JVC GY-HM200U Instruction Manual - Page 70
Setting Time Code without Opening the, Run or Free Run.
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Shooting 1 Select [Main Menu] B [TC/UB] B [TC Preset] and press the Set button (R). (A P103 [ TC Preset ] ) The [TC Preset] screen appears. TC/UB TC Preset 00:00:00:00 1 Setting Time Code without Opening the Menu . Memo : 0 When [TC/UB] B [TC Generator] is set to "Regen", the parameter is displayed as "Regen" and cannot be selected. (A P103 [ TC Generator ] ) 2 Set the time code (hour, minute, second, frame). Use the cross-shaped button (HI) to place the cursor at the item to set, then use the crossshaped button (JK) to change the values. TC/UB TC Preset 00:00:00:00 Cursor . Memo : 0 Settings cannot be made in the following cases. 0 [TC/UB] B [TC Generator] has been set to "Regen". 0 Menu screen is displayed. 0 The camera recorder is not in the Camera mode. Setting Time Code 1 Set [TC/UB] B [TC Generator] to "Rec Run" or "Free Run". (A P103 [ TC Generator ] ) 2 Press the [TC/2] button. The [TC Preset] setting screen appears. During non-drop During drop frame frame . Memo : 0 Press the [C.REVIEW/4] button to reset each digit to "0". The cursor moves to the time digit (left). 3 Check the values and press the Set button (R). 0 The time code is set and the screen returns to [TC/UB]. 0 To cancel the setting, press the [CANCEL] button. 4 Press the [MENU] button. Returns to the normal screen. TC Preset Cursor During drop frame During non-drop frame . 3 Set the time code (hour, minute, second, frame). Use the cross-shaped button (HI) to place the cursor at the item to set, then use the crossshaped button (JK) to change the values. Memo : 0 Press the [C.REVIEW/4] button to reset each digit to "0". The cursor moves to the time digit (left). 70 Setting Time Code Generator