JVC GY-HM200U Instruction Manual - Page 91
Trimming Recorded Clips, Press the [ZEBRA/5] button.
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Playback Trimming Recorded Clips You can extract (trim) the necessary parts of a clip recorded in the SD card. The trimmed clip is saved as a new file on the same SD card as the original clip. No changes are made to the original clip. 1 Switch to Media mode. Switch the mode using the [MODE] selection button on the side control panel. 2 Move the cursor to the clip to be trimmed. Move the cursor to the clip to be trimmed using the cross-shaped button (JKH I). 2 . 3 Press the [ZEBRA/5] button. The action selection screen is displayed. 4 Select [Trim This Clip], and press the Set button (R). Playback of the selected clip starts. Select Range Deselect All Add OK Mark... Delete OK Mark... FTP Upload... Delete Clips... Trim This Clip 4 282min 3840x2160 30p 150M 1000/ 2000 00 : 00 : 00.00 Jan 24,2015 12 :34 : 56 A B . IN OUT TRIM 4030 20 10 0 0 30min C 11: 22: 33.00 11: 23: 44.00 00 : 08 : 22 A Guide Operation guide B Position bar 6 : Current position of the video 7 : Position to start trimming (in point) 8 : Position to end trimming (out point) C Trimming information W or Y : Indicates the available space in the storage media (W or Y) 7 : Indicates the time code of the in point 8 : Indicates the time code of the out point 9 : Indicates the duration from the in point to the out point Memo : 0 The trimmed clip will be saved to the same card slot as that of the original clip. 0 [Duration] appears in yellow in the following durations. Trimming cannot be performed in this case. 0 When [Main Menu] B [System] B [Record Set] B [Record Format] B [System] is set to "4K": 3 minutes or longer; setting other than "4K": 10 minutes or longer. 0 [Duration] appears in yellow if the duration is longer than the recordable time on the storage media. Trimming cannot be performed in this case. 0 When trimming starts, the display switches to the Media Display 2 screen. 5 Specify the in point. 0 Operate buttons such as H/I or J/K to move the video to the in point. (A P86 [Playing back] ) 0 Specify the in point by pressing the [LOLUX/ 3] button at the point you want to start trimming. 6 Specify the out point. 0 Operate buttons such as H/I or J/K to move the video to the out point. (A P86 [Playing back] ) 0 Specify the out point by pressing the [C.REVIEW/4] button at the point you want to end trimming. 7 Perform trimming. Press the [ZEBRA/5] button to perform trimming. Memo : 0 While trimming is in progress, you can press the [CANCEL] button to return to the thumbnail screen. 0 While trimming is in progress, you can press the [DISPLAY] button to switch the display, but the trimming information is displayed at all times. 0 When trimming the in and out point, the in point trimmed may be up to one second before the specified in point and the out point trimmed may be up to one second behind the specified out point. Trimming Recorded Clips 91