JVC GY-HM620U Instruction Manual - Page 98
Camera Function Menu
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Menu Display and Detailed Settings Camera Function Menu Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode. Bars For setting whether to output color bars. [Setting Values: On, ROff] Memo : 0 The audio test signals (1 kHz) can be output simultaneously with the color bar output. (A P114 [ Test Tone ] ) OIS For setting whether to enable image stabilizer. When "On" is selected, set the Level. [Setting Values: On, ROff] 9 Level For setting the level of the image stabilizer. [Setting Values: High, RNormal] Memo : 0 When "High" is selected, correcting severe camera shake may cause the area surrounding the image to darken. Flicker Correction For setting whether to adjust image flicker that occurs under a fluorescent light. [Setting Values: On, ROff] Flash Band Correction For reducing the condition of the flash band phenomenon, which creates an unnatural image with a part of it brightly lit, such as by the camera flash of another still camera. [Setting Values: On, ROff] Caution : 0 Flash band correction function is not available in any of the following cases. 0 When [Rec Mode] is set to "Variable Frame" 0 When [WFrame & Bit Rate]/[YFrame & Bit Rate] is set to "24p" 0 When in the Automatic Shutter mode or when the shutter is turned on in the Manual Shutter mode (A P56 [Manual Shutter Mode (Manual Shutter Switching)] ) 0 When [Network] is set to "On(SDI Off)" or "On(HDMI Off)" 0 [Flash Band Correction] operates when the luminance of the screen varies widely, with or without flash light. However, depending on the shooting condition, the flash band correction may not be fully effective even if there are flash lights. 0 The following symptoms may occur under flash light, but these are not malfunctions due to flash band correction. 0 Moving object appears to be stationary momentarily. 0 A horizontal line appears on the image. 0 The [Flash Band Correction] function will be set to "Off" if the camera recorder switches from the Camera mode to another mode, or when the [POWER ON/OFF(CHG)] switch is set to "OFF(CHG)". Shutter For specifying shutter-related settings. Use this item to set to "Step" (fixed value) or "Variable" when operating with the cross-shaped button (JK) on the right side. 0 Variable: Sets to variable scan. Use this setting such as when shooting a PC monitor. 0 Step: Sets to step shutter, which switches the shutter speed by a fixed value. [Setting Values: Variable, RStep] AE Level For setting the convergence level during AE (Auto Exposure). This can also be adjusted using the cross-shaped button (HI) on the right side. [Setting Values: -6 to +6 (R0)] AE Speed For setting the convergence speed during AE (Auto Exposure). [Setting Values: RFast, Middle, Slow] 98