Netgear FS728TLP Web Management User Guide - Page 290
Manage the SNMP Trap Receivers, Change an SNMP Community, Add a Trap Receiver
View all Netgear FS728TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches Change an SNMP Community To change the settings for an SNMP community: 1. Select System > SNMP > SNMP V1/V2 > Community Configuration. The Community Configuration screen displays. 2. In the Community Configuration table, select the check box to the left of the community for which you want to change the settings. 3. Change the settings. 4. Click the Apply button. The modified settings are displayed in the Community Configuration table. Remove an SNMP Community To remove an SNMP community: 1. Select System > SNMP > SNMP V1/V2 > Community Configuration. The Community Configuration screen displays. 2. In the Community Configuration table, select the check box to the left of the community that you want to remove. 3. Click the Delete button. The community is removed from the Community Configuration table. Manage the SNMP Trap Receivers A trap receiver can receive SNMPv1 or SNMPv2 trap messages from an SNMP agent such as the smart switch. The trap receiver monitors the smart switch for particular events or conditions, and generates trap messages based on these events or conditions. You can add up to six trap receivers. Add a Trap Receiver To add an SNMP trap receiver: 1. Select System > SNMP > SNMP V1/V2 > Trap Configuration. The Trap Configuration screen displays. Configure SNMP 290