display On TV] is set
  • JVC GY-HM200U | Instruction Manual - Page 36
    Focus Assist USER2 TC Preset USER3 USER4 Lolux Clip Review USER5 Zebra USER6 OIS USER7 Rec Audio -62dB Video F1. 6 Pɹ15000K 1/ 100 . * These are screen examples of GY-HM200U/GYHM200E. The contents displayed are different depending on the model and settings. 36 Displays on the
  • JVC GY-HM200U | Instruction Manual - Page 37
    Preparations Adjusting the LCD Monitor and Viewfinder You can monitor video images on this camera recorder using the viewfinder, LCD monitor, or both. Adjusting the LCD Monitor 2 Tilt 180 degrees upward Tilt 90 degrees downward Inverted LCD Normal LCD . Displays on the LCD Monitor and
  • JVC GY-HM200U | Instruction Manual - Page 38
    Preparations Adjusting the Viewfinder You can change the brightness and peaking of the viewfinder screen according to your usage conditions. Changing the brightness of the screen will not affect the recorded images. 1 2 3 . Caution : 0 A high-definition viewfinder is used on this camera recorder
  • JVC GY-HM200U | Instruction Manual - Page 39
    menu items corresponding to each button. Button [F.ASSIST/1] Button Menu Item [USER1] [TC/2] Button [USER2] [LOLUX/3] Button [USER3] [C.REVIEW/4] Button [USER4] [ZEBRA/5] Button [USER5] [OIS/6] Button [USER6] [REC/7] Button [USER7] [EXPANDED FOCUS/8] Button [USER8] [AWB/9] Button LCD
  • JVC GY-HM200U | Instruction Manual - Page 40
    Recordable Time of SD Cards The estimated recordable time is only a guide. Differences may occur depending on the SD card in use and the B [Record Set] B [Record Format] B [Format] is set to "QuickTime" System 4K HD Resolution 2160p 1080i/1080p Bit Rate 4GB 8GB 16GB 32GB 64GB (SDXC) 128GB (SDXC)
  • JVC GY-HM200U | Instruction Manual - Page 41
    Preparations Inserting an SD Card This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback. 1 3 SD Card Cover 2 SD Card . 1 Open the SD card cover by sliding the cover in the direction indicated by the arrow. 2 Insert an SD card with the notched corner
  • JVC GY-HM200U | Instruction Manual - Page 42
    Preparations Switching the SD cards When both card slots are inserted with SD cards, you can use the [SLOT SEL] button to switch the card to use. When the memory on an SD card is full during recording, data recording automatically switches to the other card. 1 Select [System] B [Media] B [Format
  • JVC GY-HM200U | Instruction Manual - Page 43
    Preparations 6 Formatting is complete. When formatting is complete, "Complete" appears and the camera recorder returns to the [Format Media] screen. Memo : 0 During formatting, menu operation is unavailable but you can start recording. However, this is only available when a recordable SD card is
  • JVC GY-HM200U | Instruction Manual - Page 44
    SD Cards Folders in the SD Card The captured image is recorded into different folders according to the [System] and [WFormat]/ [YFormat] settings. System 4K/HD/SD/ Web HD/SD/ Web WFormat/ YFormat QuickTime AVCHD Record Folder DCIM PRIVATE/AVCHD Memo : 0 By formatting (initializing) the SD card
  • JVC GY-HM200U | Instruction Manual - Page 45
    switches. 0 [POWER ON/OFF] switch 0 [INPUT1]/[INPUT2] Audio input signal selection switch O 0 [CH1]/[CH2] Audio input signal selection switch O 0 [CH1 AUTO/MANUAL]/[CH2 AUTO/MANUAL] Audio recording mode switch O 0 Focus ring 0 Zoom lever at the grip/Zoom lever at the handle O/Zoom ring at the lens
  • JVC GY-HM200U | Instruction Manual - Page 46
    and hold the [FULL AUTO] button to switch the Full Auto mode ON and OFF. Memo : 0 To set each individual video setting item automatically or manually, and to carry out the audio input settings and the audio recording level adjustment, refer to the following. 0 [Adjusting the Brightness] (A P 54
  • JVC GY-HM200U | Instruction Manual - Page 47
    ] is assigned to the [C.REVIEW/4] button in factory default. 0 [Clip Review] can also be assigned to other user buttons. (A P39 [Assignment of Functions to User Buttons] ) Selecting System Definition, File Format and Video Format You can select the resolution of the recorded videos (4K, HD, SD, or
  • JVC GY-HM200U | Instruction Manual - Page 48
    QuickTime file format (.MOV) Memo : 0 When [System] is set to "4K", this item is fixed at "QuickTime". Selecting a Video Format 0 Select a can be selected on this camera recorder. o When [System] is set to "4K" Record Format W Format W Resolution W Frame Rate Quick Time 3840x2160 30p 25p 24p
  • JVC GY-HM200U | Instruction Manual - Page 49
    Shooting o When [System] is set to "HD+Web", the options for slot B are: Record Format Y Format Y Resolution Y Frame Rate QuickTime 960 x 540 30p 25p 24p 720 x 480 60i 720 x 576 50i 480x270 30p 25p 24p AVCHD 1440 x 1080 60i 50i 720 x 480 60i 720 x 576 50i Y Bit Rate 3M (HQ) 8M
  • JVC GY-HM200U | Instruction Manual - Page 50
    ] ) One Push Auto Focus If [Push AF/AF Lock] is assigned to the user button, pressing the assigned user button (within 1 minute) while in the Manual Focus mode makes the camera recorder focus on the center of the frame automatically. Memo : 0 Face detection does not work during One Push Auto Focus
  • JVC GY-HM200U | Instruction Manual - Page 51
    Function] ) (A P52 [Expanded Focus Function] ) 0 If [Push AF/AF Lock] is assigned to the user button, pressing the assigned user button while in the Manual Focus mode activates the Onepush Auto Focus mode, and holding down the button activates the Push Auto Focus mode. (A P50 [One Push Auto Focus
  • JVC GY-HM200U | Instruction Manual - Page 52
    Shooting Focus Assist Function 0 When the [F.ASSIST/1] button is pressed during shooting, the focused area is displayed in color. This enables easy and accurate focusing. 0 Select the color (blue, red or green) in the menu. Memo : 0 When [Main Menu] B [LCD/VF] B [Shooting Assist] B [Focus Assist] B
  • JVC GY-HM200U | Instruction Manual - Page 53
