JVC GY-HM200U Instruction Manual - Page 170
Others, Error Messages and Actions, Turn Power Off Turn Back
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Error Messages and Actions Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as follows according to the error status. Memo : 0 This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder again. Error Message Status Action Turn Power Off Turn Back On System error. Turn off the power, and turn it on Later * The warning tone sounds and the again. tally lamp blinks twice every If the error persists, please contact second. the local dealers in your area. Fan Stop Detected Please Turn P.Off 0 The fan stopped running. Please contact the local dealers in your area. Fan Maintenance Required Usage time of the fan has exceeded Check the fan and replace 9000 hours. accordingly. For more details, please contact the local dealers in your area. Memo : 0 You can check the usage time of the fan in [System] B [System Information] B [Fan Hour]. (A P114 [ Fan Hour ] ) Getting Overheated. Please Turn Power Off. 0 The battery has exceeded the specified temperature. 0 The power turns off automatically after about 15 second. 0 Wait until the temperature drops or replace the battery. 0 If the error persists, please contact the local dealers in your area. Rec Inhibited [REC] button is pressed when the Turn off the write-protect switch of write-protect switch of the SD card the SD card, or insert a recordable is set. SD card. (A P40 [SD Card] ) Lost Media Info * 0 Card is removed while recording Restore the card using this camera is in progress. recorder. 0 Card is removed while (A P43 [Restoring the SD Card] ) formatting is in progress. 0 Card is removed while restoring is in progress. 0 Card is removed while adding the OK mark. 0 Card is removed while writing a setup file. 0 Card is removed while deleting a clip. (*: A, B) Others 170 Error Messages and Actions