JVC GY-HM620U Instruction Manual - Page 182
Warning Tone, Troubleshooting
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Warning Tone 0 Warning tone is output from the monitor speaker and [x] terminal when the battery level is low. 0 Warning tone is also output when an error occurs in the camera recorder. Memo : 0 You can specify whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio Set] B [Alarm Level]. (A P115 [ Alarm Level ] ) Troubleshooting Symptom Action Power does not turn on. 0 Is the AC adapter properly connected? 0 Is the battery charged? 0 Is the power turned on immediately after it is turned off? Make sure to wait for an interval of at least 5 seconds before turning on the power again. Unable to start recording. 0 Is the record trigger button/lock switch on the handle turned on? 0 Is the write-protect switch of the SD card turned on? Make sure that the write-protect switch is turned off. (A P39 [Write-Protect Switch on the SD Card] ) 0 Is the camera recorder set to the Camera mode? Use the [MODE] selection button to switch to the Camera mode. (A P18 [Operation Modes] ) 0 Is the SD card inserted compatible with the recording format? (A P46 [Selecting a Video Format] ) (A P121 [ 4GB File Spanning(SDXC) ] ) Camera image is not output on 0 Is the camera recorder set to the Camera mode? the LCD monitor and Use the [MODE] selection button to switch to the Camera mode. viewfinder screen. (A P18 [Operation Modes] ) Playback does not start after 0 Is the selected clip a playable clip? selecting a clip thumbnail and Playback is not possible if the clip has a different video format setting. pressing the Set button (R). No sound during playback. 0 Is the currently played clip recorded in the Variable Frame Rec mode? (A P84 [Variable Frame Rec] ) Images on the LCD monitor 0 Readjust the brightness of the LCD monitor and viewfinder. and viewfinder screen appear 0 Is the [ND FILTER] switch set to "1/64"? dark or blurred. 0 Is the iris closed? 0 Is the shutter speed setting too high? 0 Is the amount of peaking too little? Use the [PEAKING +/-] button to adjust the contour for the LCD monitor and the viewfinder screen. (A P36 [Adjusting the LCD Monitor] ) (A P37 [Adjusting the Viewfinder] ) The [CH1/CH2] recording level 0 Is the [CH1/CH2 AUTO/MANUAL] switch set to "AUTO"? adjustment knob does not 0 Is the [FULL AUTO] switch set to "ON"? work. Is the [FULL AUTO] switch set to "ON", and [A/V Set] B [Audio Set] B [Audio On FULL AUTO] set to "Auto"? (A P115 [ Audio On FULL AUTO ] ) SD card cannot be initialized 0 Is the write-protect switch of the SD card turned on? (formatted). Make sure that the write-protect switch is turned off. (A P39 [Write-Protect Switch on the SD Card] ) Battery alarm appears even 0 Is the battery too old? after loading a charged battery. Others 182