JVC GY-HM620U Instruction Manual

JVC GY-HM620U Manual

Get JVC GY-HM620U PDF manuals and user guides View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals

JVC GY-HM620U manual content summary:

  • JVC GY-HM620U | Instruction Manual - Page 1
    reference. Model No. GY-HM660U/GY-HM620U Serial No. IM 1.00 Please read the following before getting started: Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. In this manual, each model number is
  • JVC GY-HM620U | Instruction Manual - Page 2
    2
  • JVC GY-HM620U | Instruction Manual - Page 3
    IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • JVC GY-HM620U | Instruction Manual - Page 4
    the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. . This device complies may cause undesired operation. Changes or modifications not approved by JVC could void the user's authority to operate the equipment. This
  • JVC GY-HM620U | Instruction Manual - Page 5
    A REGLER PAR L'UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME. Le symbole de l'éclair à l'intérieur d'un triangle équilatéral est importantes au sujet desquelles des renseignements se trouvent dans le manuel d'instructions. Ces symboles ne sont utilisés qu'aux Etats-Unis. CAUTION:
  • JVC GY-HM620U | Instruction Manual - Page 6
    be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly. When using the AC adapter in
  • JVC GY-HM620U | Instruction Manual - Page 7
    product is not supplied fitted with a mains plug then follow the instructions given below: DO NOT make any connection to the Larger Terminal coded To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel. When you are not using the AC
  • JVC GY-HM620U | Instruction Manual - Page 8
    with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel GERMANY Sehr geehrter Kunde, sehr geehrte Kundin
  • JVC GY-HM620U | Instruction Manual - Page 9
    Introduction o Para Brasil Informação sobre eliminação de baterias Este produto não deverá ser eliminado como lixo doméstico em geral. Devolva a bateria velha ao comerciante ou para a rede autorizada, para que seja devolvida ao fabricante ou importador. A reciclagem e eliminação de lixo em uma
  • JVC GY-HM620U | Instruction Manual - Page 10
    Camera 70 Setting Zebra Pattern 71 Setting Spot Meter 72 Acquiring Positioning Information by GPS a 74 Viewing Recorded Videos Immediately (Clip Review 74 Splitting the Clips Freely (Clip Cutter Trig) ....... 75 Recording Simultaneously at Two Different Definitions a 76 Series Rec 76 Dual Rec
  • JVC GY-HM620U | Instruction Manual - Page 11
    Introduction Menu Display and Detailed Settings Basic Operations in Menu Screen 94 Display and Description of the Menu Screen 95 Text Input with Software Keyboard 96 Menu Screen Hierarchical Chart 97 Camera Function Menu 98 User Switch Set Item 100 Camera Process Menu 102 Detail/Adjust Item
  • JVC GY-HM620U | Instruction Manual - Page 12
    Tone 182 Troubleshooting 182 Specifications GY-HM660U/GY-HM660E only. b : Feature available on GY-HM620U/GY-HM620E only. Content of this manual 0 All rights reserved by JVC KENWOOD Corporation. Unauthorized duplication or reprinting of this manual in this instruction manual are trademarks and/
  • JVC GY-HM620U | Instruction Manual - Page 13
    and is easy on the hand during shooting. JVC's Proprietary FALCONBRID HighQuality Imaging Engine The FALCONBRID high MP4 (MPEG-2 HD)/AVCHD File Formats Inheriting the concept of ProHD memory camera recorders, this camera recorder can support various file formats, such as AVCHD and QuickTime (H.264 SD
  • JVC GY-HM620U | Instruction Manual - Page 14
    function that covers the entire screen. It can switch to manual focus as well. A built-in optical image stabilizer service supported, which enables highly-reliable and stable data transmission, "SMPTE ST2022-1/2" and "RTMP" live streaming are possible. Application Software Provided The [JVC ProHD
  • JVC GY-HM620U | Instruction Manual - Page 15
    batteries. We do not guarantee the safety and performance of this device if an unspecified battery is used. o For details, refer to the "INSTRUCTIONS" of the battery. o ATTENTION: The product you have purchased is powered by a rechargeable battery that is recyclable. Please call 1-800-8-BATTERY for
  • JVC GY-HM620U | Instruction Manual - Page 16
    Introduction SDHC/SDXC Cards o SDHC/SDXC card is referred to as SD card in this manual. o This camera recorder saves the recorded images and audio sound on the SD card (sold separately) in the card slot. o If the SD card contains
  • JVC GY-HM620U | Instruction Manual - Page 17
    LCD Monitor and Viewfinder o The LCD monitor and viewfinder screen are manufactured using high-precision technology. Black spots may appear on the LCD monitor and viewfinder screen, or red, blue, and/or white spots may not disappear. However, this is not a malfunction and these spots are not
  • JVC GY-HM620U | Instruction Manual - Page 18
    Storage Class) Upon access via a web browser and selecting [Change] on the [Change to Remote Edit Mode?] screen on the camera or the web browser GY-HM660 only Remote Edit Mode * * Selecting a mode other than the Metadata Edit mode via the web browser, or selecting [Exit] on the [Remote Edit Mode
  • JVC GY-HM620U | Instruction Manual - Page 19
    of SD card is not possible in Camera mode. However, you can check the most recently recorded video clip. (A P74 [Viewing Recorded Videos Immediately (Clip Review)] ) Media Mode USB Mode 0 This mode allows you to play back or delete clips recorded on the SD card. 0 When a playable SD card is
  • JVC GY-HM620U | Instruction Manual - Page 20
    with the [REC] button R on the grip and the [REC/HOLD] button Z at the top of the handle. ZOOM REC SERVO MANUAL JI J [ZOOM SERVO/MANUAL] Zoom Operation Servo/Manual Switch Set to "SERVO" when using the zoom lever at the grip j or the zoom lever at the handle a. (A P48 [Zoom Operation
  • JVC GY-HM620U | Instruction Manual - Page 21
    handle. S [C.REVIEW/7] Clip Review/User 7 Button For checking the most recently captured images. (A P74 [Viewing Recorded Videos Immediately (Clip Review)] ) You the camera recorder may fall and cause injuries. Check the instruction manual provided with the shoulder belt before using. c [POWER/CHG]
  • JVC GY-HM620U | Instruction Manual - Page 22
    ] Focus Push Auto Button (A P50 [One Push Auto Focus] ) D [IRIS] Iris Auto/Manual Selection Button (A P54 [Adjusting the Iris] ) E [PUSH AUTO] Iris Push Auto Button (A Adjusting the White Balance] ) H [SHUTTER] Shutter Speed Auto/Manual Selection Button (A P56 [Setting the Electronic Shutter] ) I
  • JVC GY-HM620U | Instruction Manual - Page 23
    Introduction R [OIS/2] Optical Image Stabilizer/User 2 Button For switching the image stabilizer feature mode ON or OFF. You can also use it as a user button by assigning a specific feature in the menu setting to this button. (A P38 [Assignment of Functions to User Buttons] ) S [FOCUS ASSIST/1]
  • JVC GY-HM620U | Instruction Manual - Page 24
    LCD Monitor A B MENU/THUMB C D CANCEL N ML K J CH1 CH2 INT INPUT1 INPUT2 INPUT1 INPUT2 LINE MIC MIC +48V MONITOR CH1 BOTH CH2 AUTO MANUAL LCD BRIGHT PEAKING DISPLAY STATUS CH1 CH2 E FG HI . A LCD Monitor (A P36 [Adjusting the LCD Monitor and Viewfinder] ) B [MENU/THUMB] Menu
  • JVC GY-HM620U | Instruction Manual - Page 25
    Cover] ) C Focus Ring (A P49 [Focus Operation] ) D Zoom Ring (A P48 [Zoom Operation] ) To operate zoom with this ring, set the [ZOOM SERVO/MANUAL] switch to "MANUAL". E Iris Ring (A P54 [Adjusting the Iris] ) To operate auto iris, press the [IRIS] button on the side control panel. (a mark appears on
  • JVC GY-HM620U | Instruction Manual - Page 26
    Introduction Basic System Diagram Shoulder Belt GY-HM660/GY-HM620 Microphone Earphone Wireless Microphone Receiver GY-HM660 only [INPUT1]/ [INPUT2] [x] [TC] GY-HM660/GY-HM620 [AUX] [HOST] Network Adapter [SDI OUT] [HDMI] [AV] Battery Monitor Monitor SDI Cable BNC HDMI Cable AV Cable
  • JVC GY-HM620U | Instruction Manual - Page 27
    the screw hole that suits the tripod. To prevent the camera recorder from falling off, which may result in injuries or damages, read the "INSTRUCTIONS" of the tripod to be used and make sure that it is securely attached. Preparations INPUT2 INPUT1 BATT.RELEASE A AUX P/OCWHGER REC DEVICE AV
  • JVC GY-HM620U | Instruction Manual - Page 28
    Opening/Closing the Lens Cover Use the lens cover open/close switch to open or close the lens cover. Before shooting, open the lens cover. When this camera recorder is not in use, close the lens cover to protect the lens. Detaching the Hood 0 Remove the hood when attaching a filter, teleconverter
  • JVC GY-HM620U | Instruction Manual - Page 29
    the battery immediately after using while the battery is still warm, it may not be fully charged. 0 For details, refer to the "INSTRUCTIONS" of the battery. o Continuous Operating Time (supplied SSLJVC50 battery pack) Approx. 3 hrs a Approx. 3 hrs 20 mins b Memo : 0 Actual operating times may differ
  • JVC GY-HM620U | Instruction Manual - Page 30
    Preparations Using AC Power (DC IN Power) Use the supplied AC adapter to operate the camera recorder with AC power. 2 POWER ON 1 OFF (CHG) MODE . 1 Connect the DC cable of the AC adapter to the [DC] terminal of the camera recorder. 0 Check that the power switch of the camera recorder is set
  • JVC GY-HM620U | Instruction Manual - Page 31
    Menu Screen (A P95 [Display and Description of the Menu Screen] ) POWER ON OFF (CHG) MODE Preparations . Warnings by Lamp and Warning Tone Warning status is indicated by tally lamp and warning tone. 0 The tally lamp blinks. 0 The warning tone is output from the monitor speaker or [x] terminal.
