Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 89
E-mail Settings
View all Kyocera ECOSYS M3550idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Installing and Setting up the Machine > Command Center RX E-mail Settings By configuring the SMTP settings, it is possible to send the images scanned by the machine as E-mail attachments and to send E-mail notices when jobs have been completed. To use this function, this machine must be connected to a mail server using the SMTP protocol. In addition, configure the following. • SMTP settings Item: "SMTP Protocol" and "SMTP Server Name" in "SMTP" • The sender address when the machine sends E-mails Item: "Sender Address" in "E-mail Send Settings" • The setting to limit the size of E-mails Item: "E-mail Size Limit" in "E-mail Send Settings" The procedure for specifying the SMTP settings is explained below. 1 Display the screen. Display the SMTP Protocol screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Press [Device Information] in the home screen and then [Identification/Network] to check the machine's IP address or the host name. Device Information Identification/Network 3 Log in with administrator privileges. The factory default setting for the default user with administrator privileges is shown below. Login User Name Login Password Admin Admin * Upper case and lower case letters are distinguished (case sensitive). 2-41