JVC GY-HM620U Instruction Manual - Page 44

Preparations Operation Lock Feature You can use this feature to prevent erroneous camera operation. MENU/THUMB CANCEL MENU/THUMB AE LEVEL CANCEL . 1 While in the Camera mode (when the display screen appears), press and hold the [CANCEL] button for 5 seconds or longer. 0 The operation lock turns on, and an operation lock icon (r) appears on the display screen. 00: 00: 00.00 Operation lock does not apply to the following buttons and switches. 0 [POWER ON/OFF(CHG)] switch 0 [ND FILTER] switch 0 TC [IN/OUT] selection switch 0 All switches inside the LCD monitor door (however, the operation of the [CH1/CH2] adjustment knob will be locked.) 0 Focus ring 0 Zoom lever at the grip/Zoom lever at the handle/ Zoom ring at the lens section 0 [ZOOM SERVO/MANUAL] switch 0 [FIX/VAR/OFF] zoom speed switch 0 Iris ring 0 [REC] button (at the top of the handle, on the grip and at the bottom of the lens) Memo : 0 The operation lock will also not apply to the [REC] button at the bottom of the lens if [Camera Function] B [User Switch Set] B [Front REC] is set to "Rec". ND 1 /64 AE+6 0dB 4030 20 10 0 P 13000K F1. 6 1/ 100 . 0 Press the [CANCEL] button again for 5 seconds or longer to turn off the operation lock. Memo : 0 The operation lock feature is only valid in the Camera mode. (A P18 [Operation Modes] ) 0 The power turns off and the operation lock is disengaged. 0 The [CANCEL] button on the LCD monitor section cannot be used to turn on/off ("On/Off") the operation lock feature. 0 The following remote operations are possible even when the operation lock feature is turned on ("On"). 0 Remote operation from the wired remote control connected to the [REMOTE] terminal. 0 Remote operation of the camera through access via a browser on devices such as a smartphone, tablet terminal, or PC. 44