JVC GY-HM620U Instruction Manual - Page 70
Synchronizing Time Code on Another Camera
![]() |
View all JVC GY-HM620U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Shooting 1 Set [Main Menu] B [TC/UB] B [UB Mode] to "Preset", and press the Set button (R). (A P107 [ UB Mode ] ) The [UB Mode] setting screen appears. 1 . Memo : 0 When [TC/UB] B [TC Generator] is set to "Regen", the parameter is displayed as "Regen" and cannot be selected. (A P107 [ TC Generator ] ) 2 Select [Main Menu] B [TC/UB] B "Preset" and press the Set button (R). The [Preset] setting screen appears. 3 Use the cross-shaped button (HI) to place the cursor at the item to set, then use the cross-shaped button (JK) to change the values. Numbers between 0 and 9 or alphabets between A and F can be specified for the user's bit. Cursor Synchronizing Time Code on Another Camera This camera recorder is equipped with a time code input/output terminal ([TC] terminal). Connect another camera recorder to the [TC] terminal and synchronize to the time code. 1 Connect the [TC] terminal of the master device with the [TC] terminal of the slave device. Set the [TC IN/OUT] switch of the master device to "OUT", and the [TC IN/OUT] switch of the slave device to "IN". Master Device INPUT2 INPUT1 BATT.RELEASE A AUX P/OCWHGER REC DEVICE AV HD/SD B SDI HDMI REMOTE DC HOST [OUT] IN OUT TC Slave Device (This Camera Recorder) INPUT2 INPUT1 BATT.RELEASE A AUX P/OCWHGER REC DEVICE AV HD/SD B SDI HDMI REMOTE DC HOST . [IN] IN OUT TC . Memo : 0 Press the [OIS/2] button to reset each digit to "0". The cursor moves to the left. 4 Check the values and press the Set button (R). 0 The user's bit is set and the screen returns to [TC/UB]. 0 To cancel the setting, press the [CANCEL] button. 5 Press the [MENU/THUMB] button. Returns to the normal screen. 70
![](/manual_guide/products/jvc-gyhm620u-instruction-manual-34f6e79/70.png)