JVC GY-HM620U Instruction Manual - Page 167
Registering/Deleting Preset Zoom, Set to the Register Preset Zoom mode.
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Registering/Deleting Preset Zoom Registering Preset Zoom You can register any 3 zoom positions. 1 Set to the Register Preset Zoom mode. Tap (click) the [Preset] button to switch to the Register Preset Zoom mode. HM660 01:12:54.19 Z 00 4 In the same way, register [B] and [C]. After all three positions A, B and C are registered, the positions of the [A], [B], and [C] buttons will be rearranged according to the order of the registered zoom position from the left. HM660 01:12:54.19 Z 00 26min 50min STBY 282min 26min 50min STBY 282min . 2 Determine the zoom position. Use the zoom control to operate the zoom and determine a position. 3 Tap (click) [A]. Position [A] is registered, and position A is displayed on the sliding bar of the zoom control. HM660 01:12:54.19 Z 00 . 5 Exit the Register Preset Zoom mode. Tap (click) the [Preset] button to exit the Register Preset Zoom mode. Memo : 0 After registration is complete ([A], [B], and [C] buttons are all active), tapping (clicking) each button switches to the corresponding preset zoom position. 0 This function operates independently of the preset zoom position on the camera recorder. (A P49 [Saving/Recalling Current Zoom Position (Preset Zoom)] ) 26min 50min STBY 282min . Connecting to the Network a 167
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/167.png)