  • JVC GY-HM620U | Instruction Manual - Page 32
    Preparations Initial Settings When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built-in clock in the [Initial Setting] screen. All operations are disabled until initial settings are complete.
  • JVC GY-HM620U | Instruction Manual - Page 33
    Preparations 4 Press the Set button (R) after confirming the exit screen. The [Initial Setting] screen appears. 0 For U models . 0 For E models . Memo : 0 The [Initial Setting] screen appears when the power is turned on for the first time and when the power is turned on after the built-in battery
  • JVC GY-HM620U | Instruction Manual - Page 34
    Preparations Displays on the LCD Monitor and Viewfinder You can display the camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screen during shooting. Memo : 0 When [Main Menu] B [A/V Set] B [Video Set] B [Display On TV] is set
  • JVC GY-HM620U | Instruction Manual - Page 35
    Jan 12, 2016 12 :34 : 56 4030 20 10 0 Warning Display Area . P13000K 5.6f t ND 1 /64 AE+6 0dB F1. 6 1/ 100 . * These are screen examples of GY-HM660. The contents displayed are different depending on the model and settings. 35
  • JVC GY-HM620U | Instruction Manual - Page 36
    Adjusting the LCD Monitor and Viewfinder You can monitor video images on this camera recorder using the viewfinder, LCD monitor, or both. Adjusting the LCD Monitor 3 LCD BRIGHT PEAKING Tilt 90 degrees 2 downward Inverted LCD Normal LCD DISPLAY Tilt 180 degrees upward 1 Preparations .
  • JVC GY-HM620U | Instruction Manual - Page 37
    Preparations Adjusting the Contour Use the [PEAKING +/－] button to adjust the contour of the LCD monitor. (The contour of the viewfinder screen will also be adjusted at the same time.) 0 The [+] button increases contour correction and the [－] button decreases contour correction. 0 Press the [+] and
  • JVC GY-HM620U | Instruction Manual - Page 38
    on the SD card is low. (Camera mode only) * Set using [Main Menu] B [System] B [Tally Lamp]. (A P116 [ Tally Lamp ] ) TIME CODE C.REVIEW/7 MENU/THUMB CANCEL FOCUS ASSIST/1 OIS / 2 LOLUX / 3 AE LOCK/4 ZEBRA/5 MARKER/6 TIME CODE . . Menu Setting Tally Lamp Functional information Warning
  • JVC GY-HM620U | Instruction Manual - Page 39
    SanDisk may result in recording failure or data loss. Estimated Recordable Time of SD Cards The estimated recordable time is only a guide. Differences may occur depending on the SD card in use and the battery condition. (A P118 [WResolution a, Resolution b] ) (A P119 [ Y Resolution a ] ) (A P118
  • JVC GY-HM620U | Instruction Manual - Page 40
    Preparations Inserting an SD Card This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback. 2 1 A 2 B 3 . 1 Open the SD card cover. 2 Insert an SD card with the notched corner pointing up. The status indicator of the card slot to which the card was
  • JVC GY-HM620U | Instruction Manual - Page 41
    Preparations Switching the SD cards When both card slots are inserted with SD cards, you can use the [SLOT A/B] button to switch the card to use. When the memory on an SD card is full during recording, data recording automatically switches to the other card. MENU/THUMB 1 Select [System] B [Media]
  • JVC GY-HM620U | Instruction Manual - Page 42
    Preparations 6 Formatting is complete. When formatting is complete, "Complete" appears and the camera recorder returns to the [Format Media] screen. Memo : 0 During formatting, menu operation is unavailable but you can start recording. However, this is only available when a recordable SD card is
  • JVC GY-HM620U | Instruction Manual - Page 43
    B depending on the recording time of the clip. 0 When copying videos in MP4 file format to a HDD using a PC, it is recommended to use [JVC ProHD Clip Manager Software], which is found in the supplied disc, to maintain continuity. Caution : 0 A clip recorded across several cards cannot be played back
  • JVC GY-HM620U | Instruction Manual - Page 44
    ] adjustment knob will be locked.) 0 Focus ring 0 Zoom lever at the grip/Zoom lever at the handle/ Zoom ring at the lens section 0 [ZOOM SERVO/MANUAL] switch 0 [FIX/VAR/OFF] zoom speed switch 0 Iris ring 0 [REC] button (at the top of the handle, on the grip and at the bottom of
  • JVC GY-HM620U | Instruction Manual - Page 45
    be turned off in [System] B [Tally Lamp]. (A P116 [ Tally Lamp ] ) 3 Check the most recently captured images. 0 Press the [C.REVIEW/7] button on the lens to activate the Clip Review function. The most recently captured images are played back on the LCD monitor and viewfinder screen. 0 After playback
  • JVC GY-HM620U | Instruction Manual - Page 46
    MXF (material exchange format) 0 AVCHD: AVCHD file format 0 QuickTime(H.264): QuickTime format (.MOV) Memo : 0 "MXF(MPEG2)" is not available for selection in the GY-HM620 series. b 0 The available options vary as follows depending on the [System] setting. oa 0 When "HD", "HD+SD", or "HD+Web" is set
  • JVC GY-HM620U | Instruction Manual - Page 47
    Shooting List of Formats The following is a list of file formats and video formats that can be selected on this camera recorder. o When [System] is set to "HD", "HD+SD", or "HD +Web", the options for slot A a are: When [System] is set to "HD" b : Record Format System Format Resolution Frame &
  • JVC GY-HM620U | Instruction Manual - Page 48
    switching. Using the Zoom Lever at the Grip 1 Set the [ZOOM SERVO/MANUAL] switch to "SERVO". 2 Press the zoom lever to zoom. 0 The AE+6 0dB F1.6 1/100 . Using the Zoom Lever at the Handle 1 Set the [ZOOM SERVO/MANUAL] switch to "SERVO". 2 Set the [FIX/VAR/OFF] zoom speed switch to "FIX" or
  • JVC GY-HM620U | Instruction Manual - Page 49
    and release within 1 second. 0 The camera recorder zooms to the stored zoom position. Memo : 0 To recall the stored zoom position, set the [ZOOM SERVO/MANUAL] switch to "SERVO". 0 Set the speed for shifting to the preset zoom position and the rate of change for starting and stopping the preset zoom
  • JVC GY-HM620U | Instruction Manual - Page 50
    /VF] B [Display Settings] B [Focus] is set to "Off", the auto focus icon will not appear. (A P110 [ Focus ] ) One Push Auto Focus While in the Manual Focus mode, pressing the [PUSH AUTO] button (within 1 minute) makes the camera recorder focus on the center of the frame automatically. Memo : 0 Face
  • JVC GY-HM620U | Instruction Manual - Page 51
    Shooting Focus Assist Function 0 When the [FOCUS ASSIST/1] button is pressed during shooting, the focused area is displayed in color. This enables easy and accurate focusing. 0 Select the color (blue, red or green) in the menu. Memo : 0 When [Main Menu] B [LCD/VF] B [Shooting Assist] B [Focus
  • JVC GY-HM620U | Instruction Manual - Page 52
    Shooting Adjusting the Focusing by Face Detection This function detects human faces and automatically adjusts focus during Auto Focus. It can also track moving objects. When several faces are detected, you can select one to focus on. Memo : 0 This function can also adjust the brightness
