Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 237

Using Various Functions > Functions File Name Entry Copy Print from Box Send Scan to USB Adds a file name. Additional information such as job number and date and time can also be set. You can check a job history or job status using the file name, date and time, or job number specified here. Enter the file name (up to 32 characters), and press [Next]. To add date and time, press [Date and Time]. To add job number, press [Job No.]. To add both, select [Job No. + Date] or [Date + Job No.]. Priority Override Copy Print from Box Print from USB Suspends the current job and gives a new job top priority. The suspended job resumes after the other job is finished. (Value: [Off] / [On]) NOTE • This function is not available if current job was an override. • Priority override may not be available depending on the status of the current print job and memory usage. Quiet Mode Copy Print from Box Print from USB Send Scan to USB Lower print and scan speed for quiet processing. Select this mode when the running noise is uncomfortable. It is possible to set the use of Quiet Mode for each function, such as copying and sending. (Value: [Off] / [On]) NOTE • The processing speed will be slower than normal when in Quiet Mode. • This cannot be used when [Prohibit] is set for Specify for Each Job on page 8-40. 6-21