JVC GY-HM620U Instruction Manual - Page 105
Detail/Adjust Item, Shooting Mode, Reset Process, V/H Balance, H Frequency
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Menu Display and Detailed Settings Shooting Mode For switching the settings for image recording on the camera. 0 Standard: Normal shooting mode. This setting is suitable for shooting low-noise image quality. Use this mode in well lit places. 0 Extended: High sensitivity shooting mode. This setting enables recording in various brightness conditions. Use this mode in places where the lighting is difficult to control and the brightness is insufficient. [Setting Values: RStandard, Extended] Reset Process Restores all items in the [Camera Process] menu to their default settings. Detail/Adjust Item V/H Balance For setting the H/V balance to enhance contour (detail) in the horizontal (H) or vertical (V) direction. 0 H+1 to H+4: Increasing the value enhances contour in the horizontal direction. 0 V+1 to V+4: Increasing the value enhances contour in the vertical direction. [Setting Values: H+1 to H+4, RNormal, V+1 to V+4] Memo : 0 When [System] under [Record Format] is set to "SD", this item is fixed at "Normal". 0 When [System] under [Record Format] is set to "HD+SD", this item can be set during HD recording, but will be fixed at "Normal" during SD recording. 0 When [System] under [Record Format] is set to "HD+SD", this item can be set during HD recording, but will be fixed at "Normal" during SD recording. a H Frequency For specifying the correction frequency of the horizontal contour. Set this according to the object. 0 High: Emphasizes the high frequency range. Use this when shooting objects with fine patterns. 0 Middle: Emphasizes the intermediate frequency range. 0 Low: Emphasizes the low frequency range. Use this when shooting objects with large patterns. [Setting Values: High, RMiddle, Low] Memo : 0 When [System] under [Record Format] is set to "SD", this item is fixed at "Low". 0 When [System] under [Record Format] is set to "HD+SD", this item can be set during HD recording, but will be fixed at "Low" during SD recording. a V Frequency For specifying the correction frequency of the vertical contour. Set this according to the object. 0 Low: Emphasizes the low frequency range. 0 Middle: Emphasizes the intermediate frequency range. 0 High: Emphasizes the high frequency range. [Setting Values: Low, RMiddle, High] Memo : 0 When [System] under [Record Format] is set to "SD", this item is fixed at "Low". (A P117 [ Record Format ] ) 0 When [System] under [Record Format] is set to "HD+SD", this item can be set during HD recording, but will be fixed at "Low" during SD recording. a 0 "High" cannot be selected under the following settings. 0 When [WResolution] is set to "1920x1080", and [WFrame & Bit Rate] is set to "60i" or "50i" 0 When [WResolution] is set to "1440x1080", and [WFrame & Bit Rate] is set to "60i" or "50i" 105
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/105.png)