    Shooting Adjusting the Focusing by Face Detection This function detects human faces and automatically adjusts focus during Auto Focus. It can also track moving objects. When several faces are detected, you can select one to focus on. Memo : 0 This function can also adjust the brightness
  • JVC GY-HM200U | Instruction Manual - Page 54
    Shooting Selecting Specific Person from Several Persons 1 Hold down the user button that is assigned with "Face Detect". 0 The camera recorder will enter face selection mode and the face detection icon (q) will blink. 0 An orange frame will appear on the face of the person nearest to the center of
  • JVC GY-HM200U | Instruction Manual - Page 55
    , the automatic brightness adjustment (AE) mode is enabled. Adjusting the Brightness Manually Press and hold the [FULL AUTO] button to set to Full Auto mode some or all of the items (Iris, Gain and Shutter Speed) can be manually adjusted. 1 Press and hold the [FULL AUTO] button to set Full Auto mode
  • JVC GY-HM200U | Instruction Manual - Page 56
    is assigned to the user button, pressing the assigned user button while in the Manual Iris mode activates the One-push Auto Iris mode, and holding down the button to the user button, press and hold down this button in the Manual Iris mode to change to the Auto Iris mode temporarily. The iris
  • JVC GY-HM200U | Instruction Manual - Page 57
    . You can set the gain of the video amplifier according to the brightness of the object. Select the setting mode according to your shooting conditions. Manual Gain Mode (Manual Gain Switching) 1 Press and hold the [FULL AUTO] button to set Full Auto mode to off. 0 Select the gain level of the video
  • JVC GY-HM200U | Instruction Manual - Page 58
    Full Auto mode to off. 2 Press and hold the [SHUTTER] button to enter Manual Shutter mode. 0 The shutter speed appears on the screen. 00: 00: 00.00 the [SHUTTER] button is pressed (for less than 1 second) in the Manual Shutter mode to display the shutter speed against a white background, you can set
  • JVC GY-HM200U | Instruction Manual - Page 59
    Shooting Frame Rate Shutter Mode 60p 50p 60i 50i 24p 30p 25p J 1/10000 ^ ^ 1/4000 1/10000 1/10000 1/2000 1/4000 1/4000 1/1000 1/2000 1/2000 1/500 1/1000 1/1000 1/250 Step 1/500 1/500 1/120 1/250 1/250 1/100 1/120 1/120 1/60 1/100 1/100 1/50 (Standard) 1/60 1/50 1/48 1/
  • JVC GY-HM200U | Instruction Manual - Page 60
    Shooting ND Filter Warning Display In order to adjust the amount of light when you are shooting at a relatively bright location, the diameter of the iris may become extremely small, causing blurry effects to occur as a result. This phenomenon is known as "small aperture diffraction". You can make
  • JVC GY-HM200U | Instruction Manual - Page 61
    screen appears. White Balance 3 Press the Set button (R). Returns to the [White Balance] screen. White Balance FAW Paint R Value B Value . Manual White Balance Mode (Manual Switching) 1 Press and hold the [FULL AUTO] button to set Full Auto mode to off. 0 Use the [WHT.BAL B/A/PRST] switch to
  • JVC GY-HM200U | Instruction Manual - Page 62
    Shooting Setting the [Preset Temp.] or [Alternative Temp.] Values You can change both the color temperature settings in the Preset mode in the menu. 1 Open the [Preset Temp.] or [Alternative Temp.] menu. 0 Select [Main Menu] B [Camera Process] B [White Balance] B [Preset Temp.] and [Alternative
  • JVC GY-HM200U | Instruction Manual - Page 63
    Shooting 282min 100min 50min 00: 00: 00.00 Jan 24 , 2015 12 :34 : 56 3840x2160 30 p 150M 4030 20 10 0 5.6f t ND 1 /16 AE+6 18dB F1. 6 A 1/ 100 [AWB] Activating White Detection Frame Blinking 282min 100min 50min 00: 00: 00.00 Jan 24 ,2015 12 :34 : 56 3840x2160 30p 150M 4030 20 10 0
  • JVC GY-HM200U | Instruction Manual - Page 64
    Shooting Adjusting the Camera Image The picture quality of the camera can be set using the [Camera Process] menu. As the adjustments are shown on the screen, you can adjust the values while checking the picture quality on the camera. 0 [Detail] 0 [Master Black] 0 [Black Toe] 0 [Knee] 0 [White Clip]
  • JVC GY-HM200U | Instruction Manual - Page 65
    Shooting Audio Recording You can record audio from the two channels (CH1/ CH2) in synchronization with video images on this camera recorder. Select from the four options below to record the audio. 0 Built-in Microphone 0 Microphone connected to [AUX] terminal 0 Microphone connected to [INPUT1]
  • JVC GY-HM200U | Instruction Manual - Page 66
    1 /16 AE+6 18dB F1. 6 P 15000K 1/ 100 o When the input channel is set to "INT" for both [CH1] and [CH2] 1 Set the [CH1 AUTO/MANUAL] selection switch to "MANUAL". 2 Turn the [CH1] recording level adjustment knob to adjust the level. When the built-in microphone and the [AUX] input terminal are used
  • JVC GY-HM200U | Instruction Manual - Page 67
    . 0 When [A/V Set] B [Audio Set] B [Audio On FULL AUTO] is set to "SW Set", you can switch the audio recording mode with the [CH1/CH2 AUTO/MANUAL] selection switch on the camera recorder even if the [FULL AUTO] button is set to "ON". (A P112 [ Audio On FULL AUTO ] ) Monitoring Audio Sound During
  • JVC GY-HM200U | Instruction Manual - Page 68
    Shooting Time Code and User's Bit Time code and user's bit data are recorded with the video in this camera recorder. The time code and user's bit are displayed on the viewfinder and LCD monitor during playback or recording. (Display screen) Displaying Time Code and User's Bit The time code and user
  • JVC GY-HM200U | Instruction Manual - Page 69
    Shooting Setting Time Code Generator Presetting the Time Code Time code and user's bit data generated from the internal time code generator are recorded. This section describes how to set [TC/UB] B [TC Preset]. (A P103 [ TC Preset ] ) Memo : 0 When [Main Menu] B [System] B [Record Set] B [Record
  • JVC GY-HM200U | Instruction Manual - Page 70
    [ TC Generator ] ) 2 Press the [TC/2] button. The [TC Preset] setting screen appears. During non-drop During drop frame frame . Memo : 0 Press the [C.REVIEW/4] button to reset each digit to "0". The cursor moves to the time digit (left). 3 Check the values and press the Set button (R). 0 The
