Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 199
Scanning using TWAIN, Display the screen., Con the scan settings.
View all Kyocera ECOSYS M3550idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Operation on the Machine > Sending Scanning using TWAIN This section explains how to scan an original using TWAIN. The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same way. 1 Display the screen. 1 Activate the TWAIN compatible application software. 2 Select the machine using the application and display the TWAIN dialog box. NOTE For selecting the machine, see the Operation Guide or Help for each application software. 2 Configure the scan settings. Select scanning settings in the TWAIN dialog box that opens. The settings that appear in the TWAIN dialog box are as follows. Basic Item Original Size Feed Method Original Orientation Sending Size Detail This setting sets the size of the scan area. The available sizes vary based on the scanner model and the size of the original. This setting specifies the feed method of the original. Select the feed method from the list. This setting specifies the orientation of the original. This setting specifies the image size. The available sizes vary based on the scanner model and the scan area selected in the preview panel. 5-37