JVC GY-HM620U Instruction Manual - Page 71
Setting Zebra Pattern, Settings and Operation of the Camera, Recorder
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Shooting Settings and Operation of the Camera Recorder 1 Set to Camera mode. (A P18 [Operation Modes] ) 2 Set [TC/UB] B [TC Generator] as follows. 0 Slave device: Select "Free Run(Ext)". 0 Master device: Select "Free Run". 3 Set LCD monitor or viewfinder to Display 1 screen. 4 Set the master device and run the time code. 0 When the built-in time code generator is synchronized with the external time code data input, the Z icon on Display 1 screen lights up. 0 When time code is not synchronized or time code input is not available, the Z icon goes out. 00 : 00 : 00.00 Jan 24 ,2012 12 :34 : 56 4030 20 10 0 P13000K 5.6f t ND 1 /64 AE+6 0dB F1. 6 1/ 100 . Memo : 0 The built-in time code generator will continue operation even when the master device is disconnected after synchronization. 0 User's bit will become data in the master device. 0 While the [TC] terminal is connected, the time code may be out of synchronization when the [A/V Set] B [Video Set] B [HDMI/SDI Out] setting of the Master device and Slave device is being changed. (A P112 [ HDMI/SDI Out ] ) Setting Zebra Pattern When the luminance level range for displaying zebra patterns is specified, diagonal lines (zebra pattern) are displayed at areas with the specified luminance levels during shooting. AE LEVEL PUSH AUTO ZEBRA/5 . 1 Set the zebra display pattern. Select the display pattern in [LCD/VF] B [Shooting Assist] B [Zebra]. 2 Specify the brightness (luminance) level range for displaying zebra pattern. Specify the upper and lower limits of the luminance level in [LCD/VF] B [Shooting Assist] B [Zebra] B [Top] and [Bottom]. Item Top Settings Options Upper luminance 5% - 100%, Over limit for displaying (in 5 % increments) [Zebra] Bottom Lower luminance 0% - 100% (in 5 % limit for displaying increments) [Zebra] 3 Display the zebra pattern. Press the [ZEBRA/5] button to display the zebra pattern in the specified range. . During zebra pattern display, (zebra icon) is displayed on the display screen in Camera mode. Memo : 0 "Zebra" is assigned to [ZEBRA/5] button in factory default. 0 "Zebra" can also be assigned to other user buttons. (A P38 [Assignment of Functions to User Buttons] ) 71
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/71.png)