JVC GY-HM200U Instruction Manual - Page 86
Playing back, In the thumbnail screen, move the cursor to, the clip to be played back.
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Playback Item Description FTP Upload Uploads a clip to the FTP server. 0 This Clip: Uploads the clip pointed by the cursor. 0 Selected Clips: Uploads the clips selected (appended with check mark). 0 All Clips: Uploads all clips. Delete Clips Deletes clip. However, clips with OK mark cannot be deleted. 0 This Clip: Deletes the clip pointed by the cursor. 0 Selected Clips: Deletes the clips selected (appended with check mark). 0 All Clips: Deletes all clips. Trim This Clip Trims the clip pointed by the cursor. Memo : 0 The object of action is the clip of the current slot being displayed. 0 [Selected Clips] cannot be performed if there are no selected (appended with check mark) clips. 0 [This Clip] cannot be performed if there are more than one selected (appended with check mark) clips. 0 If the write-protect switch of an SD card is set, OK mark cannot be appended or deleted, and the clips cannot be deleted and trimmed. Playing back Use the operation buttons on the side control panel of the camera recorder to play back. A B C . A Set Button (R) 0 Plays back/pauses the clip pointed by the cursor. 0 You can press the cross-shaped button (HI) to perform frame-by-frame forward playback during pause mode. B Cross-shaped Button (JKH I) 0 [J/K] Button: Skips in the reverse or forward direction. 0 [H/I] Button: 0 During Playback: Fast forwards in the reverse or forward direction. 0 While paused: Frame-by-frame playback in the reverse or forward direction. C [CANCEL/STOP] Cancel Button Stops playback. 1 In the thumbnail screen, move the cursor to the clip to be played back. Move the cursor to the clip to be played back using the cross-shaped button (JKH I). 2 Press the Set button (R). Playback of the selected clip starts. Audio Output during Playback 0 You can confirm the playback sound from the monitor speaker, or the headphone connected to the [x] terminal. When a headphone is connected to the [x] terminal, sound cannot be output from the monitor speaker. (A P139 [Connecting the Headphone] ) 0 Adjust the volume of the monitor speaker and headphone using the J / K volume buttons on the side of the camera recorder. 86 Playing Recorded Clips