  • JVC GY-HM200U | Instruction Manual - Page 71
    close. 0 When editing the time code, operation of the buttons that are set in [Main Menu] B [Camera Function] B [User Switch Set] is disabled. [C.REVIEW/4] functions as the number reset button. (A P98 [User Switch Set Item] ) Recording Time Code in Continuation of the Recorded Time Code on SD Card
  • JVC GY-HM200U | Instruction Manual - Page 72
    increments) [Zebra] 3 Display the zebra pattern. Press the [ZEBRA/5] button to display the zebra pattern in the specified range. . Memo : 0 Press the [C.REVIEW/4] button to reset each digit to "0". The cursor moves to the left. 4 Check the values and press the Set button (R). 0 The user's bit is
  • JVC GY-HM200U | Instruction Manual - Page 73
    does not function while SDI Rec Trigger is in the REC state. K . 1 Press the user button assigned with the "Clip Review" function during standby ("STBY" is displayed). Playback of the configured section starts. Memo : 0 The video clip is played back according to the setting in [Main
  • JVC GY-HM200U | Instruction Manual - Page 74
    will only be recorded to that slot. 0 The [Rec Mode] is fixed at "Normal". 0 Clip Cutter Trig is disabled. 0 [Slot Mode] cannot be selected. 0 Clip Review can only be performed for slot A. ("No Media" appears if there is no card in slot A while a card is inserted into slot B.) 0 Playback of web
  • JVC GY-HM200U | Instruction Manual - Page 75
    : 00:00.00 Jan 24,2015 12 :34 :56 White 5.6f t ND 1 /16 AE+6 18dB F1. 6 Pɹ15000K 1/ 100 Memo : 0 Available when [System] is set to "4K", "HD" or "SD". (A P115 [ System ] ) 0 During recording in the Dual Rec mode, both the card slot marks light up in red. 0 During recording in the
  • JVC GY-HM200U | Instruction Manual - Page 76
    Slot A stops Slot B stops recording recording recording recording Slot A Clip 2 Slot B Clip 1 Clip 2 Clip 3 . Memo : 0 Available when [System] is set to "4K", "HD" or "SD". (A P115 [ System ] ) 0 During the Backup Rec mode (when [Slot Mode] is set to "Backup"), you can control recording to
  • JVC GY-HM200U | Instruction Manual - Page 77
    Shooting 3 Start normal recording (normal recording into slot A) 0 Press any of the [REC] buttons. 0 Recording into the media in slot A starts. (The characters "RREC" appear in red.) 0 The card icon of slot A turns red (unselected state), and the status indicator of slot A blinks in red. Red (not
  • JVC GY-HM200U | Instruction Manual - Page 78
    Menu] B [System] B [Record Set] B [Record Format] B [System]. 0 When [System] is set to "4K": Fixed at "5sec" 0 When [System] is set to "HD" or "SD": "5sec", "10sec" or "15sec [Rec Mode] 0 Immediately after the end of Clip Review 0 Immediately after changing file format 0 Immediately after changing
  • JVC GY-HM200U | Instruction Manual - Page 79
    Shooting Clip Continuous Rec 0 In normal recording, when the recording stops, the image, audio, and accompanying data from the start till the end of the recording are recorded as one "clip" on the SD card. 0 This mode allows you to consolidate several rounds of "startstop recording" into one clip.
  • JVC GY-HM200U | Instruction Manual - Page 80
    "HD+Web" 0 The following operations cannot be performed while recording is paused (STBYC, yellow text). 0 Clip Review operation (A P73 [Viewing Recorded Videos Immediately (Clip Review)] ) 0 Switching SD card slots 0 Switching operation mode (A P18 [Operation Modes] ) 0 Files are split into sizes of
  • JVC GY-HM200U | Instruction Manual - Page 81
    Shooting 2 Set the number of frames to record in [Rec Frames]. 0 Set using [Main Menu] B [System] B [Record Set] B [Rec Mode] B [Rec Frames]. (A P116 [ Rec Frames ] ) 3 Start recording. 0 Press the [REC] button to record only the number of frames specified in [Rec Frames] and pause. 0 The display
  • JVC GY-HM200U | Instruction Manual - Page 82
    a few seconds after the operation is performed. 0 This item cannot be used when [Slot Mode] is set to "Backup". 0 Available when [System] is set to "4K", "HD" or "SD". (A P115 [ System ] ) 0 This item cannot be used when [Rec Mode] is set to a value other than "Normal" or "Pre Rec". (A P116 [ Rec
  • JVC GY-HM200U | Instruction Manual - Page 83
    the clip selected by the cursor. 0 If an OK mark has been appended, it will be deleted. Otherwise, an OK mark will be appended. F [C.REVIEW/4] Button 0 Switches the selection status of the clip selected by the cursor. 0 Clips being selected are displayed with check mark. G [ZEBRA/5] Button Enters
  • JVC GY-HM200U | Instruction Manual - Page 84
    on a camera recorder other than the GY-HM200 and GY-HM170 series. If a file cannot be played back, the above thumbnail substitution display 2 is displayed. E Clip Name The file name (clip number) of the selected clip is displayed. F Operation Guide 0 Displays a guide
  • JVC GY-HM200U | Instruction Manual - Page 85
    Playback K Network Connection Icon K 0 The network connection status is displayed when [Main Menu] B [System] B [Network] is set to "On". This icon is not displayed when "Off" is selected. (A P130 [Network Connection Icon K] ) Detailed screen * Items that are common with the Standard screen will
  • JVC GY-HM200U | Instruction Manual - Page 86
    Playback Item Description FTP Upload Uploads a clip to the FTP server. 0 This Clip: Uploads the clip pointed by the cursor. 0 Selected Clips: Uploads the clips selected (appended with check mark). 0 All Clips: Uploads all clips. Delete Clips Deletes clip. However, clips with OK mark cannot be
  • JVC GY-HM200U | Instruction Manual - Page 87
    Playback Time Code Playback Time code or user's bit recorded on an SD card can be displayed on the LCD monitor and viewfinder. Memo : 0 The time code is also superimposed on the video signal output from the [SDI OUT] terminal. K 0 If a section without time code is played back, the time code will
  • JVC GY-HM200U | Instruction Manual - Page 88
