JVC GY-HM200U Instruction Manual - Page 87
Deleting Clips
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Playback Time Code Playback Time code or user's bit recorded on an SD card can be displayed on the LCD monitor and viewfinder. Memo : 0 The time code is also superimposed on the video signal output from the [SDI OUT] terminal. K 0 If a section without time code is played back, the time code will stop. However, playback will continue. Deleting Clips Delete clip. Displaying Information during Shooting Pressing the [DISPLAY] button during playback displays the display screen. Pressing the [OIS/6] button each time changes the shooting information displayed (camera information display and hide display). 0 Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded. 0dB F1. 6 1/ 100 P 13000K Camera Information Display . Memo : 0 When [System] B [Record Set] B [Record Format] B System is set to "HD+Web", only SD or web files can be played back from slot B. In this case, files up-converted into the HD size are played back in the simple mode. 0 Trimming information is displayed while trimming is in progress. In this case, pressing the [OIS/6] button does not switch the display. . Memo : 0 Clips appended with OK marks cannot be deleted on the camera recorder. 0 Read-only clips can be deleted on a PC. Deleting One Clip Delete the clip (one clip) pointed by the cursor in [Delete Clips] B [This Clip] in the menu. Memo : 0 Clips with OK mark cannot be deleted. During Thumbnail Screen 1 Move the cursor to the clip to be deleted. Move the cursor to the clip to be deleted using the cross-shaped button (JKH I). 1 218G0005 2015-01-07 07:08:43 . 2 Press the [ZEBRA/5] button. The action selection screen is displayed. Playing Recorded Clips 87