JVC GY-HM620U Instruction Manual - Page 54
Adjusting the Iris, Manual Iris Manual Adjustment Mode, Auto Iris Automatic Adjustment Mode
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Shooting Adjusting the Iris You can adjust the aperture of the lens iris manually or automatically according to the brightness of the object. Auto Iris (Automatic Adjustment) Mode Press the [IRIS] button to set to the Auto Iris mode. The iris is automatically adjusted according to the brightness of the object. The a icon appears on the screen. 00: 00: 00.00 Jan 12, 2016 12 :34 :56 IRIS PUSH AUTO . Manual Iris (Manual Adjustment) Mode The aperture value (F-number) of the lens can be set manually. 1 Press the [IRIS] button to set to the Manual Iris mode. The a icon on the screen disappears. 2 Turn the iris ring on the lens to adjust the iris manually. The open F-number of the aperture varies according to the zoom position. Wide [W] end : F1.6 Tele [T] end : F3.0 F-number Description Decrease The subject appears brighter. The focused range becomes sharper, while the background is blurred to produce a soft image. Increase The subject appears darker. Background of image becomes focused as well. Memo : 0 Pressing the [PUSH AUTO] button during Manual Iris mode activates One Push Auto Iris mode. And holding down the [PUSH AUTO] button activates Push Auto Iris mode. 4030 20 10 0 P13000K 5.6f t ND 1 /64 AE+6 0dB F1. 6 1/ 100 . Memo : 0 Set the [FULL AUTO] switch on the camera recorder to "ON" to enter Auto Iris mode (automatic adjustment mode). The iris is automatically adjusted according to the brightness of the object. In this case, the [IRIS] switch on the camera recorder is disabled. 0 The iris open/close limit can be set in [Main Menu] B [Camera Function] B [Auto Iris Limit (OPEN)]/[Auto Iris Limit (CLOSE)] during Auto Iris. (A P99 [ Auto Iris Limit (OPEN) ] ) (A P99 [ Auto Iris Limit (CLOSE) ] ) 0 You can use the cross-shaped button (HI) on the side control panel to set the target level (brighter/darker) of the auto iris. (A P98 [ AE Level ] ) 0 The convergence speed of the auto iris can be set in the menu. (A P98 [ AE Speed ] ) One Push Auto Iris When the camera recorder is in Manual Iris mode, press the [PUSH AUTO] button to adjust the iris according to the brightness of the object. Push Auto Iris When the camera recorder is in Manual Iris mode, hold down the [PUSH AUTO] button to change to Auto Iris mode temporarily. The iris will be automatically adjusted according to the brightness of the object. About the Iris F-number Blurry effects due to "small aperture diffraction" may occur when the diameter of the iris becomes too small. When this phenomenon occurs, the Fnumber on the screen turns gray to warn you that the diffraction F-number of the iris has been exceeded. You are recommended to make appropriate use of ND filters to prevent the F-number from turning gray. 54
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/54.png)