    Playback 3 Select [Delete Clips] B [This Clip] and press the Set button (R). A screen to confirm deletion appears. This Clip 3 Selected Clips All Clips . 4 Select [Delete] using the cross-shaped button (JK), and press the Set button (R). Deleting starts. Appending/Deleting OK Mark 0 You can
  • JVC GY-HM200U | Instruction Manual - Page 89
    1 Move the cursor to a clip without a check mark, and press the [C.REVIEW/4] button. A green check mark appears on the clip. 16.4V 2/4 3840x2160 30p Memo : 0 Selecting clips appended with check mark and pressing the [C.REVIEW/4] button will cancel the selection. 0 If the operation is performed on
  • JVC GY-HM200U | Instruction Manual - Page 90
    [Selected Clips] 0 Deletes selected clips together: [Delete Clips] B [Selected Clips] Memo : 0 Selecting clips appended with check mark and pressing the [C.REVIEW/4] button will cancel the selection. 0 If the operation is performed on multiple clips at the same time, a progress bar appears. You can
  • JVC GY-HM200U | Instruction Manual - Page 91
    33.00 11: 23: 44.00 00 : 08 : 22 A Guide Operation guide B Position bar 6 : Current position of the video 7 : Position ] is set to "4K": 3 minutes or longer; setting other than "4K": 10 minutes or longer Specify the out point by pressing the [C.REVIEW/4] button at the point you want to end
  • JVC GY-HM200U | Instruction Manual - Page 92
    Favorites Menu]. (A P123 [Adding/Editing Frequently Used Menu Items (Favorites Menu)] ) F [C.REVIEW/4] Button Resets settings in the [TC Preset] or [UB Preset] setting screen. This . Simple Help appears only when the selected menu item supports this function. 92 Basic Operations in Menu Screen
  • JVC GY-HM200U | Instruction Manual - Page 93
    that there is a sub-menu to access. C Fixed Item Items that cannot be changed are displayed in gray and cannot be selected. D Operation Guide Guide for the current operation buttons. E Setting Value Setting values for the menu items. For menus with sub-menus, values are not displayed. F Scroll
  • JVC GY-HM200U | Instruction Manual - Page 94
    Menu Display and Detailed Settings Text Input with Software Keyboard Use the software keyboard to enter the [Setup File] subname, [Clip Name Prefix], and the settings under [Network] B [Settings]. Entering a subname (A P136 [Configuring Setup Files] ) A B H C G F D E . Entering the [Clip Name
  • JVC GY-HM200U | Instruction Manual - Page 95
    Menu Display and Detailed Settings Menu Screen Hierarchical Chart - [Color Matrix A P 102) - [Color Gain A P 102) - [Reset Process A P 102) [Main Menu A P 95) - [Camera Function A P 96) - [Bars A P 96) - [OIS A P 96) - [Flicker Correction A P 96) - [Shutter A P 96) - [AE Speed A P 96) -
  • JVC GY-HM200U | Instruction Manual - Page 96
    Menu Display and Detailed Settings Camera Function Menu Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode. Bars For setting whether to output color bars. [Setting Values: On, ROff] Memo : 0 The audio test signals (1 kHz) can be output
  • JVC GY-HM200U | Instruction Manual - Page 97
    [Setting Values: ROff, On] Memo : 0 When [System] is set to "4K", this item is fixed at "Off" and cannot be selected. Handle Zoom Speed L/Handle effective only when the [FOCUS] switch is set to "AUTO". 0 The manual focus adjustment mode is temporarily activated by turning the focus ring in the AF
  • JVC GY-HM200U | Instruction Manual - Page 98
    Values: None, Zebra, Marker, Bars, Focus Assist, OIS, LCD Backlight, Lolux, AE/FAW Lock, Face Detect, OK Mark, Clip Cutter Trig, Backup Trig, Clip Review, Load Picture File, White Balance, TC Preset, AWB, Rec, Preset Zoom1, Preset Zoom2, Preset Zoom3, Push AF/AF Lock, One Push Iris, Expanded Focus
  • JVC GY-HM200U | Instruction Manual - Page 99
    any of the functions that can be locked is operated regardless of the mode (Manual or Auto). Expanded Focus For specifying the operation when any of the [USER1]-[USER9 turns off about 3 seconds after it is turned on. During manual focus, the [Expanded Focus] feature turns off about 3 seconds after
  • JVC GY-HM200U | Instruction Manual - Page 100
    "Off", this item appears as "---" and cannot be selected. 9 Level For setting the starting point (knee point) of knee compression when [Knee] is set to "Manual". [Setting Values: R100.0%,97.5%,95.0%,92.5%, 90.0%,87.5%,85.0%] Memo : 0 When [Knee] is set to other than "Auto", or [WDR] is set to other
  • JVC GY-HM200U | Instruction Manual - Page 101
    an object under a condition where there is drastic change in the light intensity. [Setting Values: RFast, Middle, Slow] Memo : 0 When [Knee] is set to "Manual", or [WDR] is set to other than "Off", this item appears as "---" and cannot be selected. White Clip For setting the point to apply white
  • JVC GY-HM200U | Instruction Manual - Page 102
    Color Matrix For setting the color matrix. 0 Cinema Subdued: Sets to a subdued color matrix that is similar to the screen characteristics of movies. 0 Cinema Vivid: Sets to a vivid color matrix that is similar to the screen characteristics of movies. 0 Standard: Sets to a standard color matrix. [
  • JVC GY-HM200U | Instruction Manual - Page 103
    Menu Display and Detailed Settings AWB Paint For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode. For details, refer to "[Adjusting the White Balance] (A P 60)". 0 Increase the number: Strengthens the red/blue. 0 Decrease the number: Weakens the red/blue. [Setting
  • JVC GY-HM200U | Instruction Manual - Page 104
    Menu Display and Detailed Settings 9 Preset For setting the user's bit. (Digit by digit) Display : AB CD EF 01 (A P71 [Presetting the User's Bit] ) Memo : 0 When [UB Mode] is set to "Date" or "Time", this item appears as "---" and preset is disabled. Drop Frame For setting the framing mode of the
  • JVC GY-HM200U | Instruction Manual - Page 105
    Menu Display and Detailed Settings VF Bright For setting the brightness of the viewfinder screen. Increasing the value increases the brightness. [Setting Values: -10 to +10 (R 0)] VF Contrast For setting the difference in luminance between the darkest and brightness areas in the viewfinder screen.
