JVC GY-HM620U Instruction Manual - Page 68
Setting Time Code without Opening the, Press the [MENU/THUMB] button.
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Shooting 1 Select [Main Menu] B [TC/UB] B [TC Preset] and press the Set button (R). (A P107 [ TC Preset ] ) The [TC Preset] screen appears. Setting Time Code without Opening the Menu MENU/THUMB CANCEL 1 MENU/THUMB AE LEVEL . Memo : 0 When [TC/UB] B [TC Generator] is set to "Regen", the parameter is displayed as "Regen" and cannot be selected. (A P107 [ TC Generator ] ) 2 Set the time code (hour, minute, second, frame). Use the cross-shaped button (HI) to place the cursor at the item to set, then use the crossshaped button (JK) to change the values. Cursor During non-drop During drop frame frame . Memo : 0 Press the [OIS/2] button to reset each digit to "0". The cursor moves to the time digit (left). CANCEL FOCUS ASSIST/1 OIS / 2 TIME CODE . Memo : 0 Settings cannot be made in the following cases. 0 [TC/UB] B [TC Generator] has been set to "Regen". 0 Menu screen is displayed. 0 The camera recorder is not in the Camera mode. Setting Time Code 1 Set [TC/UB] B [TC Generator] to settings other than "Regen". (A P107 [ TC Generator ] ) 2 Hold down the [MENU/THUMB] button and press the [FOCUS ASSIST/1] button. The [TC Preset] setting screen appears. Cursor 3 Check the values and press the Set button (R). 0 The time code is set and the screen returns to [TC/UB]. 0 To cancel the setting, press the [CANCEL] button. 4 Press the [MENU/THUMB] button. Returns to the normal screen. During drop frame During non-drop frame . 3 Set the time code (hour, minute, second, frame). Use the cross-shaped button (HI) to place the cursor at the item to set, then use the crossshaped button (JK) to change the values. Memo : 0 Press the [OIS/2] button to reset each digit to "0". The cursor moves to the time digit (left). 68