JVC GY-HM620U Instruction Manual - Page 123
Live Streaming, Server, Streaming Server, Server1/Server2/Server3/Server4, TS/TCP, MPEG2-TS/RTP
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Menu Display and Detailed Settings 9 Live Streaming Starts live distribution when "On" is selected. [Setting Values: On, ROff] Memo : 0 "On" cannot be selected if network connection is not established. 0 "On" cannot be selected when FTP is running. 0 Live streaming switches to "Off" when the power is turned off. 9 Server For selecting the server for live streaming. [Setting Values: RServer1, Server2, Server3, Server4] Memo : 0 The setting cannot be changed during live streaming (Live Streaming set to "On"). 9 Streaming Server For setting the server for live streaming. Memo : 0 The setting cannot be changed during live streaming (Live Streaming set to "On"). 9 Server1/Server2/Server3/Server4 o Alias For setting a name to distinguish the settings of this camera recorder. The name set in this item will be displayed in the [Server] options. * The default value is "Server1/Server2/Server3/ Server4". * You can enter up to 31 characters and ASCII characters. o Type For setting the system to transfer videos for distribution. [Setting Values: RMPEG2-TS/UDP, MPEG2TS/TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI, RTMP] Memo : 0 Use reception devices that are compatible with the respective transfer systems. 0 To use the "ZIXI" setting, a dedicated server is needed separately. 0 The following items that can be set vary depending on the setting of this item. o Destination Address For setting details such as the host name and the IP address of the live distribution destination. * Enter not more than 127 characters using singlebyte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.]. o Destination URL For entering the URL of the live distribution destination beginning with "rtmp://". There is no default value (blank). * You can enter up to 191 characters and ASCII characters. o Destination Port Enter the network port number of the live distribution destination using an integer between 1 and 65535. When [Type] is set to "MPEG2-TS/UDP", "MPEG2-TS/TCP" or "MPEG2-TS/RTP", the default value is "6504". If "ZIXI" is set, the default value is "2088". Memo : 0 When [Type] is set to "MPEG2-TS/RTP", only even numbers from 2 to 65530 can be specified for the port number. 0 When [Type] is set to "MPEG2-TS/RTP" and [SMPTE 2022-1 FEC] is set to "On", N+2 and N +4 port numbers are also used in addition to the specified port number (N). o Stream ID For setting the registered stream ID of the live distribution destination. The default value varies with the product model. * Enter not more than 63 characters. o Stream Key Enter the stream key specified at the live transmission destination. There is no default value (blank). * Enter not more than 63 characters. o Password For setting the [Stream ID] password. There is no default value (blank). * Enter not more than 127 characters. When [Type] is set to "RTSP/RTP", enter not more than 31 characters. o Latency For setting the latency mode. [Setting Values: High, Medium, RLow, Minimun(ZIXI Off)] 123
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/123.png)