JVC GY-HM200U Instruction Manual - Page 81
Interval Rec, Set the number of frames to record in [Rec, Frames]., Start recording.
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Shooting 2 Set the number of frames to record in [Rec Frames]. 0 Set using [Main Menu] B [System] B [Record Set] B [Rec Mode] B [Rec Frames]. (A P116 [ Rec Frames ] ) 3 Start recording. 0 Press the [REC] button to record only the number of frames specified in [Rec Frames] and pause. 0 The display changes ("STBYM" B "RRECM" B "STBYM" (yellow text)). 0 The card slot status indicator lights up in green. 4 Repeat Frame Rec. 0 Press the [REC] button again to record only the number of frames specified in [Rec Frames] and pause. 0 The display changes ("STBYM" B "RRECM" B "STBYM" (yellow text)). 0 Frame Rec continues until the recording is stopped (step 5). 5 Press and hold the [REC] button. 0 The card slot status indicator lights up in green. Caution : 0 Do not remove the SD card during recording ("RRECM", red text) or recording pause ("STBYM", yellow text). 0 To remove the SD card during Frame Rec, press the [CANCEL] button, check that "STBYM" (white text) is displayed and the card slot status indicator lights up in green before you remove the card. 0 When [Main Menu] B [TC/UB] B [TC Generator] is set to "Free Run", the time code will be recorded in "Rec Run". 0 Audio cannot be recorded. The audio level meter is grayed out. (A P128 [Audio Level Meter] ) Interval Rec In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one "clip" on the SD card. In this mode, recording and pause are performed repeatedly at the specified time interval. Only the specified number of frames is recorded. The recording can be written to the media as a single clip until it is stopped. Memo : 0 Audio will not be recorded. 0 Until a specified amount of recordings is accumulated, the file will not be written to the media. 0 After the specified number of frames is recorded and written to the media, recording will be performed until the same number is accumulated again. 0 If the specified amount is not reached when recording is stopped, normal recording is performed and frames are added to the ending of the clip until the amount is reached. (Padding) Press [REC] (Interval Rec starts) Press [REC] (Interval Rec stops) Recording resumes Recording resumes [Rec Interval] [Rec Interval] Pause Pause Normal recording Pause (Padding data) Records number of frames specified in [Rec Frames] Actual clips recorded to the media . Specific amount of data 1 Set [Rec Mode] to "Interval Rec". 0 Set [Main Menu] B [System] B [Record Set] B [Rec Mode] to "Interval Rec". (A P116 [ Rec Interval ] ) 0 The display changes ("STBY" B "STBYN"). 2 Set the number of frames to record in [Rec Frames]. Set using [Main Menu] B [System] B [Record Set] B [Rec Mode] B [Rec Frames]. (A P116 [ Rec Frames ] ) Special Recording 81