JVC GY-HM620U Instruction Manual - Page 88
Playing back, Audio Output during Playback
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Playback Memo : 0 The object of action is the clip of the current slot being displayed. 0 [Selected Clips] cannot be performed if there are no selected (appended with check mark) clips. 0 [This Clip] cannot be performed if there are more than one selected (appended with check mark) clips. 0 If the write-protect switch of an SD card is set, OK mark cannot be appended or deleted, and the clips cannot be deleted. Playing back Use the operation buttons on the side control panel of the camera recorder to play back. MENU/THUMB AE LEVEL CANCEL A B C . A IW Button 0 Plays back/pauses the clip pointed by the cursor. 0 You can press the cross-shaped button (HI) to perform frame-by-frame forward playback during pause mode. B S/T Button Skips in the reverse or forward direction. O/N Button During Playback: Fast forwards in the reverse or forward direction. While paused: Frame-by-frame playback in the reverse or forward direction. C o Button Stops playback. 1 In the thumbnail screen, move the cursor to the clip to be played back. Move the cursor to the clip to be played back using the cross-shaped button (JKH I). 2 Press the playback/pause button. Playback of the selected clip starts. Audio Output during Playback 0 You can confirm the playback sound from the monitor speaker, or the headphone connected to the [x] terminal. When a headphone is connected to the [x] terminal, sound cannot be output from the monitor speaker. (A P148 [Connecting the Headphone] ) 0 Adjust the volume of the monitor speaker and headphone using the [MONITOR +/-] volume adjustment button on the LCD monitor section of the camera recorder. Time Code Playback Time code or user's bit recorded on an SD card can be displayed on the LCD monitor and viewfinder. Memo : 0 The time code is also superimposed on the video signal output from the [HD/SD SDI] output terminal. 0 User's bit output from the [HD/SD SDI] output terminal is used as a flag to determine valid video signals. Therefore, accurate values will not be output. 0 If a section without time code is played back, the time code will stop. However, playback will continue. Displaying Information during Shooting During playback, pressing the [DISPLAY] button shows the display screen. Pressing the [AE LOCK/4] button switches the display information during shooting between no display, camera information display, and GPS display. 0 The GPS display displays information on the recording location of the video being played back only when GPS information has been recorded. The local date/time is displayed. 0 Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded. Hide AE LOCK/4 . AE LOCK/4 0dB F1. 6 1/ 100 P13000K Camera Information Display AE LOCK/4 +35.483197 +139.652172 Oct 30,2016 07:01:58PM GPS Display 88
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/88.png)