  • JVC GY-HM620U | Instruction Manual - Page 53
    value of the corresponding items when the user button that is assigned "AE Lock" is pressed can be fixed. (A P101 [ AE Lock ] ) Adjusting the Brightness Manually When the [FULL AUTO] switch is set to "OFF", some or all of the items (Iris, Gain and Shutter Speed) can be
  • JVC GY-HM620U | Instruction Manual - Page 54
    , press the [PUSH AUTO] button to adjust the iris according to the brightness of the object. Push Auto Iris When the camera recorder is in Manual Iris mode, hold down the [PUSH AUTO] button to change to Auto Iris mode temporarily. The iris will be automatically adjusted according to the brightness
  • JVC GY-HM620U | Instruction Manual - Page 55
    value during AGC operation can be set in [Main Menu] B [Camera Function] B [AGC Limit]. (A P99 [ AGC Limit ] ) . Manual Gain Mode (Manual Gain Switching) 1 Press the [GAIN] button to set to the Manual Gain mode. 0 The a icon on the screen disappears. 0 Use the [L/M/H] switch to set the gain of the
  • JVC GY-HM620U | Instruction Manual - Page 56
    each shooting frame) using the electronic shutter function. Electronic shutter can be adjusted manually or automatically. Manual Shutter Mode (Manual Shutter Switching) 1 Press the [SHUTTER] button to set to the Manual Shutter mode. 0 The a icon on the screen disappears. 0 Use the Set button (R) to
  • JVC GY-HM620U | Instruction Manual - Page 57
    Shooting During Variable Frame Rec Shutter Resolution/ Frame & Bit Rate Frame Rate 60, 30, 15 54, 27 720/30p, 720/24p, 1080/30p, 1080/24p 50, 25 48, 24, 12, 6 45, 22.5 40, 20, 10 36, 18 J ON (Step) ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ 1/10000 ^ ^ ^ ^ ^ 1/10000 1/4000 ^ ^ ^ ^ 1/
  • JVC GY-HM620U | Instruction Manual - Page 58
    Shooting Automatic Shutter Mode (Automatic Shutter Adjustment) 1 Press the [SHUTTER] button or set the [FULL AUTO] switch to "ON" to enter Automatic Shutter mode. 0 The a icon appears on the screen. 0 The camera recorder enters the Automatic Shutter mode. The shutter speed is automatically adjusted
  • JVC GY-HM620U | Instruction Manual - Page 59
    the main light source illuminating the subject changes. WHT BAL SHUTTER B A PRESET FULL AUTO ON OFF . Manual White Balance Mode (Manual Switching) 1 Press the [WHT BAL] button to set to Manual White Balance mode. 0 You can select the white balance with the [WHT BAL B/A/PRESET] selection switch
  • JVC GY-HM620U | Instruction Manual - Page 60
    Shooting Memo : 0 Use the cross-shaped button (I) to switch between the Color Temperature Selection screen and the Color Temperature Detailed Selection screen. 0 If [White Balance] has been assigned to the user button, pressing the assigned user button will display the Color Temperature Selection
  • JVC GY-HM620U | Instruction Manual - Page 61
    Shooting White Paint Adjustment You can fine-tune the white balance saved in Memory A or Memory B. 1 Select [Main Menu] B [Camera Process] B [White Balance] B [AWB Paint] and press the Set button (R). The White Paint Adjustment screen appears. 1 Automatic White Balance Mode (FAW: Fulltime Auto
  • JVC GY-HM620U | Instruction Manual - Page 62
    Shooting FAW Paint Adjustment You can fine-adjust the white balance that was automatically adjusted. 1 Select [Main Menu] B [Camera Process] B [White Balance] B [FAW Paint] and press the Set button (R). The FAW Paint Adjustment screen appears. 1 . 2 Adjust the R and B values. Use the cross-shaped
  • JVC GY-HM620U | Instruction Manual - Page 63
    Assignment of Functions to User Buttons] ) INPUT2 INPUT1 AUX P/OCWHGER CH1 CH2 INT INPUT1 INPUT2 INPUT1 INPUT2 LINE MIC MIC +48V LCD BRIGHT PEAKING AUTO MANUAL CH1 CH2 FULL AUTO ON OFF . Selecting Audio to Be Recorded in Each Channel Select the audio to be recorded in CH1/CH2. CH1 CH2
  • JVC GY-HM620U | Instruction Manual - Page 64
    recording standby, and stop modes. o Setting Input Channel to "INPUT1"/"INPUT2" 1 Set the [CH1/CH2 AUTO/MANUAL] selection switch to "MANUAL" for the channel to be adjusted manually. 2 Turn the corresponding [CH1]/[CH2] recording level adjustment knob to adjust the level. When [Audio Set] B [Limiter
  • JVC GY-HM620U | Instruction Manual - Page 65
    ] ) 0 When [A/V Set] B [Audio Set] B [Audio On FULL AUTO] is set to "SW Set", you can switch the audio recording mode with the [CH1/CH2 AUTO/MANUAL] selection switch on the camera recorder even if the [FULL AUTO] switch is set to "ON". (A P115 [ Audio On FULL AUTO ] ) Monitoring Audio Sound During
  • JVC GY-HM620U | Instruction Manual - Page 66
    Shooting Time Code and User's Bit Time code and user's bit data are recorded with the video in this camera recorder. The time code and user's bit are displayed on the viewfinder and LCD monitor during playback or recording. (Display screen) Displaying Time Code and User's Bit The time code and user
  • JVC GY-HM620U | Instruction Manual - Page 67
    Shooting Setting Time Code Generator Presetting the Time Code Time code and user's bit data generated from the internal time code generator are recorded. This section describes how to set [TC/UB] B [TC Preset]. (A P107 [ TC Preset ] ) Memo : 0 When [Main Menu] B [System] B [Record Set] B [Record
  • JVC GY-HM620U | Instruction Manual - Page 68
    Shooting 1 Select [Main Menu] B [TC/UB] B [TC Preset] and press the Set button (R). (A P107 [ TC Preset ] ) The [TC Preset] screen appears. Setting Time Code without Opening the Menu MENU/THUMB CANCEL 1 MENU/THUMB AE LEVEL . Memo : 0 When [TC/UB] B [TC Generator] is set to "Regen", the
  • JVC GY-HM620U | Instruction Manual - Page 69
    Shooting 4 Check the values and press the Set button (R). 0 The time code is set and the screen returns to the normal screen. 0 To cancel the setting, press the [CANCEL] button. Caution : 0 When the camera recorder is switched to Media mode during editing, editing will be canceled and the screen
  • JVC GY-HM620U | Instruction Manual - Page 70
    Shooting 1 Set [Main Menu] B [TC/UB] B [UB Mode] to "Preset", and press the Set button (R). (A P107 [ UB Mode ] ) The [UB Mode] setting screen appears. 1 . Memo : 0 When [TC/UB] B [TC Generator] is set to "Regen", the parameter is displayed as "Regen" and cannot be selected. (A P107 [ TC Generator
  • JVC GY-HM620U | Instruction Manual - Page 71
    Shooting Settings and Operation of the Camera Recorder 1 Set to Camera mode. (A P18 [Operation Modes] ) 2 Set [TC/UB] B [TC Generator] as follows. 0 Slave device: Select "Free Run(Ext)". 0 Master device: Select "Free Run". 3 Set LCD monitor or viewfinder to Display 1 screen. 4 Set the master device
  • JVC GY-HM620U | Instruction Manual - Page 72
    the Yellow brightness (%) and position of the darkest area in the screen. Frame may also be stopped at the current positions. Manual Displays the Green brightness (%) of (Blinks in green the specified when specifying position. the position) 2 Assign the "Spot Meter" function to
  • JVC GY-HM620U | Instruction Manual - Page 73