  • JVC GY-HM200U | Instruction Manual - Page 106
    the angle of view for the image according to the shooting purpose. (A P135 [Marker and Safety Zone Displays (Camera Mode Only)] ) Memo : 0 During Clip Review or when in the Media mode, the markers do not appear regardless of the setting. Marker For setting whether to display marker, safety zone, and
  • JVC GY-HM200U | Instruction Manual - Page 107
    the focal length in meters. 0 Off: Hides the focal length. [Setting Values: Feet, RMeter, Off] WB Indicator When "On" is selected and WB is set manually, the difference in value with the Auto WB (recommended) is displayed as an icon on the screen. (Example) When 3200K is selected
  • JVC GY-HM200U | Instruction Manual - Page 108
    Menu Display and Detailed Settings Memo : 0 The battery mark that appears before the "Time", "Capacity%" or "Voltage" value changes according to the remaining battery power. In addition, the plug mark is added during charging. 4 S : 10 % and below D R : 11 % to 30 % C Q : 31% to 70 % B
  • JVC GY-HM200U | Instruction Manual - Page 109
    Menu Display and Detailed Settings A/V Set Menu Menu screen for video output and audio. Video Set... For specifying video output-related settings. (A P109 [Video Set Item] ) Audio Set... For specifying audio-related settings. (A P110 [Audio Set Item] ) Video Set Item Display On TV For setting
  • JVC GY-HM200U | Instruction Manual - Page 110
    Menu Display and Detailed Settings SD Aspect For setting the style of displaying images with a 16:9 aspect ratio on a 4:3 aspect ratio screen. 0 Letter: Displays as a wide image with the top and bottom blackened. 0 Squeeze: Displays image that is squeezed horizontally. [Setting Values: Letter,
  • JVC GY-HM200U | Instruction Manual - Page 111
    "INPUT1"/"INPUT2" respectively and both the [INPUT1/INPUT2] input signal selection switches are set to the same setting and both the [CH1/CH2 AUTO/ MANUAL] selection switches are set to "AUTO". 0 This item is fixed at "Link" when [CH1 INT] and [CH2 INT] have the following combinations. 0 "AUX L" and
  • JVC GY-HM200U | Instruction Manual - Page 112
    follows the settings below. 0 When the handle unit is connected: Follows the [CH1 AUTO/MANUAL]/[CH2 AUTO/ MANUAL] selection switch setting. 0 When the handle unit is not connected: Follows the MENU setting (AUTO/MANUAL in the audio level setting). 0 Auto: Sets audio recording mode to the forced auto
  • JVC GY-HM200U | Instruction Manual - Page 113
    : 0 This item appears only when the SD card needs to be restored. However, it is not selectable when recording in Camera mode and during Clip Review. Setup File This allows you to save the menu settings as well as the performance results of shutter speed and AWB. It is useful to
  • JVC GY-HM200U | Instruction Manual - Page 114
    Zone ] ) 0 This item is not selectable when recording in Camera mode, during Clip Review, during live streaming K and in Media mode. Date/Time For setting the year, Style ] ) System Information 9 Version Displays information on the firmware version. Display example : 0000-0000 9 Fan Hour For
  • JVC GY-HM200U | Instruction Manual - Page 115
    recorded to the SD card in slot A. The available options vary according to the settings for [System], [WResolution], and [WFormat]. 0 When [System] is set to "4K": Fixed at "150M". 0 When [System] is set to "HD" or "HD+Web", and [WFormat] is set to "QuickTime": [Setting Values: 50M(YUV422), 50M(XHQ
  • JVC GY-HM200U | Instruction Manual - Page 116
    ", "50i", "30p" or "25p". Memo : 0 When [System] is set to "4K", "HD", or "SD", this item is fixed at the same setting as [WFrame Rate]. Menu] B [System] B [Record Set] B [Record Format] B [System] is set to "4K", this item is fixed at "5sec". 9 Rec Frames For setting the number of frames to record
  • JVC GY-HM200U | Instruction Manual - Page 117
    display style can be changed in [LCD/VF] B [Display Settings] B [Date Style]/ [Time Style]. (A P108 [ Date Style ] ) (A P108 [ Time Style ] ) 0 When [System] is set to "4K", this item is fixed at "Off". System Menu 117
  • JVC GY-HM200U | Instruction Manual - Page 118
    8 characters using the software keyboard. (Default value: HM200) 9 Login Name (Fixed) The login name is "jvc". It cannot be changed. 9 Login Password Changes the in the following cases. 0 When [Record Format] B [System] is set to "4K" or "HD+Web" 0 When [Record Format] B [Frame Rate] is set to "
  • JVC GY-HM200U | Instruction Manual - Page 119
    Menu Display and Detailed Settings 9 Live Streaming Starts live distribution when "On" is selected. [Setting Values: On, ROff] Memo : 0 "On" cannot be selected if network connection is not established. 0 "On" cannot be selected when FTP is running. 0 Live streaming switches to "Off" when the power
  • JVC GY-HM200U | Instruction Manual - Page 120
    Menu Display and Detailed Settings 9 Resolution For setting the resolution of the video image during live distribution. The available options vary according to the settings for [WResolution] and [WFrame Rate] under [Record Format]. W Resolution W Frame Rate 1920x1080 60p, 30p 50p, 25p 60i 50i
  • JVC GY-HM200U | Instruction Manual - Page 121
    the settings specified on the [Wizard] screen. 9 Wizard A [Wizard] appears according to the adapter connected to the [HOST] terminal. Follow the instructions. 9 Load Loads the settings on the [Wizard] screen. (A P166 [Reading the Connection Settings File] ) 9 Store Saves the settings on the [Wizard
  • JVC GY-HM200U | Instruction Manual - Page 122
    Menu Display and Detailed Settings Clip Server For setting the server and directory for uploading recorded clips in the SD card to the FTP server. 9 Clip-FTP1 to Clip-FTP4 (The name specified in the respective [Alias] items is displayed) o Alias For setting a name to distinguish the settings of
  • JVC GY-HM200U | Instruction Manual - Page 123
    Focus Meter 2 . Memo : 0 Adding items to [Favorites Menu] cannot be performed in the following cases. [USER3 Add] is displayed in gray in the operation guide. 0 Selected item is already added to [Favorites Menu]. 0 Number of menu items that can be added (20 items) is exceeded. 3 Press the [LOLUX
  • JVC GY-HM200U | Instruction Manual - Page 124
    or crossed-shaped button (I). The header turns magenta and the editing mode is activated. Favorites Menu Edit Favorites Aspect Marker . Memo : 0 When the [C.REVIEW/4] button is pressed again while the menu item with the delete mark (b) is selected, the menu item will be excluded from the items to
  • JVC GY-HM200U | Instruction Manual - Page 125
    Menu Display and Detailed Settings Changing the Order of Items in [Favorites Menu] 3 Select the menu or submenu item to move and press the Set button (R). The moving mode is activated and a position selection bar for the move appears. Edit Favorites ND Filter 3 . 1 Open the [Favorites Menu]
  • JVC GY-HM200U | Instruction Manual - Page 126
    6 Press the [LOLUX/3] button. The option menu to exit the [Favorites Menu] editing mode appears. 7 Select [Save & Exit] and press the Set button (R). Edit Favorites Save & Exit 7 Exit without Saving Cancel . Memo : 0 Moving is not complete until the changes are saved with [Save & Exit]. 0 To
