Netgear FS728TLP Web Management User Guide - Page 183
The rule is added to the Source MAC Address Rules Table or Destination MAC Address
View all Netgear FS728TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches Settings Description Source MAC or Destination MAC Depending on the type of link that you selected on the ACL Wizard screen, specify the MAC address of either the source device or destination device that needs to be compared against the MAC address in a packet. Enter a MAC address in the xx:xx:xx:xx:xx:xx format. Source MAC Mask or Destination MAC Mask Depending on the type of link that you selected on the ACL Wizard screen, specify the MAC mask that is associated with the source or destination MAC address. The MAC mask specifies which bits in the MAC address need to be compared against the information in a packet. Note: Use Fs and zeros in the MAC mask. An F means that the bit is not checked, and a zero in a bit position means that the data needs to be equal to the value given for that bit. For example, if the MAC address is aa:bb:cc:dd:ee:ff, and the MAC mask is ff:ff:00:00:00:00, all MAC addresses with xx:xx:cc:dd:ee:ff (in which x is any hexadecimal number) result in a match. 8. Click the Add button. The rule is added to the Source MAC Address Rules Table or Destination MAC Address Table. 9. Click the Apply button. The settings are saved, and the MAC Binding Configuration screen displays. 10. From the ACL ID menu, select the MAC ACL to which you want to bind ports, LAGs, or both. Note: The Direction menu is fixed at Inbound. Only incoming packets can be filtered. Manage Access Control Lists 183