JVC GY-HM200U Instruction Manual - Page 69
Setting Time Code Generator, Presetting the Time Code
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Shooting Setting Time Code Generator Presetting the Time Code Time code and user's bit data generated from the internal time code generator are recorded. This section describes how to set [TC/UB] B [TC Preset]. (A P103 [ TC Preset ] ) Memo : 0 When [Main Menu] B [System] B [Record Set] B [Record Format] B [WFrame Rate] is set to "50p", "50i" or "24p", setting for "Drop" will be disabled. (A P115 [ W Frame Rate ] ) 0 You can configure the setting without accessing the [TC/UB] menu screen. (A P70 [Setting Time Code without Opening the Menu] ) Required Settings Before Preset 1 Set [TC/UB] B [TC Generator] to "Rec Run" or "Free Run". (A P103 [ TC Generator ] ) 0 [Rec Run]: Preset data in the time code generator operates in run mode during recording mode. Set this when recording continuous time code in connecting frames. 0 [Free Run]: Time code starts to operate in run mode from the preset time in the time code generator. 2 Select the framing mode for the time code generator (only when the frame rate setting is "60" or "30"). Set using [Main Menu] B [TC/UB] B [Drop Frame]. (A P104 [ Drop Frame ] ) 0 [Drop]: Sets the run mode of the time code generator to drop frame mode. Use this setting when placing emphasis on the recording time. 0 [Non Drop]: Sets the run mode of the time code generator to non-drop frame mode. Use this setting when placing emphasis on the number of frames. Memo : Drop frame/non-drop frame mode 0 When [Main Menu] B [System] B [Record Set] B [Record Format] B [Frame Rate] is set to "60p", "60i", or "30p", the actual number of frames per second is approximately 59.94 (29.97). However, the time code processing standard is "60p", "60i", or "30p" frames. To make up for the frame number discrepancy, the drop frame mode (Drop) drops the 00 frame and 01 frame every minute except for minutes that are multiples of 10. However, in the case of "60p", the 00, 01, 02 and 03 frame are dropped. 0 The non-drop frame mode (Non Drop) does not drop frames and ignores the discrepancy with the actual time. Setting Time Code . Setting Time Code Generator 69