    disappear. 282min 100min 50min 00:00:00.00 Jan 12,2016 12:34:56 4030 20 10 0 P 13000K 5.6 f t ND 1/64 AE+6 0dB F1.6 1/100 . When [Manual] is selected A The brightness of the cursor position is displayed when the button is pressed. 282min 100min 50min 4030 20 10 0 00:00:00.00
  • JVC GY-HM620U | Instruction Manual - Page 74
    in progress signal. UTC and (signal strength: positioning medium) information can be obtained and recorded. Viewing Recorded Videos Immediately (Clip Review) You can check (review) the last recorded video clip on the screen. However, the video clip cannot be played back if the settings of the
  • JVC GY-HM620U | Instruction Manual - Page 75
    INPUT1 BATT.RELEASE A AUX P/OCWHGER REC DEVICE AV HD/SD B SDI HDMI REMOTE DC HOST . 1 Press the button assigned with the "Clip Review" function during standby ("STBY" is displayed). Playback of the configured section starts. Memo : 0 The video clip is played back according to the
  • JVC GY-HM620U | Instruction Manual - Page 76
    will only be recorded to that slot. 0 The [Rec Mode] is fixed at "Normal". 0 Clip Cutter Trig is disabled. 0 [Slot Mode] cannot be selected. 0 Clip Review can only be performed for slot A. ("No Media" appears if there is no card in slot A while a card is inserted into slot B.) 0 Playback of web
  • JVC GY-HM620U | Instruction Manual - Page 77
    Shooting 2 Start recording. 0 Insert recordable media in both slots, and press the [REC] button. 0 In the Dual Rec mode, recording to the media in both slots starts at the same time. 0 Both the card slot marks turn red, and the status indicators of both the card slots also light up in red. 100min
  • JVC GY-HM620U | Instruction Manual - Page 78
    Shooting Backup Rec 0 The Backup Rec mode allows you to make use of the media in slot B for backup recording by controlling the starting and stopping of recording in slot B without using the [REC] button. 0 Start or stop the recording using [Main Menu] B [System] B [Record Set] B [Slot Mode] B [
  • JVC GY-HM620U | Instruction Manual - Page 79
    Shooting 3 Start normal recording (normal recording into slot A) 0 Press any of the [REC] buttons. 0 Recording into the media in slot A starts. (The characters "RREC" appear in red.) 0 The card icon of slot A turns red (unselected state), and the status indicator of slot A blinks in red. Red (not
  • JVC GY-HM620U | Instruction Manual - Page 80
    0 Immediately after switching from Media mode to Camera mode 0 Immediately after setting [Rec Mode] 0 Immediately after the end of Clip Review 0 Immediately after changing file format 0 Immediately after changing video format Completed Clip (Recorded video and audio) Recording starts a number of
  • JVC GY-HM620U | Instruction Manual - Page 81
    . Memo : 0 The following operations cannot be performed while recording is paused (STBYC, yellow text). 0 Clip Review operation (A P74 [Viewing Recorded Videos Immediately (Clip Review)] ) 0 Switching SD card slots 0 Switching operation mode (A P18 [Operation Modes] ) Caution : 0 Do not remove the
  • JVC GY-HM620U | Instruction Manual - Page 82
    Shooting Caution : 0 If the power is cut off due to low battery power, a proper clip may not be generated. Frame Rec In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one "clip" on the SD card. In this mode,
  • JVC GY-HM620U | Instruction Manual - Page 83
    Shooting Interval Rec In normal recording, when the recording stops, the image and accompanying data from the start till the end of the recording are recorded as one "clip" on the SD card. In this mode, recording and pause are performed repeatedly at the specified time interval. Only the specified
  • JVC GY-HM620U | Instruction Manual - Page 84
    Shooting Variable Frame Rec Shooting in this mode allows you to obtain smooth slow motion or quick motion videos. Using different frame rate settings for recording and playback, videos captured at normal speed can be played back more smoothly than those in low or high speed playback. To enable
  • JVC GY-HM620U | Instruction Manual - Page 85
    Playback Playing Recorded Clips To play back clips recorded on SD cards, switch to the Media mode. Press and hold the [MODE] selection button in Camera mode to enter Media mode. A thumbnail screen of the clips recorded on the SD card is displayed. You can play back the selected clip on the
  • JVC GY-HM620U | Instruction Manual - Page 86
    and GY-HM620 series. If a file cannot be played back, it will appear in the thumbnail substitution display 2 described above. E Clip Name The file name (clip number) of the selected clip is displayed. F Operation Guide 0 Displays a guide for the current operation buttons. 0 The action selection
  • JVC GY-HM620U | Instruction Manual - Page 87
    Playback Detailed screen * Items that are common with the Standard screen will not be described. Refer to "[Standard screen] (A P 85)". A B Jan 1, 2016 00:00:19 C . A Thumbnail Thumbnail of the clip selected by the cursor. Use the cross-shaped button (HI) to move the cursor. B Scroll Mark (DE) 0
  • JVC GY-HM620U | Instruction Manual - Page 88
    Playback Memo : 0 The object of action is the clip of the current slot being displayed. 0 [Selected Clips] cannot be performed if there are no selected (appended with check mark) clips. 0 [This Clip] cannot be performed if there are more than one selected (appended with check mark) clips. 0 If the
  • JVC GY-HM620U | Instruction Manual - Page 89
    Playback Memo : 0 GPS function (recording of GPS information) is only available on the GY-HM660 series. a The GY-HM620 series can only provide the information display of the video with the recorded GPS information. b 0 When [System] B [Record Set] B [Record Format] B System is set
  • JVC GY-HM620U | Instruction Manual - Page 90
    Playback 3 Select [Delete Clips] B [This Clip] and press the Set button (R). A screen to confirm deletion appears. 3 . 4 Select [Delete] using the cross-shaped button (JK), and press the Set button (R). Deleting starts. Appending/Deleting OK Mark 0 You can append OK marks to the clips for
  • JVC GY-HM620U | Instruction Manual - Page 91
    Playback During Playback or Pause Screen 1 Press [FOCUS ASSIST/1] button during clip playback. 0 If the clip does not have an OK mark, an OK mark will be appended. 0 If the clip is appended with an OK mark, the OK mark will be deleted. Selecting Multiple Clips Randomly 1 Move the cursor to a clip
  • JVC GY-HM620U | Instruction Manual - Page 92
    Playback Selecting Multiple Clips Consecutively 1 Press the [LOLUX/3] button. 2 Select "Select Range" in the action selection screen, and press the Set button (R). 2 . 3 Move the cursor to the beginning (or end) of the range for multiple selection, and press the Set button (R). 4 Move the cursor to
  • JVC GY-HM620U | Instruction Manual - Page 93
    00 Jan 12,2016 12 :34 :56 A B . IN OUT TRIM 4030 20 10 0 0 30min C 11: 22: 33.00 11: 23:44.00 00 : 08 : 22 A Guide Operation guide B Position bar 6 : Current position of the video 7 : Position to start trimming (in point) 8 : Position to end trimming (out point) C Trimming information W or
