Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 119
Loading Paper in the Multi Purpose Tray, Open the multi purpose tray.
View all Kyocera ECOSYS M3550idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Preparation before Use > Loading Paper Loading Paper in the Multi Purpose Tray The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m2). For details of the supported paper sizes, refer to Choosing the Appropriate Paper on page 11-16. For the paper type setting, refer to Media Type Setting on page 8-14. Be sure to use the multi purpose tray when you print on any special paper. IMPORTANT If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. The capacity of the multi purpose tray is as follows. • Plain paper (80 g/m2), recycled paper or color paper: 100 sheets • Thick paper (106 to 220 g/m2): 5 sheets • Hagaki: 1 sheet • Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9), Envelope #6 (Commercial #6), Envelope Monarch, Youkei 4, Youkei 2: 5 sheets • OHP film: 1 sheet NOTE • When you load custom size paper, enter the paper size by referring to Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 3-23. • When you use special paper such as transparencies or thick paper, select the media type by referring to Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 3-23. 1 Open the multi purpose tray. 2 Pull out the support tray section of the MP tray. 3-18