JVC GY-HM620U Instruction Manual - Page 117
Record Set Item, Date/Time, Time Zone, Reserved, Reserved 1 to Reserved 16, System Information
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Menu Display and Detailed Settings Date/Time For setting the year, month, day, hour, and minute. Memo : 0 If the signal reception for GPS satellites allows date and time to be set based on the GPS information, you can set the time obtained from the GPS satellite by pressing the [FOCUS ASSIST/1] button. The [FOCUS ASSIST/1] button is grayed out if information for setting the date and time cannot be acquired from the GPS satellite. a 0 The display order of the date (year, month, day) follows the setting in [Display Settings] B [Date Style]. However, the 24-hour format is used for the hour display regardless of the [Time Style] setting. (A P111 [ Date Style ] ) Time Zone For setting the UTC time difference in units of 30 minutes. [Setting Values: UTC-00:30-UTC-12:00, UTC, UTC+14:00-UTC+00:30 (in 30 min increments)] (Default values: UTC-05:00 (U model), UTC (E model)) Memo : 0 If [Date/Time] is already set, the [Date/Time] item is automatically adjusted when [Time Zone] is altered. Reserved For setting the additional function to "On" or "Off". 9 Reserved 1 to Reserved 16 Normally set to "Off". [Setting Values: On, ROff] System Information 9 Version Displays information on the firmware version. 9 Fan Hour For displaying the usage time of the internal fan. Memo : 0 Under normal environment, dust will accumulate on the internal fan when the camera recorder is used over a long period. Dust may enter the camera recorder especially if it is used outdoors. This may affect the image and sound quality of the camera recorder. Check and replace the fan after every 9000 hours (suggested guideline). 9 Open Source License Displays the license for the open source software used by this camera recorder. Record Set Item Record Format After setting of all items in the [Record Format] menu is complete, select [Set] at the bottom of the screen to apply the new settings on the camera recorder and switch the recording format. A "Please Wait..." message appears during switching. 9 System For selecting a system definition. 0 HD: Records in "HD" (high definition) quality 0 SD: Records in "SD" (standard definition) quality 0 HD+SD a: Records in "HD" (high definition) for slot A, and in "SD" (standard definition) for slot B. 0 HD+Web a: Records in "HD" (high definition) for slot A, and in low definition for slot B. [Setting Values: RHD, SD, HD+SD, HD+Web] Caution : 0 The setting value options for each of the following item vary depending on the setting of this item. a : [WFormat], [WResolution], [WFrame & Bit Rate] b : [Format], [Resolution], [Frame & Bit Rate] 117
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/117.png)