JVC GY-HM200U Instruction Manual - Page 96
Camera Function Menu, with the [GAIN] or [WHT.BAL B/A/PRST] switch.
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Menu Display and Detailed Settings Camera Function Menu Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode. Bars For setting whether to output color bars. [Setting Values: On, ROff] Memo : 0 The audio test signals (1 kHz) can be output simultaneously with the color bar output. (A P112 [ Test Tone ] ) OIS For setting whether to enable image stabilizer. When "On" is selected, set the Level. [Setting Values: ROn, Off] 9 Level For setting the level of the image stabilizer. [Setting Values: High, RNormal] Memo : 0 The icon changes according to the level set. (A P128 [Image Stabilizer Mark] ) 0 When "High" is selected, correcting severe camera shake may cause the area surrounding the image to darken. Flicker Correction For setting whether to adjust image flicker that occurs under a fluorescent light. [Setting Values: On, ROff] Shutter For specifying shutter-related settings. Set to "Step" (fixed value) or "Variable" when operating with the J / K volume buttons on the side of the camera recorder. 0 Variable: Sets to variable scan. Use this setting when shooting a PC monitor. 0 Step: Sets to step shutter, which switches the shutter speed by a fixed value. [Setting Values: Variable, RStep] AE Speed For setting the convergence speed during AE (Auto Exposure). [Setting Values: RFast, Middle, Slow] AGC Limit For setting the maximum gain value of "AGC", which electrically boosts the sensitivity level according to the brightness automatically. [Setting Values: 24dB, R18dB, 12dB, 6dB] Auto Iris Limit (OPEN) For setting the limit value of the OPEN end when auto iris is enabled. [Setting Values: F4, F2.8, RF2, F1.8, F1.6, F1.4, F1.2] Auto Iris Limit (CLOSE) For setting the limit value of the CLOSE end when auto iris is enabled. [Setting Values: F11, F8, RF5.6, F4] EEI Limit For setting the shutter speed control range when the Automatic Shutter mode (EEI) is enabled. [Setting Values: 4F-stop, R3F-stop, 2F-stop] Smooth Trans For setting the shock reduction function, which slows down the sudden change when switching with the [GAIN] or [WHT.BAL B/A/PRST] switch. [Setting Values: ROff, Slow, Middle, Fast] Memo : 0 This function is disabled when AGC is operating. 96 Camera Function Menu