Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 313

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration To change the user information of logged in user (User Property) These users can partially change their own user properties including user name, login password, E-mail address, and Simple Login. Although "Login User Name", "Access Level", or "Account Name" cannot be changed, the users can check the present status. 1 Display the screen. 1 Press the [System Menu/Counter] key. 2 Press [ ] and then [User Property]. 2 Change the user properties. 1 Refer to step 3 of Adding a User (Local User List) to change a user property. System Menu/Counter. User:User A User Name User A Login User Name Login Password Account Name User A ********** Others 10:10 1/2 Cancel Save Item User Name Login User Name Login Password Access Level Account Name E-mail Address ID Card Information Description Changes the name shown on the user list. Up to 32 characters can be entered. Displays the login user name that is entered at login. Changes the password that is entered at login. Up to 64 characters can be entered. Displays the user's access level. Displays the account where the user belongs. Changes the user's e-mail address. Up to 128 characters can be entered. If you log in as a user and [New Destination Entry] is set to [Prohibit], you can only check the e-mail address. Displays the ID card information of the logged in user. NOTE This function is displayed when the optional ID Card Authentication Kit is activated. Card Authentication Kit(B) "Card Authentication Kit" (page 11-3) This function does not appear when the server type is set to [Ext.] in Network Authentication, and logged in with the user account certificated in the server specified as the [Ext.] server type. 9-11