JVC GY-HM620U Instruction Manual - Page 147
Connecting via SDI, Setting the Aspect, Connecting External Devices
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Audio (Lch) Video GND BATT.RELEASE A AUX P/OCWHGER Audio (Rch) DEVICE AV SD/HD B SDI HDMI REMOTE HOST DC INPUT2 INPUT1 DEVICE AV REC REMOTE DC HOST Connecting via SDI 0 Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the HD-SDI and SDSDI signals. 0 User's bit output from the [HD/SD SDI] output terminal is used as a flag to determine valid video signals. Therefore, accurate values will not be output. Memo : 0 The sampling frequency for embedded (superimposed) audio signals is 48 kHz. Time code of the built-in time generator as well as playback time code are also output. AV input HDMI SDI IN . * Select the output signal in [A/V Set] B [HDMI/SDI Out]. (A P112 [ HDMI/SDI Out ] ) * When [Record Format] B [System] is set to "SD", only SD-SDI signals are output. (A P117 [ System ] ) * To display the menu screen or display screen on an external monitor, set [A/V Set] B [Video Set] B [Display On TV] to "On". (A P112 [ Display On TV ] ) Setting the Aspect 0 For setting the mode to convert images with a 16:9 aspect ratio to display on a 4:3 aspect ratio screen. 0 Set using [A/V Set] B [Video Set] B [SD Aspect]. 0 The available modes include "Side Cut", "Letter" (blackened at the top and bottom), and "Squeeze" (full size, compressed at the left and right). (A P119 [ SD Aspect ] ) Memo : 0 When [Record Format] B [System] is set to "SD", and [SD Aspect] is set to "4:3", this item cannot be selected. (A P117 [ System ] ) (A P119 [ SD Aspect ] ) Connecting External Devices 147