JVC GY-HM620U Instruction Manual - Page 37
Adjusting the Viewfinder, Incline the viewfinder vertically to
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Preparations Adjusting the Contour Use the [PEAKING +/-] button to adjust the contour of the LCD monitor. (The contour of the viewfinder screen will also be adjusted at the same time.) 0 The [+] button increases contour correction and the [-] button decreases contour correction. 0 Press the [+] and [-] buttons simultaneously to return to standard settings. 0 During adjustment, the contour level is displayed on the LCD monitor. PEAKING 4030 20 10 0 0 P13000K ND 1 /64 AE+6 0dB F1. 6 1/ 100 . Adjusting the Contrast Use the [LCD Contrast] menu to adjust the contrast of the LCD monitor. 0 Adjust using [Main Menu] B [LCD/VF] B [LCD Contrast]. 0 Increasing the value increases the contrast. [Setting Values: +10 to -10] (Default value: 0) Adjusting the Viewfinder You can change the brightness and peaking of the viewfinder screen according to your usage conditions. Changing the brightness of the screen will not affect the recorded images. 1 Caution : 0 A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the characteristic of the display device, colors may appear on the images when you blink your eyes. This is not a malfunction. It does not affect the recorded images, SDI output, AV output, or HDMI output. 1 Incline the viewfinder vertically to a position that enables easy viewing. 2 Turn the visibility adjustment lever to adjust the visibility. Turn the visibility adjustment lever to sharpen the image on the viewfinder screen. 3 Adjust the brightness, contour, and contrast of the viewfinder screen. Adjusting the Brightness Use the [VF Bright] menu to adjust the brightness of the viewfinder screen. 0 Adjust using [Main Menu] B [LCD/VF] B [VF Bright]. 0 Increasing the value increases the brightness. [Setting Values: +10 to -10] (Default value: 0) Adjusting the Contour Use the [PEAKING +/-] button to adjust the contour of the viewfinder screen. The contour of the LCD monitor will also be adjusted at the same time. (A P37 [Adjusting the Contour] ) Memo : 0 When [Main Menu] B [LCD/VF] B [LCD + VF] is set to "Off", operate after switching to the viewfinder display by pressing the [DISPLAY] button for 2 seconds or longer. PEAKING 2 . Adjusting the Contrast Use the [VF Contrast] menu to adjust the contrast of the viewfinder screen. 0 Adjust using [Main Menu] B [LCD/VF] B [VF Contrast]. 0 Increasing the value increases the contrast. [Setting Values: +10 to -10] (Default value: 0) 37
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/37.png)