Netgear FS728TLP Web Management User Guide - Page 82

ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches Remove a Custom VLAN  To remove a custom VLAN: 1. Select Switching > VLAN > Basic > VLAN Configuration. The VLAN Configuration screen displays. 2. Select the check box next to the VLAN that you want to remove. You cannot remove a default VLAN. 3. Click the Delete button. The VLAN is removed. Reset the VLAN Settings  To reset all default VLANs to their factory default settings and remove all custom VLANS: 1. Select Switching > VLAN > Basic > VLAN Configuration. The VLAN Configuration screen displays. 2. In the Reset section of the screen, select the Reset Configuration check box. A pop-up confirmation screen displays. 3. Confirm your selection by clicking OK. 4. Click the Apply button. The settings are saved. All default VLANs are reset to their factory default settings and all custom VLANS are removed. Manage VLAN Memberships The VLAN Membership screen lets you add member ports, member LAGs, or both to a default VLAN or custom VLAN. A port or LAG can be a tagged (T) or untagged (U) VLAN member: • Tagged. Frames transmitted from the port or LAG are tagged with the port VLAN ID. • Untagged. Frames transmitted from the port or LAG are untagged. Each port or LAG can be an untagged member of any VLAN. That is, a port or LAG can be an untagged member of multiple VLANs. By default, all ports and LAGs are untagged members of VLAN 1. As an example, in the following figure, ports 6, 7, 8, and 16 are tagged members of VLAN 4 and LAG 2 is an untagged member of VLAN 4. Configure VLANs and a Voice VLAN 82