JVC GY-HM200U Instruction Manual - Page 98
User Switch Set Item, USER1 ~ USER9, LCD KEY▲/LCD KEY▶/LCD, KEY▼/LCD KEY◀, Lolux, Clip Review
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Menu Display and Detailed Settings User Switch Set Item USER1 ~ USER9, LCD KEY▲/LCD KEY▶/LCD KEY▼/LCD KEY◀ By assigning one of the following functions to each of the [F.ASSIST/1], [TC/2], [LOLUX/3], [C.REVIEW/4], [ZEBRA/5], [OIS/6], [REC/7], [EXPANDED FOCUS/8], [AWB/9] buttons or the cross-shaped buttons on the LCD monitor, these buttons can be used to control the assigned function (on/off, start, switch). Set according to the shooting conditions. Usable only in the Camera mode. [Setting Values: None, Zebra, Marker, Bars, Focus Assist, OIS, LCD Backlight, Lolux, AE/FAW Lock, Face Detect, OK Mark, Clip Cutter Trig, Backup Trig, Clip Review, Load Picture File, White Balance, TC Preset, AWB, Rec, Preset Zoom1, Preset Zoom2, Preset Zoom3, Push AF/AF Lock, One Push Iris, Expanded Focus, Live Streaming K] Memo : 0 "Rec" can only be assigned to the [REC/7], [EXPANDED FOCUS/8] and [AWB/9] buttons. Lolux To increase the sensitivity when in dim surroundings, set a value in the Lolux mode. [Setting Values: 36dB, R30dB] Clip Review For specifying the operation when any of the [USER1]-[USER9], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to "Clip Review". 0 Last 5sec: Views about 5 seconds of the clip from the ending. 0 Top 5sec: Views about 5 seconds of the clip from the beginning. 0 Clip: Views the entire clip. [Setting Values: RLast 5sec, Top 5sec, Clip] Face Detect For specifying the operation when any of the [USER1]-[USER9], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to "Face Detect". Select the control to track results of face detection. 0 AF&AE: Sets auto focus and exposure control for the face that is being tracked. 0 AF: Sets auto focus for the face that is being tracked. [Setting Values: RAF&AE, AF] (A P53 [Adjusting the Focusing by Face Detection] ) Memo : 0 Face detection does not function when the "MF" mode is enabled using the [AF/MF] selection button. 0 When "AF" is specified, this function will be activated only when the "AF" mode is enabled using the [AF/MF] selection button. 0 When "AF&AE" is specified, this function will operate when the "AF" mode is enabled using the [AF/MF] selection button, and when one or more of the items (Gain, Iris and Shutter) is set to Auto mode. 9 Sensitivity For setting the level of ease of face detection. [Setting Values: Low, Middle, RHigh] 9 Hysteresis For setting the margin to maintain status when the face that is being tracked is lost. Set to "Fast" to select another object immediately if the face on the screen is lost. Set to "Slow" to operate at the same position for some time even if the face on the screen is lost. [Setting Values: Fast, RMiddle, Slow] 98 Camera Function Menu