JVC GY-HM200U Instruction Manual - Page 37
Adjusting the LCD Monitor and Viewfinder, Adjusting the LCD Monitor, Displays on the LCD Monitor
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Preparations Adjusting the LCD Monitor and Viewfinder You can monitor video images on this camera recorder using the viewfinder, LCD monitor, or both. Adjusting the LCD Monitor 2 Tilt 180 degrees upward Tilt 90 degrees downward Inverted LCD Normal LCD . Displays on the LCD Monitor and Viewfinder Screen (VF) LCD Viewfinder [VF SW] Item State of Viewfinder Screen LCD Monitor Screen LCD LCD Monitor Monitor Open Open Closed Enable Pulled out ON ON ON Enable Retracted ON OFF ON Disable - ON ON ON ON: Display on, OFF: Display off 0 "LCD Monitor Open" includes the state when the LCD display is inverted. 0 "LCD Monitor Closed" indicates the state when there is no display on the LCD monitor. Memo : 0 Press and hold the [DISPLAY] button for 2 seconds to turn ON/OFF the LCD monitor. 0 The function to switch between LCD monitor and viewfinder displays by pressing the [DISPLAY] button can be canceled by opening/closing or rotating the LCD monitor. 0 When [LCD/VF] B [VF SW] is set to "Enable", it is necessary to pull out the viewfinder in order to display the images on the viewfinder. (A P104 [ VF SW ] ) * When [LCD/VF] B [VF SW] is set to "Enable", images will be displayed on the viewfinder if the viewfinder is pulled out, regardless of the state of the LCD monitor. (A P104 [ VF SW ] ) 1 . 1 Open the LCD cover. 2 Incline the LCD monitor to a position that enables easy viewing. Rotate the LCD monitor to adjust the angle. 0 While the LCD monitor is open, you can rotate it 180 degrees upward or 90 degrees downward. 0 Rotating the LCD monitor 180 degrees upward enables you to see the screen from the lens side. To display the image when it is viewed from the opposite direction (mirror image), perform setting as follows. Set [Main Menu] B [LCD/VF] B [LCD Mirror] to "Mirror" B Set button (R) (A P105 [ LCD Mirror ] ) 3 Adjust the brightness, contour, and contrast of the LCD monitor. You can change the angle and brightness of the LCD monitor according to your usage condition. Changing the brightness of the screen will not affect the recorded images. 0 Use the [LCD Bright] menu to adjust the brightness of the LCD monitor. [Main Menu] B [LCD/VF] B [LCD Bright] (A P105 [ LCD Bright ] ) 0 Use the [LCD/VF Peaking] menu to adjust the contour of the LCD monitor. (The contour of the viewfinder screen will also be adjusted at the same time.) [Main Menu] B [LCD/VF] B [LCD/VF Peaking] (A P105 [ LCD/VF Peaking ] ) 0 Use the [LCD Contrast] menu to adjust the contrast of the LCD monitor. [Main Menu] B [LCD/VF] B [LCD Contrast] (A P105 [ LCD Contrast ] ) Adjusting the LCD Monitor and Viewfinder 37