JVC GY-HM200U Instruction Manual - Page 65
Audio Recording, P110 [Input1 Mic Ref./Input2 Mic Ref.
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Shooting Audio Recording You can record audio from the two channels (CH1/ CH2) in synchronization with video images on this camera recorder. Select from the four options below to record the audio. 0 Built-in Microphone 0 Microphone connected to [AUX] terminal 0 Microphone connected to [INPUT1] terminal O 0 Microphone connected to [INPUT2] terminal O . Selecting Audio to Be Recorded in Each Channel O Select the audio to be recorded in CH1/CH2. CH1 Switch Setting INT Connected Devices 0 Built-in Microphone 0 Microphone connected to [AUX] terminal INPUT1 CH2 INT Microphone connected to [INPUT1] terminal 0 Built-in Microphone 0 Microphone connected to [AUX] terminal INPUT1 Microphone connected to [INPUT1] terminal INPUT2 Microphone connected to [INPUT2] terminal 0 When CH1 or CH2 is set to "INT" and a microphone is connected to the [AUX] terminal, audio is recorded according to the setting in [Main Menu] B [A/V Set] B [Audio Set] B [CH1 INT]/[CH2 INT]. (A P110 [ CH1 INT ] ) (A P110 [ CH2 INT ] ) Memo : 0 When the [AUX] terminal is not connected, [Main Menu] B [A/V Set] B [Audio Set] B [CH1 INT]/[CH2 INT] is fixed at "Int. Mic L"/"Int. Mic R" respectively. Setting Input Channel to [INPUT1]/[INPUT2] Select the audio to input to [INPUT1] and [INPUT2] terminals with the [INPUT1]/[INPUT2] mode switch. Setting [LINE] [MIC] [MIC+48V] Description Use this setting when connecting to an audio device or other equipment. The reference input level is +4 dBu. Use this setting when connecting to a dynamic microphone. Use this setting when connecting to a microphone (phantom microphone) that requires a +48 V power supply. Memo : 0 When "MIC" or "MIC+48V" is selected, set the reference input level in [Main Menu] B [A/V Set] B [Audio Set] B [Input1 Mic Ref.]/[Input2 Mic Ref.]. (A P110 [Input1 Mic Ref./Input2 Mic Ref. O] ) Caution : 0 When connecting a device that does not require a +48 V power supply, make sure that it is not set to the "MIC+48V" position. 0 When the [INPUT1]/[INPUT2] mode switch is set to "MIC", make sure that a microphone is connected to the [INPUT1]/[INPUT2] terminal. If you increase the recording level when a microphone is not connected, noise from the input terminal may be recorded. 0 When a microphone is not connected to the [INPUT1]/[INPUT2] terminal, set the [INPUT1]/ [INPUT2] mode switch to "LINE" or adjust the volume with the [CH1]/[CH2] recording level adjustment knob. Audio Recording 65