  • JVC GY-HM620U | Instruction Manual - Page 94
    Menu Display and Detailed Settings Basic Operations in Menu Screen 0 Press the [MENU/THUMB] button on the side control panel of the camera recorder or on the LCD monitor to display the menu screen on the LCD monitor and viewfinder. 0 Various settings for shooting and playback can be configured on
  • JVC GY-HM620U | Instruction Manual - Page 95
    that there is a sub-menu to access. C Fixed Item Items that cannot be changed are displayed in gray and cannot be selected. D Operation Guide Guide for the current operation buttons. E Setting Value Setting values for the menu items. For menus with sub-menus, values are not displayed. F Scroll
  • JVC GY-HM620U | Instruction Manual - Page 96
    Menu Display and Detailed Settings Text Input with Software Keyboard Use the software keyboard to enter the [Setup File] subname, [Clip Name Prefix], and the settings under [Network] B [Settings]. Entering a subname (A P142 [Configuring Setup Files] ) A B H C G F D E . Entering the [Clip Name
  • JVC GY-HM620U | Instruction Manual - Page 97
    Menu Display and Detailed Settings Menu Screen Hierarchical Chart Main Menu... TC/UB... Camera Function... TC Generator Bars TC Preset OIS UB Mode Flicker Correction Drop Frame Flash Band Correction Shutter AE Level AE Speed AGC Limit Auto Iris Limit (OPEN) Auto Iris Limit (CLOSE) EEI
  • JVC GY-HM620U | Instruction Manual - Page 98
    & Bit Rate] is set to "24p" 0 When in the Automatic Shutter mode or when the shutter is turned on in the Manual Shutter mode (A P56 [Manual Shutter Mode (Manual Shutter Switching)] ) 0 When [Network] is set to "On(SDI Off)" or "On(HDMI Off)" 0 [Flash Band Correction] operates when the luminance
  • JVC GY-HM620U | Instruction Manual - Page 99
    Values: Area, Far/Near, ROff] (A P50 [AF Assist Function] ) Memo : 0 This setting is effective only when the [FOCUS] switch is set to "AUTO". 0 The manual focus adjustment mode is temporarily activated by turning the focus ring in the AF mode. If the focus ring is not operated for a certain time
  • JVC GY-HM620U | Instruction Manual - Page 100
    White Balance Mode (Manual Switching)] ) 0 None: Disabled. [Setting Values: RREC, AWB, None] Lolux To increase the sensitivity when in dim surroundings, set a value in the Lolux mode. [Setting Values: 36dB, R30dB] Clip Review For specifying the operation when any of the [USER1]-[USER7], [LCD KEY
  • JVC GY-HM620U | Instruction Manual - Page 101
    when the button assigned with "AE Lock" is pressed, or when any of the functions that can be locked is operated regardless of the mode (Manual or Auto). Preset Zoom1, Preset Zoom2, Preset Zoom3 For setting the speed for shifting to the preset zoom position and the rate of change for
  • JVC GY-HM620U | Instruction Manual - Page 102
    . 0 Limited Time: Activates the timer. During autofocus, the [Expanded Focus] feature turns off about 3 seconds after it is turned on. During manual focus, the [Expanded Focus] feature turns off about 3 seconds after you stop operating the focus ring. [Setting Values: RToggle, Momentary, Limited
  • JVC GY-HM620U | Instruction Manual - Page 103
    "Off", this item appears as "---" and cannot be selected. 9 Level For setting the starting point (knee point) of knee compression when [Knee] is set to "Manual". [Setting Values: R100.0%,97.5%,95.0%,92.5%, 90.0%,87.5%,85.0%] Memo : 0 When [Knee] is set to other than "Auto", or [WDR] is set to other
  • JVC GY-HM620U | Instruction Manual - Page 104
    Menu Display and Detailed Settings 9 Level This item can be specified separately when [Gamma] is set to "Standard" or "Cinema". 0 Increase the number: Enhances the gradation of black. However, the gradation of bright areas deteriorates. 0 Decrease the number: Enhances the gradation of bright areas.
  • JVC GY-HM620U | Instruction Manual - Page 105
    Menu Display and Detailed Settings Shooting Mode For switching the settings for image recording on the camera. 0 Standard: Normal shooting mode. This setting is suitable for shooting low-noise image quality. Use this mode in well lit places. 0 Extended: High sensitivity shooting mode. This setting
  • JVC GY-HM620U | Instruction Manual - Page 106
    Menu Display and Detailed Settings Enhancement Set to "On" to enhance the reproducibility of details. [Setting Values: ROn, Off] Skin Detail For turning On/Off the Skin Detail function, which is used to adjust the contour correction effect of the colors captured. Select "On" to soften the detail at
  • JVC GY-HM620U | Instruction Manual - Page 107
    Menu Display and Detailed Settings TC/UB Menu Menu screen for setting time code and user's bit. This item cannot be selected in the Media mode, or during recording. TC Generator For setting the operation of the time code. 0 Free Run(Ext): External time code input will be synchronized with this and
  • JVC GY-HM620U | Instruction Manual - Page 108
    Menu Display and Detailed Settings LCD/VF Menu Item for specifying settings related to the LCD monitor or viewfinder screen. This menu screen can be used to specify settings related to the Focus Assist mode, zebra pattern display, screen size, marker, and safety zone. In addition, it is also used
  • JVC GY-HM620U | Instruction Manual - Page 109
    the angle of view for the image according to the shooting purpose. (A P140 [Marker and Safety Zone Displays (Camera Mode Only)] ) Memo : 0 During Clip Review or when in the Media mode, the markers do not appear regardless of the setting. Marker For setting whether to display marker, safety zone, and
  • JVC GY-HM620U | Instruction Manual - Page 110
    zoom position. [Setting Values: Number, RBar, Off] Focus For setting the display method of the approximate distance to the subject in focus during manual focus. 0 Feet: Displays the focus in feet. 0 Meter: Displays the focus in meters. 0 Off: Does not display the focal length during focus. [Setting
  • JVC GY-HM620U | Instruction Manual - Page 111
    Menu Display and Detailed Settings TC/UB For specifying whether to display the time code (TC) or user's bit (UB) rate in the display on the LCD monitor and viewfinder screen. [Setting Values: UB, RTC, Off] Audio Meter For specifying whether to display the audio level meter on the LCD monitor and
  • JVC GY-HM620U | Instruction Manual - Page 112
    ", "Frame Rec" or "Variable Frame", [Rec Trigger] is fixed at "Off" and cannot be selected. 0 Set to "Off" if connecting to a device that does not support record trigger. 112
  • JVC GY-HM620U | Instruction Manual - Page 113
    selected. 0 Set to "Off" if connecting to a device that does not support HDMI TC. SD Aspect For setting the style of displaying down-converted images on CH1/CH2 AUTO/MANUAL] selection switches, the operation may be different as described below. 0 The limiter does not function when "MANUAL" is set.
