Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 288
System/Network, Network
View all Kyocera ECOSYS M3550idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
Setup and Registration (System Menu) > System Menu System/Network Configures machine system settings. Network System/Network Network Configures network settings. Host Name Item Host Name Description Check the host name of the machine. Host name can be changed from Command Center RX. Changing Device Information (page 2-39) TCP/IP TCP/IP Item IPv4 Settings DHCP Auto-IP IP Address Subnet Mask Default Gateway Description Set up TCP/IP to connect to the Windows network. Value: Off, On Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to [On]. Select whether or not to use the DHCP (IPv4) server. Value: Off, On Select whether to use Auto-IP. Value: Off, On Set the IP addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP subnet masks. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. Set the IP gateway addresses. Value NOTE When DHCP is set to [On], this function will be grayed out and the value cannot be entered. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-27