Netgear FS728TLP Web Management User Guide - Page 210
Create a Rule for a Basic IP ACL, Security > ACL > Advanced > IP Rules
View all Netgear FS728TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches Create a Rule for a Basic IP ACL To create a rule for a basic IP ACL: 1. Select Security > ACL > Advanced > IP Rules. The IP Rules screen displays. The following figure shows two entries in the table as an example. 2. From the ACL ID menu, select the ACL ID that you have defined on the IP ACL screen (see Manage IP ACL Identifiers on page 208) and for which you want to add a rule. The rule that you are creating applies to the selected basic IP ACL only. 3. Configure the settings as described in the following table: Settings Rule ID Action Assign Queue ID Description The ID for the rule. Enter a number from 1 to 10. You can create up to 10 rules for a single basic IP ACL ID. Specify the action for the rule by selecting one of the following radio buttons: • Permit. Packets that meet the ACL criteria are forwarded. • Deny. Packets that meet the ACL criteria are dropped. Specify the egress queue that is used to handle all packets that match the ACL rule. From the menu, select the queue ID (0, 1, 2, 3, 4, 5, 6, or 7). This setting can override the existing queue ID for a packet. Manage Access Control Lists 210