Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 83
Accessing Command Center RX, Display the screen.
View all Kyocera ECOSYS M3550idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Installing and Setting up the Machine > Command Center RX Accessing Command Center RX 1 Display the screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Press [Device Information] in the home screen and then [Identification/Network] to check the machine's IP address and the host name. Device Information Identification/Network Examples: https://192.168.48.21/ (for IP address) https://MFP001 (if the host name is "MFP001") The web page displays basic information about the machine and Command Center RX as well as their current status. NOTE • If the screen "There is a problem with this website's security certificate." is displayed, configure the certificate. For details on Certificates, refer to the Command Center RX User Guide. • You can also continue the operation without configuring the certificate. 2-35