  • JVC GY-HM620U | Instruction Manual - Page 114
    bypass the equalizer. 0 When the equalizer level is set to the + side, the audio may be distorted. In this case, reduce the recording level in Manual mode. 0 If the values of multiple frequencies are changed, the specified levels and the actual levels may be different due to interference between the
  • JVC GY-HM620U | Instruction Manual - Page 115
    ". 0 SW Set: Sets the audio recording mode following the [CH1/CH2 AUTO/MANUAL] selection switch setting. 0 Auto: Sets audio recording mode to the forced auto , it is not selectable when recording in Camera mode and during Clip Review. Setup File This allows you to save the menu settings as well
  • JVC GY-HM620U | Instruction Manual - Page 116
    /Time] and [Time Zone] cannot be reset. (A P117 [ Date/Time ] ) (A P117 [ Time Zone ] ) 0 This item is not selectable when recording in Camera mode, during Clip Review, and in Media mode. 116
  • JVC GY-HM620U | Instruction Manual - Page 117
    Menu Display and Detailed Settings Date/Time For setting the year, month, day, hour, and minute. Memo : 0 If the signal reception for GPS satellites allows date and time to be set based on the GPS information, you can set the time obtained from the GPS satellite by pressing the [FOCUS ASSIST/1]
  • JVC GY-HM620U | Instruction Manual - Page 118
    Menu Display and Detailed Settings 9 WFormat a, Format b For selecting the format of the file to be recorded to the SD card in slot A. a [Setting Values: RQuickTime(MPEG2), MP4(MPEG2), MXF(MPEG2), AVCHD, QuickTime(H.264)] b [Setting Values: RQuickTime(MPEG2), MP4(MPEG2), AVCHD, QuickTime(H.264)]
  • JVC GY-HM620U | Instruction Manual - Page 119
    Menu Display and Detailed Settings Memo : 0 For details on the combinations of usable [Record Format], refer to the following. (A P47 [List of Formats] ) 0 When [System] is set to "SD", this item is fixed as follows for the different models. 0 U model: "60i" 0 E model: "50i" 0 When [System] is set
  • JVC GY-HM620U | Instruction Manual - Page 120
    Menu Display and Detailed Settings Rec Mode 0 For selecting the record mode for recording to the SD card. (A P80 [Special Recording] ) 0 The selectable options vary according to the [Record Format] menu settings. Format No. of Frames for Frame & Bit Rate Setting values MP4 (MPEG2) QuickTime (
  • JVC GY-HM620U | Instruction Manual - Page 121
    Menu Display and Detailed Settings Memo : 0 When this is set to "Series", and recordable media are inserted in both slots, pressing the [REC] button starts recording only to the card in the selected slot (active slot). 0 When "Series" is selected, and [Record Format] B [WFormat] is set to "AVCHD",
  • JVC GY-HM620U | Instruction Manual - Page 122
    browser. Enter not more than 8 characters using the software keyboard. (Default value: HM660) 9 Login Name (Fixed) The login name is fixed as "prohd". It cannot be changed. 9 Change Password Changes the password for accessing via a web browser. The current password is displayed. Enter a new password
  • JVC GY-HM620U | Instruction Manual - Page 123
    Menu Display and Detailed Settings 9 Live Streaming Starts live distribution when "On" is selected. [Setting Values: On, ROff] Memo : 0 "On" cannot be selected if network connection is not established. 0 "On" cannot be selected when FTP is running. 0 Live streaming switches to "Off" when the power
  • JVC GY-HM620U | Instruction Manual - Page 124
    Menu Display and Detailed Settings o Adaptive Bit Rate If "On" is selected, the bit rate setting value of live streaming is set to maximum limit, and the bit rate is changed automatically according to changes in the network bandwidth. [Setting Values: On, ROff] Memo : 0 [Adaptive Bit Rate] is
  • JVC GY-HM620U | Instruction Manual - Page 125
    the settings for connecting to the network. A [Wizard] screen will appear according to the adapter connected to the rear [HOST] terminal. Follow the instructions to perform the setting. You can Load, Store, and Delete the settings specified on the [Wizard] screen. 9 Wizard A [Wizard] screen appears
  • JVC GY-HM620U | Instruction Manual - Page 126
    Menu Display and Detailed Settings 9 Meta-FTP1 to Meta-FTP4 (The name specified in the respective [Alias] items is displayed) o Alias For setting a name to distinguish the settings of this camera recorder. The name set in this item will be displayed in the [Import Metadata] options. * Enter not
  • JVC GY-HM620U | Instruction Manual - Page 127
    Menu Display and Detailed Settings o Server For setting the server name ("mystation.com", etc.) or the IP address ("192.168.0.1", etc.) of the FTP server. * Enter not more than 127 characters using singlebyte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.]. o Port Enter
  • JVC GY-HM620U | Instruction Manual - Page 128
    to add. 2 . Memo : 0 Adding items to [Favorites Menu] cannot be performed in the following cases. [USER1 Add] is displayed in gray in the operation guide. 0 Selected item is already added to [Favorites Menu]. 0 Number of menu items that can be added (20 items) is exceeded. 3 Press the [FOCUS ASSIST
  • JVC GY-HM620U | Instruction Manual - Page 129
    Menu Display and Detailed Settings 4 Press the [OIS/2] button. A delete mark (b) appears at the beginning of the menu item. Changing the Order of Items in [Favorites Menu] MENU/THUMB DISPLAY CANCEL . Memo : 0 When the [OIS/2] button is pressed again while the menu item with the delete mark (b)
  • JVC GY-HM620U | Instruction Manual - Page 130
    3 Select the menu or submenu item to move and press the Set button (R). The moving mode is activated and a position selection bar for the move appears. 6 Press the [FOCUS ASSIST/1] button. The option menu to exit the [Favorites Menu] editing mode appears. 7 Select [Save & Exit] and press the Set
  • JVC GY-HM620U | Instruction Manual - Page 131
    requires restoring. W!INCORRECT : 0 When Record Set is set to other than "AVCHD"/"SD"/"Web" with a Class 4 SD card inserted. 0 When the SD card is not supported. 0 When an SD card lower than Class 10 is inserted while in the XHQ mode. W!REC INH : 0 When attempting to record in 50i(HQ)/ 50i
  • JVC GY-HM620U | Instruction Manual - Page 132
    Display/Status Screen Memo : 0 This item is not displayed when [Main Menu] B [LCD/VF] B [Display Settings] B [Media Remain] is set to "Off". However, warnings will be displayed. (A P110 [ Media Remain ] ) 0 Displayed on the Display 0 and Display 1 screens only in the case of warnings. (When the
  • JVC GY-HM620U | Instruction Manual - Page 133
    function is activated, and [Main Menu] B [Camera Function] B [AE Level] is set to a value other than "Normal". (A P98 [ AE Level ] ) 0 When operated while manual operation is disabled, "AE" blinks for about 5 seconds. 0 When face detection is enabled and [Face Detect] is set to "AF&AE", q appears on
  • JVC GY-HM620U | Instruction Manual - Page 134
    is . detected (No display) When an incompatible USB adapter is detected, or when [Network] is set to "Off" Memo : 0 When a cellular adapter that supports LTE connection display is in use, "LTE" will appear to the left of the above icon when LTE connection is detected. Y Time Code (I)/User's Bit
  • JVC GY-HM620U | Instruction Manual - Page 135
    Actions] ) c Media Status ---- : No card found in the selected slot STBY RREC : Recording standby : Recording REVIEW : Clip Review (A P74 [Viewing Recorded Videos Immediately (Clip Review)] ) STBY P : Pre Rec recording standby (A P80 [Pre Rec] ) RRECP : Pre Rec recording (A P80 [Pre Rec
  • JVC GY-HM620U | Instruction Manual - Page 136
    warnings only. C Resolution Displays the video image resolution. D Frame Rate/Bit Rate Displays the frame rate and bit rate in pairs. E Operation Guide Displays a guide for the current operation buttons. F Audio Level Meter Displays the audio levels of CH1 and CH2. 4030 20 10 0 . Memo : 0 This item
  • JVC GY-HM620U | Instruction Manual - Page 137
    is . detected (No display) When an incompatible USB adapter is detected, or when [Network] is set to "Off" Memo : 0 When a cellular adapter that supports LTE connection display is in use, "LTE" will appear to the left of the above icon when LTE connection is detected. L Time Code (I)/User's Bit
  • JVC GY-HM620U | Instruction Manual - Page 138
    M Event/Warning Display Area Displays error messages. (A P178 [Error Messages and Actions] ) N Media Status PLAY STILL FWD * REV * STOP P.OFF : Playing : Still picture playback mode : High-speed playback in the forward direction (* playback speed: 5x, 15x, 60x, or 360x) : High-speed playback in
  • JVC GY-HM620U | Instruction Manual - Page 139
    Status Screen For checking the settings of the camera recorder. Camera 1 Screen/Camera 2 Screen For checking information related to shooting using the camera recorder. Audio Level Screen For checking audio related information such as microphone volume level. (A P63 [Audio Recording] ) . Video
  • JVC GY-HM620U | Instruction Manual - Page 140
    Marker and Safety Zone Displays (Camera Mode Only) Smoothening the Skin Color (Skin Detail Function) The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting purpose. The marker is displayed only in the Camera mode.