  • JVC GY-HM200U | Instruction Manual - Page 127
    : 0 When an SD card lower than UHS-I U3 is inserted while in the 4K mode. 0 When Record Set is set to other than "AVCHD"/"SD"/"Web" with a ). 0 When attempting to record more than 4 GB while a media that does not support recording of more than 4 GB is inserted. (A P117 [ 4GB File Spanning(SDXC
  • JVC GY-HM200U | Instruction Manual - Page 128
    to "Off". (A P107 [ Record Format ] ) F Audio Level Meter 0 Displays the audio levels of CH1 and CH2. 0 The V icon appears on the screen when in Manual mode. 4030 20 10 0 . 0 When [Main Menu] B [System] B [Record Set] B [Rec Mode] is set to "Frame Rec" or "Interval Rec", audio cannot be recorded
  • JVC GY-HM200U | Instruction Manual - Page 129
    when there is a change. M Iris F-Number Displays F-number of the lens iris. (A P55 [Adjusting the Iris] ) N Gain 0 Displays the gain value when in the Manual Gain mode. 0 The gain value is not displayed in the "AGC" mode. 0 "LUX30" or "LUX36" is displayed when in the low-light shooting mode. Memo
  • JVC GY-HM200U | Instruction Manual - Page 130
    is . detected (No display) When an incompatible USB adapter is detected, or when [Network] is set to "Off" Memo : 0 When a cellular adapter that supports LTE connection display is in use, "LTE" will appear to the left of the above icon when LTE connection is detected. V Time Code (I)/User's Bit
  • JVC GY-HM200U | Instruction Manual - Page 131
    Actions] ) Y Media Status ---- : No card found in the selected slot STBY RREC : Recording standby : Recording REVIEW : Clip Review (A P73 [Viewing Recorded Videos Immediately (Clip Review)] ) STBY P : Pre Rec recording standby (A P78 [Pre Rec] ) RRECP : Pre Rec recording (A P78 [Pre Rec
  • JVC GY-HM200U | Instruction Manual - Page 132
    warnings only. C Resolution Displays the video image resolution. D Frame Rate/Bit Rate Displays the frame rate and bit rate in pairs. E Operation Guide Displays a guide for the current operation buttons. F Audio Level Meter Displays the audio levels of CH1 and CH2. 4030 20 10 0 . Memo : 0 This item
  • JVC GY-HM200U | Instruction Manual - Page 133
    I Information Display The camera information display turns on and off each time you press the [OIS/6] button. 0 Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded. 0dB F1. 6 1/ 100 P 13000K Camera Information Display . Memo : 0
  • JVC GY-HM200U | Instruction Manual - Page 134
    K For checking the network-related settings. (A P121 [ Wizard ] ) USER1 USER2 USER3 USER4 USER5 USER6 USER7 . USER Switch Set Focus Assist TC Preset Lolux Clip Review Zebra OIS Rec Audio Screen For checking settings related to audio level and audio. (A P110 [Audio Set Item] ) Network Type SSID
  • JVC GY-HM200U | Instruction Manual - Page 135
    Marker and Safety Zone Displays (Camera Mode Only) The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting purpose. The marker is displayed only in the Camera mode. Displaying the Grid Marker 1 Set [LCD/VF] B [Marker Settings]
  • JVC GY-HM200U | Instruction Manual - Page 136
    loaded using GY-HM170, the functions that only exist on GY-HM200 are ignored. o Picture file Only picture files of the GY-HM200 and GYHM170 (Displayed in gray, selection disabled) 0 When the inserted SD card is not supported or not formatted. (File name appears as "---".) 0 When a write-protected
  • JVC GY-HM200U | Instruction Manual - Page 137
    6 Select [Store] and press the Set button (R). 5 6 . 7 Save the file. 0 A confirmation screen appears when you choose to overwrite. Select [Overwrite] on the confirmation screen, and press the Set button (R). Saving starts, and "Storing..." appears on the screen. Loading a Setup File 1 Display the
  • JVC GY-HM200U | Instruction Manual - Page 138
    monitor to be connected. (A P109 [ HDMI/SDI Out K ] ) (A P109 [ HDMI Out M ] ) Audio (Lch) Video GND Audio (Rch) AV input HDMI SDI IN GY-HM200U/ GY-HM200E only . * Select the output signal in [A/V Set] B [HDMI/SDI Out]. (A P109 [ HDMI/SDI Out K ] ) * When [Record Format] B [System] is set to
  • JVC GY-HM200U | Instruction Manual - Page 139
    Connecting via SDI K 0 Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the 3G-SDI/HD-SDI and SD-SDI signals. Memo : 0 The sampling frequency for embedded (superimposed) audio signals is 48 kHz. Time code of the built-in time
  • JVC GY-HM200U | Instruction Manual - Page 140
    Connecting Wired Remote Control You can operate the functions of this unit with a wired remote control. Memo : 0 When the switches of the camera recorder and remote control unit are operated at the same time, the switch operation of the remote control unit takes priority over that of the camera
  • JVC GY-HM200U | Instruction Manual - Page 141
    recorder to Camera mode. Memo : 0 The procedure for disabling the USB connection varies according to the PC in use. For details, refer to the instruction manual of the PC. When your PC cannot recognize the SD card Confirm and update the OS of your PC. OS Description Windows Vista Necessary to
  • JVC GY-HM200U | Instruction Manual - Page 142
    remotely control the camera. (A P161 [Camera Control Function K] ) Live streaming By combining with the decoder or PC application that supports live streaming, you can perform audio and video streaming via the network. (A P167 [Performing Live Streaming K] ) Preparing Network Connection K Operating
  • JVC GY-HM200U | Instruction Manual - Page 143
    wizard screen appears according to the type of adapter connected. Follow the instructions on the screen to perform setting. (A P143 [Connecting via Wireless LAN of encryption, Passphrase, and IP Address setting ("DHCP" or "Manual") in cases other than WPS Select Connection Type P2P Connect with
  • JVC GY-HM200U | Instruction Manual - Page 144
    [Select Connection Type] screen. Select "P2P". Follow the screen instructions to complete setting. Perform setting for the following. 0 Mode of * SSID and Passphrase in cases other than WPS Network Type P2P SSID HM200 Security Type WPA2 Passphrase IP Address MAC Address . 4 Select [SSID
  • JVC GY-HM200U | Instruction Manual - Page 145
    instructions to complete setting. Perform setting for the following. 0 IP address setting (DHCP or manual in the case of pay-per-use contracts. Fixed price contract is recommended if you are using the network may result in expensive bills from the phone service provider. Make sure that the setting is
  • JVC GY-HM200U | Instruction Manual - Page 146
    Importing Metadata K You can download a metadata settings file (XML format) from the FTP server and store metadata in the camera recorder. The imported metadata is applied to clips to be recorded. Preparing Metadata 0 You can record the four metadata types below. Title1 : ASCII only, max. 63
  • JVC GY-HM200U | Instruction Manual - Page 147
    Importing Metadata Download the metadata settings file (XML format) from the FTP server. 1 Select [Main Menu] B [System] B [Network] B [Import Metadata] and press the Set button (R). The [Import Metadata] screen appears. 3 Select [Import] on the confirmation screen, and press the Set button (R).
