JVC GY-HM200U Instruction Manual - Page 33
Initial Settings, center of the [POWER ON/OFF] switch to set
View all JVC GY-HM200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Initial Settings When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built-in clock in the [Initial Setting] screen. All operations are disabled until initial settings are complete. Memo : 0 The menus and messages on the screen of the LCD monitor or viewfinder are displayed in the selected language. 2 Select a language using the cross-shaped button (JK), and press the Set button (R). The Initial Setting screen appears. Preparations . Memo : 0 It is recommended to use the AC adapter as the power supply. 0 Attach the lens cap. 1 Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to "ON". A language selection screen appears. 0 For U models English Français Español Language . 3 Ensure the lens cap is attached, and press the Set button (R). 0 Self-diagnosis starts. 0 A progress bar appears, and "Complete Diagnosis" appears when the diagnosis is complete. . 0 For E models English Français Deutsch Italiano Español Pусский Language . . Memo : 0 It takes about 6 minutes to complete the diagnosis. During the diagnosis, do not operate or turn off the camera recorder. Initial Settings 33