  • JVC GY-HM620U | Instruction Manual - Page 141
    Adjusting Color Matrix 0 The color matrix of the camera recorder can be adjusted to a color of the user's preference. 0 When shooting is performed using multiple cameras, the colors of the different cameras can be adjusted, and a color of the user's preference can be set on this camera recorder. 0
  • JVC GY-HM620U | Instruction Manual - Page 142
    8 ] : [CAM1] to [CAM2] : [ W 1 ] to [ W 8 ] : [ Y 1 ] to [ Y 8 ] Compatibility o Picture File Only Picture File of the GY-HM660 and GY-HM620 series can be loaded. o User File/All File 0 Only User File/All File of the GY-HM660 and GY-HM620 series can be loaded. 0 When User File/All File saved using
  • JVC GY-HM620U | Instruction Manual - Page 143
    . 7 Memo : 0 Files cannot be written in the following cases. (Displayed in gray, selection disabled) 0 When the inserted SD card is not supported or . not formatted. (File name appears as "---".) 0 Saving starts, and "Storing..." appears on the 0 When a write-protected SD card is inserted
  • JVC GY-HM620U | Instruction Manual - Page 144
    Loading a Setup File 1 Display the [Setup File] menu. Select [Main Menu] B [System] B [Setup File] and press the Set button (R). (A P115 [ Setup File ] ) 2 Select [Load File] and press the Set button (R). 3 Select [Picture File], [User File] or [All File], and press the Set button (R). The existing
  • JVC GY-HM620U | Instruction Manual - Page 145
    disc. 0 For details on how to install the application software, refer to the [User's Guide] of the [JVC ProHD Clip Manager] inside the supplied disc. 1 Connect the camera recorder to the PC using the PC in use. For details, refer to the "INSTRUCTIONS" of the PC. . Connecting External Devices 145
  • JVC GY-HM620U | Instruction Manual - Page 146
    When your PC cannot recognize the SD card Confirm and update the OS of your PC. OS Description Windows Vista Necessary to update to SP1 or higher. Windows Vista SP1/ Necessary to download the Windows Vista SP2 update software. (KB975823) 0 32 bit version http:// www.microsoft.com/ downloads/en
  • JVC GY-HM620U | Instruction Manual - Page 147
    Audio (Lch) Video GND BATT.RELEASE A AUX P/OCWHGER Audio (Rch) DEVICE AV SD/HD B SDI HDMI REMOTE HOST DC INPUT2 INPUT1 DEVICE AV REC REMOTE DC HOST Connecting via SDI 0 Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for
  • JVC GY-HM620U | Instruction Manual - Page 148
    Connecting the Headphone 0 Audio output from the [x] terminal can be selected using [A/V Set] B [Monitor] or the [MONITOR] selection switch on the camera recorder. (A P115 [ Monitor ] ) 0 The different combinations of settings that are output from the [x] terminal and monitor speaker are as follows
  • JVC GY-HM620U | Instruction Manual - Page 149
    the camera. (A P168 [Camera Control Function a] ) Live streaming By combining with the set top box decoder or PC application that supports live streaming, you can perform audio and video streaming via the network. (A P175 [Performing Live Streaming a] ) Preparing Network Connection a Operating
  • JVC GY-HM620U | Instruction Manual - Page 150
    wizard screen appears according to the type of adapter connected. Follow the instructions on the screen to perform setting. (A P150 [Connecting via Wireless LAN , type of encryption, Passphrase, and IP Address setting ("DHCP" or "Manual") in cases other than WPS 3 . 4 Setting is complete. After
  • JVC GY-HM620U | Instruction Manual - Page 151
    LAN] appears on the [Wizard] screen. . 2 Press the I button to display the [Select Connection Type] screen. Select "P2P". Follow the screen instructions to complete setting. Perform setting for the following. 0 Mode of connection 0 Method of setting * SSID and Passphrase in cases other than WPS
  • JVC GY-HM620U | Instruction Manual - Page 152
    ] screen. Follow the screen instructions to complete setting. Perform setting for the following. 0 IP address setting (DHCP or manual) 0 IP Address 0 Subnet use of improper settings may result in expensive bills from the phone service provider. Make sure that the setting is correct. 0 To avoid
  • JVC GY-HM620U | Instruction Manual - Page 153
    the frames below) Title1 sample
  • JVC GY-HM620U | Instruction Manual - Page 154
    Importing Metadata Download the metadata settings file (XML format) from the FTP server. 1 Select [Main Menu] B [System] B [Network] B [Import Metadata] and press the Set button (R). The [Import Metadata] screen appears. 3 Select [Import] on the confirmation screen, and press the Set button (R).
  • JVC GY-HM620U | Instruction Manual - Page 155
    Uploading a Recorded Video Clip a Upload clips recorded in the SD card to a preset FTP server. Configuring the FTP Server for Uploading For specifying the settings for connecting to the FTP server to upload recorded clips to (domain name, user name, password, etc.) as well as the directory of the
  • JVC GY-HM620U | Instruction Manual - Page 156
    5 Upload is complete. 0 After upload is complete, "Successfully Completed." appears on the screen. 0 Press the Set button (R) to return to the thumbnail screen. 5 . Selecting and Uploading Multiple Clips To select and upload multiple clips, refer to "[Selecting and Performing Operations on Multiple
  • JVC GY-HM620U | Instruction Manual - Page 157
    4 Upload is complete. 0 After all clips are uploaded successfully, "Successfully Completed." is displayed. Press the Set button (R) to return to the thumbnail screen. 0 When clips are not uploaded successfully, the following errors are displayed. FTP Resume Feature a When FTP transfer starts and
  • JVC GY-HM620U | Instruction Manual - Page 158
    cross-shaped button (HI) to display the [Network] screen. 0 Check the displayed [IP Address]. 3 Enter the user name and password. Enter the user name (prohd) and the password (initial password: 0000) on the login screen to display the main page of the camera. . 2 Start up the web browser on the
  • JVC GY-HM620U | Instruction Manual - Page 159
    Editing Metadata a You can create the metadata to be inserted into a recorded file, or rewrite the metadata of a recorded clip. Planning Metadata You can access the page for editing the camera recorder's metadata via a web browser on devices such as a smartphone, tablet terminal, or PC, and edit the
  • JVC GY-HM620U | Instruction Manual - Page 160
    Clip Metadata You can access the page for editing the metadata via a web browser on devices such as a smartphone, tablet terminal, or PC, and display or rewrite the metadata that is recorded to a clip. 1 Access the main page of the camera. Access the page via a web browser on devices such as a
  • JVC GY-HM620U | Instruction Manual - Page 161
    Memo : 0 When the menu or status is displayed, display of the confirmation screen will be put on hold. 0 If the menu is displayed on the camera recorder, close the menu. 0 If the status is displayed on the camera recorder, close the status display. 0 Pressing the Set button (R) on the camera
  • JVC GY-HM620U | Instruction Manual - Page 162
    7 Tap (click) [OK] on the confirmation screen. 0 Update of the metadata starts. 0 After update is complete, "Renewal of clip metadata is succeeded." is displayed. Tap (click) [OK]. 0 Returns to the screen in step 4. Renewal of clip metadata is succeeded. OK 7 . Memo : 0 If update failed, "Renewal of
  • JVC GY-HM620U | Instruction Manual - Page 163
    o Switching from a web browser A You will see a message indicating "It is necessary to change the camera mode to "Remote Edit Mode". Change the mode." on the web browser. It is necessary to change the camera A mode to "Remote Edit Mode". Change the mode. Cancel Change B . B Tap (click) [
  • JVC GY-HM620U | Instruction Manual - Page 164
    7 Select a method to upload the clips. A B C D 8 Select the clip server and start uploading. 0 Upon selecting the server to upoload clips to, an upload screen appears. 8 . A Upload all clips Uploads all the clips in the displayed slots. Tap (click) to move to the [Clip Server] screen. B Upload OK
  • JVC GY-HM620U | Instruction Manual - Page 165
    Memo : 0 To stop transfer, tap (click) the [Stop] button. Tapping (clicking) [Yes] on the confirmation screen stops the transfer halfway and brings you back to the main page. 0 If there already exists a file on the FTP server with a name identical to the file to be transferred, a confirmation screen
  • JVC GY-HM620U | Instruction Manual - Page 166
    View Remote Feature a You can access via a web browser on devices such as a smartphone, tablet terminal, or PC to check the live image and perform the following remote control operations. 0 Start/stop recording 0 Zooming 0 Register/delete preset zoom 1 Access the main page of the camera. Access the
  • JVC GY-HM620U | Instruction Manual - Page 167
    Registering/Deleting Preset Zoom Registering Preset Zoom You can register any 3 zoom positions. 1 Set to the Register Preset Zoom mode. Tap (click) the [Preset] button to switch to the Register Preset Zoom mode. HM660 01:12:54.19 Z 00 4 In the same way, register [B] and [C]. After all three
