JVC GY-HM200U Instruction Manual - Page 122
Clip Server, Clip-FTP1 to Clip-FTP4, The name specified in the respective, Alias] items is displayed
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Menu Display and Detailed Settings Clip Server For setting the server and directory for uploading recorded clips in the SD card to the FTP server. 9 Clip-FTP1 to Clip-FTP4 (The name specified in the respective [Alias] items is displayed) o Alias For setting a name to distinguish the settings of this camera recorder. The name set in this item will appear on the [FTP Upload] action screen of the thumbnail display. * Enter not more than 31 characters. o Protocol For setting the protocol of the FTP server to be connected. 0 FTP: Protocol that does not encrypt the incoming and outgoing data. 0 SFTP: Protocol that encrypts incoming and outgoing data using SSH. 0 FTPS: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts). 0 FTPES: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted). [Setting Values: RFTP, SFTP, FTPS, FTPES] o Server For setting the server name ("mystation.com", etc.) or the IP address ("192.168.0.1", etc.) of the FTP server. * Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.]. o Port Enter the FTP server port number to use using an integer between 1 and 65535. The default value varies with the Protocol setting. (FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21) o Dir. Path Enter the path name for the directory to upload to ("/pub", "/home/user", etc.) * Enter not more than 127 characters. o Username Enter the user name for connecting to the FTP server. * Enter not more than 31 characters. o Password Enter the password for connecting to the FTP server. * Enter not more than 31 characters. o PASV Mode For setting whether to set the communication mode used for file transfer to the passive mode. Set to "On" if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established. [Setting Values: On, ROff] Memo : 0 When [Protocol] is set to "SFTP", this item appears as "---" and cannot be selected. Reset Network Restores all items in the [Network] menu to their default settings. 122 System Menu