JVC GY-HM200U Instruction Manual - Page 175
Is the [CH1/CH2 AUTO/MANUAL] switch set to AUTO?, Audio On FULL AUTO] set to Auto
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Symptom Action The [CH1/CH2] recording level 0 Is the [CH1/CH2 AUTO/MANUAL] switch set to "AUTO"? adjustment knob does not 0 Is Full Auto enabled? work. O Is [A/V Set] B [Audio Set] B [Audio On FULL AUTO] set to "Auto" in Full Auto mode? (A P112 [ Audio On FULL AUTO ] ) SD card cannot be initialized 0 Is the write-protect switch of the SD card turned on? (formatted). Make sure that the write-protect switch is turned off. (A P40 [Write-Protect Switch on the SD Card] ) Battery alarm appears even 0 Is the battery too old? after loading a charged battery. The time code and user's bit 0 Even in Camera mode or Media mode, the time code and user's bit are not displayed. may not be displayed depending to the type of display. 0 Is [LCD/VF] B [Display Settings] B [TC/UB] set to "Off"? To display the time code or user's bit, set it to "TC" or "UB". (A P107 [ TC/UB ] ) The date and time are not 0 The date and time are only displayed on the Display 1 and Display 2 displayed. screens in the Camera mode (during shooting). (A P127 [Display Screen in Camera Mode] ) 0 Is [System] B [Record Set] B [Time Stamp] set to "On"? To display the date and time, set it to "Off". (A P117 [ Time Stamp ] ) Incorrect display on the 0 Is [LCD/VF] B [VF SW] set to "Enable", and is the viewfinder in use viewfinder. without being pulled out? To use the viewfinder in this setting, pull out the viewfinder. (A P104 [ VF SW ] ) The actual recording time is 0 The recordable time may be shorter depending on the shooting shorter than the estimated conditions or the subject. time. Cannot connect to wireless LAN. K 0 Check the mode of connection and method of setting ([SSID] and [Passphrase] in cases other than WPS). (A P143 [Connecting via Wireless LAN] ) 0 Even if the Passphrase is wrong, "Completed the Setup Wizard. Please Input the Passphrase into Your Device." may appear at the browser setting depending on the type of encryption. Adjust [Passphrase] again. The View Remote screen turns 0 The network path is congested. black. Wait a while before refreshing (reloading) the web browser. The screen flickers. The screen freezes. Cannot perform remote operation. K The clips cannot be uploaded 0 Adjust the [Clip Server] settings. to the FTP server. K (A P122 [ Clip Server ] ) 0 The maximum size of the recorded clip is 64 GB. If a file size limit is set in the FTP server settings, set the size limit to more than 64 GB. 0 Take necessary action as described in "[List of FTP Transfer Errors K] (A P 171)". The wireless LAN is disconnected. K 0 The wireless LAN may be disconnected depending on the environment. Change the usage environment. 0 Connect via wired LAN. (A P145 [Connecting via Wired LAN] ) The images and audio sound 0 Depending on the type of network adapter used and the connection, during live streaming are choppy. K streaming may not be possible with the encoding bit rate specified. Please reduce the encoding bit rate. Others Troubleshooting 175