  • JVC GY-HM200U | Instruction Manual - Page 148
    Uploading a Recorded Video Clip K Upload clips recorded in the SD card to a preset FTP server. Configuring the FTP Server for Uploading For specifying the settings for connecting to the FTP server to upload recorded clips to (domain name, user name, password, etc.) as well as the directory of the
  • JVC GY-HM200U | Instruction Manual - Page 149
    5 Upload is complete. 0 After upload is complete, "Successfully Completed." appears on the screen. 0 Press the Set button (R) to return to the thumbnail screen. FTP Upload Successfully Completed. Exit 5 . Selecting and Uploading Multiple Clips To select and upload multiple clips, refer to "[
  • JVC GY-HM200U | Instruction Manual - Page 150
    the status screen. Press the cross-shaped button (HI) to display the [Network] screen. 0 Check the displayed [IP Address]. Network Type SSID P2P HM200 Security Type Passphrase WPA2 IP Address 192.168.0.1 MAC Address . 2 Start up the web browser on the terminal you wish to connect to the
  • JVC GY-HM200U | Instruction Manual - Page 151
    3 Enter the user name and password. Enter the user name (jvc) and the password (initial password: 0000) on the login screen to display the main page of the camera. Editing Metadata K You can create the metadata
  • JVC GY-HM200U | Instruction Manual - Page 152
    3 Editing Metadata A Enter information for the necessary fields. B After input is complete, tap (click) [Save] to overwrite the metadata. B A Done Clip Metadata You can access the page for editing the metadata via a web browser on devices such as a smartphone, tablet terminal, or PC, and display or
  • JVC GY-HM200U | Instruction Manual - Page 153
    o Switching from a web browser A You will see a message indicating "It is necessary to change the camera mode to "Remote Edit Mode". Change the mode." on the web browser. It is necessary to change the camera A mode to "Remote Edit Mode". Change the mode. Cancel Change B . B Tap (click) [
  • JVC GY-HM200U | Instruction Manual - Page 154
    6 Editing the Metadata of Selected Clips A Edit the information for the necessary fields. 0 If you are using a PC, input using the mouse and keyboard. 0 If you are using a smartphone or tablet terminal, tap the text input area to display a standard software keyboard on the screen. Enter the
  • JVC GY-HM200U | Instruction Manual - Page 155
    Uploading a Recording Clip via a Web Browser K 0 Upload clips recorded in the SD card to a preset FTP server. 0 You can upload selected clips, all clips, or those appended with an OK mark. Configuring the FTP Server for Uploading (A P148 [Configuring the FTP Server for Uploading] ) Uploading Video
  • JVC GY-HM200U | Instruction Manual - Page 156
    Memo : 0 When the menu or status is displayed, display of the confirmation screen will be put on hold. 0 If the menu is displayed on the camera recorder, close the menu. 0 If the status is displayed on the camera recorder, close the status display. 0 Pressing the Set button (R) on the camera
  • JVC GY-HM200U | Instruction Manual - Page 157
    8 Select the clip server and start uploading. 0 Upon selecting the server to upoload clips to, an upload screen appears. 8 . 0 The status of the transfer process is indicated by a progress bar. . Memo : 0 To stop transfer, tap (click) the [Stop] button. Tapping (clicking) [Yes] on the confirmation
  • JVC GY-HM200U | Instruction Manual - Page 158
    PC. (A P150 [Connecting from a Web Browser K] ) 2 Tap (click) the [View Remote] tab to open the [View Remote] screen. 2 Connecting to the Network K . Operating Procedure A HM200 B C D 26min 50min STBY 282min E F 01:12:54.19 Z 0 I H G J . 158 Uploading a Recording Clip via a Web Browser K
  • JVC GY-HM200U | Instruction Manual - Page 159
    can register any 3 zoom positions. 1 Set to the Register Preset Zoom mode. Tap (click) the [Preset] button to switch to the Register Preset Zoom mode. HM200 01:12:54.19 Z 0 26min 50min STBY 282min . 2 Determine the zoom position. Use the zoom control to operate the zoom and determine a position
  • JVC GY-HM200U | Instruction Manual - Page 160
    out. 0 The corresponding zoom position mark on the sliding bar also disappears. HM200 01:12:54.19 Z 0 26min 50min STBY 282min Grayed out Position mark the Delete Preset Zoom mode. Memo : 0 The Clip Review function of the camera recorder is unavailable during View Remote operation.
  • JVC GY-HM200U | Instruction Manual - Page 161
    Camera Control Function K You can control the camera by accessing via a web browser on devices such as a smartphone, tablet terminal, or PC. You can perform the following operations for each of the items. A B C D E F . A REC For performing recording start or recording pause operation. . B CAMERA
  • JVC GY-HM200U | Instruction Manual - Page 162
    D FOCUS Enables focusing operations. Configuring Settings via a Browser K . E USER SWITCH You can enable or disable the user buttons that are assigned with a function. You can change the network-related settings by accessing via a web browser on devices such as a smartphone, tablet terminal, or
  • JVC GY-HM200U | Instruction Manual - Page 163
    A View Remote Settings for operations on the View Remote. B Connection Setup Settings related to the network. You can change the settings for each of the preset items on the [Wizard] screen of the camera recorder. C Metadata Server Settings on the server for importing the metadata. Setting can be
  • JVC GY-HM200U | Instruction Manual - Page 164
    Changing Connection Setup You can change the settings for each of the preset items on the [Wizard] screen of the camera recorder. 0 If all the items cannot be displayed in a single page, scroll down to display the remaining items. 0 Items that cannot be changed are grayed out according to the type
  • JVC GY-HM200U | Instruction Manual - Page 165
    Changing Metadata Server Settings You can make direct changes to the FTP server for importing the metadata set in [Main Menu] B [System] B [Network]/[Settings] B [Metadata Server], as well as the path of the file to import. (A P121 [ Metadata Server ] ) Changing Clip Server Settings You can make
  • JVC GY-HM200U | Instruction Manual - Page 166
    5 Select [Store] and press the Set button (R). 4 5 . 6 Save the file. 0 A confirmation screen appears when you choose to overwrite. Select [Overwrite] on the confirmation screen, and press the Set button (R). Saving starts, and "Storing..." appears on the screen. Overwrite Connection Setup? CAM3
  • JVC GY-HM200U | Instruction Manual - Page 167
    on the screen. Performing Live Streaming K By combining with the decoder or PC application that supports live streaming, you can perform audio and video streaming via the network. Supported Formats Video H.264 0 1920x1080 / 60i (12.0 Mbps), 60i (8.0 Mbps), 60i (5.0 Mbps), 60i (3.0 Mbps), 50i (12
  • JVC GY-HM200U | Instruction Manual - Page 168
    to [Combinations of [Record Format] and [Live Streaming Set] that Support Transmission] (A P 168). Memo : 0 Live streaming cannot be performed 0 [Main Menu] B [System] B [Record Set] B [Record Format] B [System] set to "4K" or "HD+Web". 0 [Main Menu] B [System] B [Record Set] B [Record Format] B
  • JVC GY-HM200U | Instruction Manual - Page 169
    required. For details on the settings, please refer to the instruction manual of the router in use. 0 The following parameters are Network Type SSID P2P HM200 Security Type WPA2 Passphrase IP Address MAC Address 192.168.0.1 Live Streaming Multicast Is Not Supported. Cause of Error .
