Kyocera ECOSYS M3550idn ECOSYS M3040idn/M3540idn/M3550idn/M3560idn Operation G - Page 397

Appendix > Character Entry Method Character Entry Method To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below. NOTE Keyboard Layout "QWERTY", "QWERTZ" and "AZERTY" are available as keyboard layouts the same as a PC keyboard. Press the [System Menu/Counter] key, [Common Settings] and then [[Keyboard Layout] to choose the desired layout. "QWERTY" layout is used here as an example. You may use another layout following the same steps. Entry Screens Lower-case Letter Entry Screen 3 4 5 67 1 Add - Name Abc ABC A/a Input: 3 Limit: 32 Del. qwe r t yu i o p 2 asdfghj k l 8 @z x c v bnm. 9 Cancel < Back Next > 10 11 12 No. Display/Key 1 Display 2 Keyboard 3 [ABC] / [Symbol] 4 [A/a] / [a/A] 5 Cursor Key 6 [Input] / [Limit] Display 7 Delete Key 8 Space Key 9 Enter Key 10 [Cancel] 11 [< Back] 12 [OK] / [Next >] Description Displays entered characters. Press the character to enter. Select the characters that are entered. To enter symbols or numbers, select [Symbol]. Press to switch between upper case and lower case. Press to move the cursor on the display. Displays maximum number of characters and the number of characters entered. Press to delete a character to the left of the cursor. Press to insert a space. Press to enter a line break. Press to cancel entered characters and return to the screen before the entry was made. Press to return to the previous screen. Press to save the entered characters and move to the next screen. 11-12