JVC GY-HM200U Instruction Manual - Page 73
Viewing Recorded Videos Immediately (Clip Review
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Shooting Viewing Recorded Videos Immediately (Clip Review) You can check (review) the last recorded video clip on the screen. However, the video clip cannot be played back if the settings of the camera recorder are different from the video format (Resolution/Frame Rate/Bit Rate/SD Aspect) of the clip. (A P115 [ W Resolution ] ) (A P115 [ W Frame Rate ] ) (A P115 [ W Bit Rate ] ) (A P116 [ SD Aspect ] ) Memo : 0 To use this function, assign "Clip Review" to any of the user buttons. "Clip Review" is assigned to the [C.REVIEW/4] button in factory default. 0 "Clip Review" can also be assigned to other user buttons. (A P39 [Assignment of Functions to User Buttons] ) Caution : 0 During Clip Review, only the [CANCEL] and [REC] buttons are enabled. Press the [CANCEL] button to cancel clip review and return to "STBY" (recording standby) mode. Press the [REC] button to cancel clip review and enter recording mode. It will take some time to start recording after the button is pressed. 0 When the last clip is less than 5 seconds, the whole clip is played back. 0 Only video clips in the currently selected slot can be reviewed. 0 When there are no clips in the selected slot, Clip Review function is disabled. 0 Clip Review is unavailable when Clip Continuous Rec is paused ("STBYC", yellow text). To operate Clip Review, use the [CANCEL] button to set to "STBYC" (white text) first. (A P79 [Clip Continuous Rec] ) 0 Clip Review is unavailable when the camera recorder is connected to an external equipment and the equipment is in recording state. 0 Clip Review is unavailable when operating View Remote via network connection. (A P158 [View Remote Feature K] ) 0 Clip Review does not function during live streaming. K 0 Clip Review does not function while SDI Rec Trigger is in the REC state. K . 1 Press the user button assigned with the "Clip Review" function during standby ("STBY" is displayed). Playback of the configured section starts. Memo : 0 The video clip is played back according to the setting in [Main Menu] B [Camera Function] B [User Switch Set] B [Clip Review]. By default setting (Last 5sec), the last 5 seconds of the clip is played back. (A P98 [ Clip Review ] ) 0 When playback is complete, the camera recorder exits Clip Review and returns to "STBY" (recording standby) mode. Viewing Recorded Videos Immediately (Clip Review) 73