JVC GY-HM620U Instruction Manual - Page 65
Monitoring Audio Sound During Recording Using a Headphone
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Shooting o Setting Input Channel to "INT" for Both [CH1] and [CH2] 1 Set the [CH1 AUTO/MANUAL] selection switch to "MANUAL". 2 Turn the [CH1] recording level adjustment knob to adjust the level. When the built-in microphone and the [AUX] input terminal are used, the recording levels of [CH1] and [CH2] are interlocked. This is also effective when the [CH1 AUTO/ MANUAL] selection switch is set to [CH2]. Memo : 0 Select [Limiter], [AGC Response], [AGC Mode], or [Int. Mic Separation] in the menu to set the recording audio. 0 If [Limiter] is set to other than "Off", the limiter operates according to the value set. (A P113 [ Limiter ] ) 0 For the reference level to be recorded to an SD card, set [Main Menu] B [A/V Set] B [Audio Set] B [Ref. Level] to "-20dB", "-18dB", or "-12dB". (common for CH1/CH2) (A P113 [ Ref. Level ] ) 0 The operations of the [CH2] recording level adjustment knob and [CH2 AUTO/MANUAL] selection switch are disabled. Automatic Adjustment Mode 0 Set the [CH1/CH2 AUTO/MANUAL] selection switch to "AUTO" or the [FULL AUTO] switch to "ON" to enter Automatic Adjustment mode. The audio recording level is set automatically according to the input level. 0 When the [FULL AUTO] switch is set to "ON", mode switching with the [CH1/CH2 AUTO/ MANUAL] selection switch is disabled. Memo : 0 When [Main Menu] B [A/V Set] B [Audio Set] B [Limiter] is set to "Off" while in the automatic adjustment mode, the limiter operates at -5 dBFS. 0 If [Limiter] is set to other than "Off", the limiter operates according to the value set. (A P113 [ Limiter ] ) 0 When [A/V Set] B [Audio Set] B [Audio On FULL AUTO] is set to "SW Set", you can switch the audio recording mode with the [CH1/CH2 AUTO/MANUAL] selection switch on the camera recorder even if the [FULL AUTO] switch is set to "ON". (A P115 [ Audio On FULL AUTO ] ) Monitoring Audio Sound During Recording Using a Headphone You can check the recorded audio using headphone. 1 AUX 23 MONITOR CH1 BOTH CH2 . 1 Connect the headphone. 2 Select the channel to monitor with the [MONITOR] selection switch. Setting Description [CH1] Outputs the audio recorded in [CH1]. [BOTH] Outputs the audio recorded in [CH1/CH2]. [CH2] Outputs the audio recorded in [CH2]. 3 Use the [MONITOR +/-] button to adjust the monitor volume. Memo : 0 Audio during recording is not output from the monitor speaker. 0 Warning tone is output when there is an abnormality in the camera recorder or when the battery is low. (A P182 [Warning Tone] ) Selecting Audio Output Method When the [MONITOR] Selection Switch Is Set to "BOTH" When a stereo type earphone jack is connected, perform the following setting to output stereo sound. 1 Set the [MONITOR] selection switch to "BOTH". 2 Set [Main Menu] B [A/V Set] B [Audio Set] B [Monitor] to "Stereo". (A P115 [ Monitor ] ) Memo : 0 You can set the volume of the warning tone in [Main Menu] B [A/V Set] B [Audio Set] B [Alarm Level]. ("Off"/"Low"/"Middle"/"High") (A P115 [ Alarm Level ] ) 65