Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 365
System Menu/Counter, Set [Prevent Bleed-through] to [On].
View all Kyocera ECOSYS M3550idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
Troubleshooting > Troubleshooting Symptom Irregular horizontal lines ― appear in the image. Checkpoints The altitude is 1500 m or ― higher and irregular horizontal white lines appear in the image. The altitude is 1500 m or ― higher and dots appear in the image. Print on the back of the ― sheet is visible on the front. Corrective Actions Reference Page Press the [System Menu/Counter] key, ― [Adjustment/Maintenance], [Service Setting], [MC] and decrease the adjustment value. Decrease the adjustment value 1 level at a time from the current value. If there is no improvement after the value is decreased by 1 level, decrease by 1 level again. If there is still no improvement, return the setting to the original value. Press the [System Menu/Counter] key, ― [Adjustment/Maintenance], [Service Setting], [Altitude Adjustment] and then select [High 1]. If there is still no improvement, change the value to [High 2]. Press the [System Menu/Counter] key, ― [Adjustment/Maintenance], [Service Setting], [Altitude Adjustment] and then select [High 1]. If there is still no improvement, change the value to [High 2]. Set [Prevent Bleed-through] to [On]. page 6-14 page 8-16 The previous image remains ― and lightly printed. Press the [System Menu/Counter] key, ― [Adjustment/Maintenance], [Service Setting], [MC] and increase the adjustment value. Increase the adjustment value 1 level at a time from the current value. If there is no improvement after the value is increased by 1 level, increase by 1 level again. If there is still no improvement, return the setting to the original value. 10-13