  • JVC GY-HM200U | Instruction Manual - Page 170
    Error Messages and Actions Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as follows according to the error status. Memo : 0 This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from
  • JVC GY-HM200U | Instruction Manual - Page 171
    video format of the file for Set [WResolution], [WFrame Rate] Clip Review is different from the and [WBit Rate] correctly. current [WResolution], clips card for Clip Review. that can be reviewed. (A P40 [SD Card] ) (A P73 [Viewing Recorded Videos Immediately (Clip Review)] ) [REC] button
  • JVC GY-HM200U | Instruction Manual - Page 172
    Error message Status Action Access Denied. Access is denied. Adjust the Server and Port settings for [Metadata Server] or [Clip Server]. (A P121 [ Metadata Server ] ) (A P122 [ Clip Server ] ) Invalid Username or Password. Authentication for login to the FTP server failed. Adjust the
  • JVC GY-HM200U | Instruction Manual - Page 173
    into the IP address. Action 0 Enter the IP address, host name or URL of the destination correctly. (A P168 [Setting Distribution] ) Multicast Is Not Supported. An IP multicast address was set. Cannot Connect to Receiver. Establishment of connection with TCP failed. Use an IP address that is not
  • JVC GY-HM200U | Instruction Manual - Page 174
    whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio Set] B [Alarm Level]. (A P112 [ Alarm Level ] ) Troubleshooting Symptom Action Power does not turn on. 0 Is the AC adapter properly connected? 0 Is the battery charged? 0 Is the power turned on immediately
  • JVC GY-HM200U | Instruction Manual - Page 175
    Symptom Action The [CH1/CH2] recording level 0 Is the [CH1/CH2 AUTO/MANUAL] switch set to "AUTO"? adjustment knob does not 0 Is Full Auto enabled? work. O Is [A/V Set] B [Audio be possible with the encoding bit rate specified. Please reduce the encoding bit rate. Others Troubleshooting 175
  • JVC GY-HM200U | Instruction Manual - Page 176
    including handle unit) M 0 149 mm × 112 mm × 307 mm *1 When [System] is set to "4K" and all other settings are in factory default *2 When [System] is set to "HD" and all other settings (960 x 540 x 3) Storage Section Item Supported media Slots Description SDHC/SDXC x 2 Others 176 Specifications
  • JVC GY-HM200U | Instruction Manual - Page 177
    25 minutes (8 GB SD card, 35 Mbps, VBR mode) 4K mode Recording file QuickTime File Format format Video MPEG-4 AVC/H.264 25p) Audio AAC 32 k 0.2 Mbps Accessories Accessories Warranty Card (U model only) 1 INSTRUCTIONS (BASIC) 1 Document Disc 1 AC Adapter 1 Power Cord (U model: 1, E
  • JVC GY-HM200U | Instruction Manual - Page 178
    134 Dimensional Outline Drawing (Unit: mm) GY-HM200U/GY-HM200E . 90 59 149 307 40 207 191 52.5 62 (HOOD) 197 245 Others 178 Specifications
  • JVC GY-HM200U | Instruction Manual - Page 179
    134 GY-HM170U/GY-HM170E . 90 59 149 307 112 52.5 62 (HOOD) 197 245 * The specifications and appearance of this product are subject to changes for further improvement without prior notice. Others Specifications 179
  • JVC GY-HM200U | Instruction Manual - Page 180
    19, 35, 127 Cellular adapter 145 Charging time 30 Clip continuous rec 79 Clip cutter trig (splitting clips 82 Clip name 44, 84 Clip review 73 Color bar 135 Computer 140 Connection settings file 165 Continuous operating time 30 D Deleting clips 87 Display screen 35, 127, 132 Dual rec
  • JVC GY-HM200U | Instruction Manual - Page 181
    , 155, 162 White balance adjustment 60 White paint 63 Wired LAN 145 Wired remote control 140 Wireless LAN 143 Z Zebra pattern 72 Zoom 49 Symbol 4K 47, 115 Index 181 Others
  • JVC GY-HM200U | Instruction Manual - Page 182
    the Product (hereinafter the "Licensed Software") provided by JVC KENWOOD Corporation (hereinafter the "Licensor") is copyrighted to User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a
  • JVC GY-HM200U | Instruction Manual - Page 183
    of several independent software components, and in each of such individual components (hereinafter the "Licensed Software"), a copyright of either JVC KENWOOD Corporation (hereinafter "JKC") or a third party subsists. The Product uses the software component designated in the End-User License
  • JVC GY-HM200U | Instruction Manual - Page 184
    B5A-0573-00 GY-HM200U/GY-HM200E/ GY-HM170U/GY-HM170E 4K MEMORY CARD CAMERA RECORDER . © 2015 JVC KENWOOD Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
.
4K MEMORY CARD CAMERA RECORDER
GY-HM200U/GY-HM200E
GY-HM170U/GY-HM170E
INSTRUCTIONS
.
The illustration here shows how the handle unit is attached using the unit supplied with
GY-HM200U/GY-HM200E.
GY-HM170U/GY-HM170E do not come with a handle unit.
The specifications and appearance of this product are subject to changes for further improvement
without prior notice.
Please check the latest version of the INSTRUCTIONS from the following Mobile User Guide. You can
also download the PDF from the Mobile User Guide.
Mobile User Guide
When you are outside, you can refer to the instructions from your Android phone or iPhone.
You can view the Mobile User Guide using the browser on your Android phone or iPhone.
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
In this manual, each model number is
described without the last letter (U/E) which
means the shipping destination.
(U: for USA and Canada, E: for Europe)
Only “U” models (GY-HM200U/GY-HM170U)
have been evaluated by UL.
Please read the following before getting started:
For Customer Use:
Model No.
Serial No.
Enter below the Serial No. which is located
on the body.
Retain this information for future reference.
GY-HM200U/GY-HM170U
IM 1.00
B5A-0573-00