  • JVC GY-HM620U | Instruction Manual - Page 168
    out Position mark disappears . 3 Exit the Delete Preset Zoom mode. Tap (click) the [Clear] button to exit the Delete Preset Zoom mode. Memo : 0 The Clip Review function of the camera recorder is unavailable during View Remote operation. (A P74 [Viewing Recorded Videos Immediately (Clip
  • JVC GY-HM620U | Instruction Manual - Page 169
    D FOCUS Enables focusing operations. . E USER SWITCH You can enable or disable the user buttons that are assigned with a function. Connecting to the Network a . F MENU You can show or hide the display and menu characters on an external monitor as well as operation of menus, switching the
  • JVC GY-HM620U | Instruction Manual - Page 170
    Changing the Settings via a Web Browser a You can change the network-related settings by accessing via a web browser on devices such as a smartphone, tablet terminal, or PC. 1 Access the main page of the camera. Access the page via a web browser on devices such as a smartphone, tablet terminal, or
  • JVC GY-HM620U | Instruction Manual - Page 171
    Changing View Remote Function Settings For performing setting for using the View Remote function. A Changing Connection Setup You can change the settings for each of the preset items on the [Wizard] screen of the camera recorder. 0 If all the items cannot be displayed in a single page, scroll down
  • JVC GY-HM620U | Instruction Manual - Page 172
    D Settings on the [Select Setup Type] Screen E . E Settings on the [IP Address Configuration] Screen When "DHCP" is selected, all items will be grayed out. F Changing Metadata Server Settings You can make direct changes to the FTP server for importing the metadata set in [Main Menu] B [System] B [
  • JVC GY-HM620U | Instruction Manual - Page 173
    Saving the Connection Settings File 1 Select [Main Menu] B [System] B [Network]/[Settings] B [Connection Setup] and press the Set button (R). 2 Select [Store] and press the Set button (R). 5 Select [Store] and press the Set button (R). 4 2 . 3 Select the file to be newly saved (or overwritten)
  • JVC GY-HM620U | Instruction Manual - Page 174
    Reading the Connection Settings File 1 Select [Main Menu] B [System] B [Network]/[Settings] B [Connection Setup] and press the Set button (R). 2 Select [Load] and press the Set button (R). Deleting Connection Settings 1 Select [Main Menu] B [System] B [Network]/[Settings] B [Connection Setup] and
  • JVC GY-HM620U | Instruction Manual - Page 175
    [ Type ] ) 0 Depending on the type of network adapter used and the connection, the images and audio sound during live streaming can be choppy. Audio AAC Supported Protocols MPEG2-TS/UDP MPEG2-TS/TCP MPEG2-TS/RTP RTSP/RTP ZIXI RTMP Connecting to the Network a 175
  • JVC GY-HM620U | Instruction Manual - Page 176
    the communication path between the camera and the decoder, port forwarding setup is required. For details on the settings, please refer to the "INSTRUCTIONS" of the router in use. 0 The following parameters are required when connecting to this camera recorder using the RTSP/RTP. Port number: 554
  • JVC GY-HM620U | Instruction Manual - Page 177
    Memo : 0 You can also assign "Live Streaming" to a user button. (A P38 [Assignment of Functions to User Buttons] ) 0 You can view the status of distribution on the LCD monitor. (A P135 [Live streaming mark a] ) Icon . (Red) . (Red) Status Distribution in progress (good connection quality) Blinks
  • JVC GY-HM620U | Instruction Manual - Page 178
    Error Messages and Actions Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as follows according to the error status. Memo : 0 This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from
  • JVC GY-HM620U | Instruction Manual - Page 179
    Media Full No Clips No Media No Media No Clips 12h Continuation Record Status Action 0 Video format of the file for Clip Review is different from the current [WResolution] and [WFrame & Bit Rate] setting. Set [WResolution] and [WFrame & Bit Rate] correctly. (A P118 [WResolution a, Resolution
  • JVC GY-HM620U | Instruction Manual - Page 180
    Error message Status Action Access Denied. Access is denied. Adjust the Server and Port settings for [Metadata Server] or [Clip Server]. (A P125 [ Metadata Server ] ) (A P126 [ Clip Server ] ) Invalid Username or Password. Authentication for login to the FTP server failed. Adjust the
  • JVC GY-HM620U | Instruction Manual - Page 181
    setting is incorrect, or when the connection is lost during live streaming. Error message Invalid Address Multicast Is Not Supported Cannot Connect to Receiver TCP Disconnected Not Enough Bandwidth Connection Timeout Authorization Failed Connection Error Disconnected Status 0 The IP address
  • JVC GY-HM620U | Instruction Manual - Page 182
    [Audio Set] B [Alarm Level]. (A P115 [ Alarm Level ] ) Troubleshooting Symptom Action Power does not turn on. 0 Is the AC adapter properly the Viewfinder] ) The [CH1/CH2] recording level 0 Is the [CH1/CH2 AUTO/MANUAL] switch set to "AUTO"? adjustment knob does not 0 Is the [FULL AUTO] switch
  • JVC GY-HM620U | Instruction Manual - Page 183
    Symptom Action The time code and user's bit 0 Even in Camera mode or Media mode, the time code and user's bit are not displayed. may not be displayed depending to the type of display. 0 Is [LCD/VF] B [Display Settings] B [TC/UB] set to "Off"? To display the time code or user's bit, set it to "
  • JVC GY-HM620U | Instruction Manual - Page 184
    , 2/25-50/25fps, Rate 2/24-60/24fps LCD monitor 3.5-inch LCD, 16:9 920K pixels Viewfinder 0.45-inch LCOS, 1.22M pixels (852 x 480 x 3) Storage Section Item Supported media Slots Description SDHC/SDXC x 2 Others 184
  • JVC GY-HM620U | Instruction Manual - Page 185
    Video/Audio Item Description Recording time Approx. 25 minutes (8 GB SD card, 35 Mbps, VBR mode) HD mode (MOV/MP4/MXF: MPEG-2) a (MOV/MP4: MPEG-2) b Video QuickTime File Format (For recording file Final Cut Pro)/MP4 File Format/ format MXF File Format a QuickTime File Format (For Final
  • JVC GY-HM620U | Instruction Manual - Page 186
    Accessories Accessories Warranty Card (U model only) 1 INSTRUCTIONS (BASIC) 1 Document and Software Disc 1 AC Adapter 1 Power Cord (U model: 1, E model: 2) Battery 1 Large Eyecup 1 Dimensional Outline Drawing (Unit: mm) . 148.5 177.5 156.5 140 Others 415.5
  • JVC GY-HM620U | Instruction Manual - Page 187
    19, 34, 131 Cellular adapter 152 Charging time 29 Clip continuous rec 80 Clip cutter trig (splitting clips 75 Clip name 43, 86 Clip review 74 Color bar 140 Color matrix 141 Computer 145 Connection settings file 172 Continuous operating time 29 D Deleting clips 89 Display screen 34, 131
  • JVC GY-HM620U | Instruction Manual - Page 188
    Trimming 93 U USB mode 19, 35, 145 User button 38 User's bit 66 V Variable frame rec 84 Video format 46 View remote 166 Viewfinder 17, 30, 34, 37 W Warning 35, 182 Web browser 158, 162, 170 White balance adjustment 59 White paint 61 Wired LAN 152 Wired remote control 148 Wireless LAN
  • JVC GY-HM620U | Instruction Manual - Page 189
    the Product (hereinafter the "Licensed Software") provided by JVC KENWOOD Corporation (hereinafter the "Licensor") is copyrighted to User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a
  • JVC GY-HM620U | Instruction Manual - Page 190
    of several independent software components, and in each of such individual components (hereinafter the "Licensed Software"), a copyright of either JVC KENWOOD Corporation (hereinafter "JKC") or a third party subsists. The Product uses the software component designated in the End-User License
  • JVC GY-HM620U | Instruction Manual - Page 191
    191
  • JVC GY-HM620U | Instruction Manual - Page 192
    B5A-1277-00 GY-HM660U/GY-HM660E / GY-HM620U/GY-HM620E HD MEMORY CARD CAMERA RECORDER . © 2016 JVC KENWOOD Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
.
HD MEMORY CARD CAMERA RECORDER
GY-HM660U/GY-HM660E
GY-HM620U/GY-HM620E
INSTRUCTIONS
.
The specifications and appearance of this product are subject to changes for further improvement
without prior notice.
Please check the latest version of the INSTRUCTIONS from the following Mobile User Guide. You can
also download the PDF from the Mobile User Guide.
Mobile User Guide
When you are outside, you can refer to the instructions from your Android phone or iPhone.
You can view the Mobile User Guide using the browser on your Android phone or iPhone.
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
In this manual, each model number is
described without the last letter (U/E) which
means the shipping destination.
(U: for USA and Canada, E: for Europe)
Only “U” models (GY-HM660U/GY-HM620U)
have been evaluated by UL.
Please read the following before getting started:
For Customer Use:
Model No.
Serial No.
Enter below the Serial No. which is located
on the body.
Retain this information for future reference.
GY-HM660U/GY-HM620U
IM 1.00
B5A-1277-00