JVC GY-HM620U Instruction Manual - Page 113
Audio Set Item, HDMI TC, SD Aspect, SD Set Up, Input1 Mic Ref., Int. Mic Gain, AUX Gain, Ref. Level
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
9 HDMI TC For setting whether to superimpose time code to the [HDMI] terminal. [Setting Values: On, ROff] Memo : 0 When [Main Menu] B [A/V Set] B [Video Set] B [HDMI/SDI Out] is set to "SDI", [HDMI TC] is fixed at "Off" and cannot be selected. 0 Set to "Off" if connecting to a device that does not support HDMI TC. SD Aspect For setting the style of displaying down-converted images on a 4:3 aspect ratio screen. 0 Side Cut: Displays image with the left and right sides cut off. 0 Letter: Displays as a wide image with the top and bottom blackened. 0 Squeeze: Displays image that is squeezed horizontally. [Setting Values: Side Cut, Letter, RSqueeze] Memo : 0 When [Record Format] B [System] is set to "SD" or "HD+SD", and when [SD Aspect] is set to "4:3", this item appears as "---" and cannot be selected. (A P117 [ System ] ) SD Set Up For selecting whether to add a setup signal to the video signal output from the [AV] output terminal. Setup signals are added when "7.5%" is selected. [Setting Values: 7.5%, 0.0%] (Default values: 7.5% (U model), fixed at "0.0%" (E model)) Memo : 0 Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at "0.0%". "0.0%" is displayed in gray in this case. Audio Set Item Input1 Mic Ref. For setting the reference input level when the [INPUT1] selection switch is set to "MIC" or "MIC +48V". [Setting Values: -62dB, -56dB, R-50dB, -44dB, -38dB, -32dB] Input2 Mic Ref. For setting the reference input level when the [INPUT2] selection switch is set to "MIC" or "MIC +48V". [Setting Values: -62dB, -56dB, R-50dB, -44dB, -38dB, -32dB] Int. Mic Gain For setting the sensitivity of the built-in microphone. [Setting Values: +12dB, +6dB, R0dB] AUX Gain For setting the sensitivity of the [AUX] terminal input. [Setting Values: +12dB, +6dB, R0dB] Ref. Level For setting the audio reference level to be recorded to the SD card. (Applies to both [CH1/CH2].) [Setting Values: -12dB, -18dB, R-20dB] Limiter For setting the limiter operation. 0 Ref. Level: Sets "Ref. Level" to the maximum recording level. 0 -8dBFS, -5dBFS: Sets "-8dBFS" or "-5dBFS" to the maximum recording level. 0 Off: Depending on the settings of the [CH1/CH2 AUTO/MANUAL] selection switches, the operation may be different as described below. 0 The limiter does not function when "MANUAL" is set. 0 The limiter functions at -5 dBFS when "AUTO" is set. [Setting Values: Ref. Level, -8dBFS, R-5dBFS, Off] AGC Response 9 Attack Time Sets the time to activate the limiter. [Setting Values: Fast, RMiddle, Slow] 9 Decay Time Sets the time to deactivate the limiter operation. [Setting Values: Fast, RMiddle, Slow] 113 Menu Display and Detailed Settings